Harbour HBRBC93B User manual

TIPS FOR USING & OPERATING YOUR BEVERAGE CHILLER (HBRBC93B)
SUPPORT: 1300 11 4357 |WWW.HARBOUR-APPLIANCES.COM.AU
93 Litre
Beverage Chiller
QUICK START GUIDE

Operating the Beverage Chiller
You can set and adjust the temperature in the
cabinet to anywhere within the cooling range
(5º C – 18º C) using the Thermostat Knob.
• “Normal”: warmest setting
• “Cold”: colder setting
• “Colder”: coldest setting
The “Off” setting turns the Beverage Chiller off.
The selected setting should be pointed to the top
of the dial.
For an overview and more information on your
Beverage Chiller, please see pages 10–11 of your
User Manual.
Support: 1300 11 43 57 WWW.HARBOURAPPLIANCES.COM.AU
Installation & First Use
Before installing your new Beverage Chiller, please
read all safety instructions in the user manual.
Place the Beverage Chiller on a sturdy, level floor
for quiet operation. If it is to be placed on carpet,
support it with a wooden board underneath. This
appliance is designed to be freestanding only and
should not be recessed or built in.
Before turning on your appliance for the first time:
°The beverage chiller must be rested for at least
half an hour before connecting power.
°Clean the inner chamber with lukewarm water
and a soft cloth.
°Do not connect cooler to electronic energy saving
plug and converter that can convert DC into AC
(E.g.: solar energy system. ship grid).
°Condensation or frost will form on the rear of
wine cooler when the compressor is running.
This is a normal function of cooler. Wiping away
the frost or condensation is not required as it will
eventually evaporate. The defrosted water will
be collected into a drain tank and then flow into
a water disposal pan above the compressor
before evaporating.
Tips & Tricks for using
your new Beverage Chiller
QUICK START GUIDE HBRBC93B
Version: 1.0