Harley Benton PA-100 User manual

PA-100
Power Attenuator
User Manual

Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
Internet: www.thomann.de
23.08.2022, ID: 406679 (V4)

Table of contents
1 General information................................................................................................................................. 5
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 6
1.3 Symbols and signal words............................................................................................................... 7
2 Safety instructions..................................................................................................................................... 9
3 Features....................................................................................................................................................... 11
4 Connections and controls................................................................................................................... 12
5 Technical specications....................................................................................................................... 14
6 Plug and connection assignment.................................................................................................... 15
7 Cleaning....................................................................................................................................................... 16
8 Protecting the environment.............................................................................................................. 17
Table of contents
PA-100 3
Power Attenuator

4PA-100
Power Attenuator

1 General information
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under www.thomann.de.
General information
PA-100 5
Power Attenuator

1.1 Further information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search Use the search function in the electronic version to nd the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
1.2 Notational conventions
This manual uses the following notational conventions:
General information
6PA-100
Power Attenuator

The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
CAUTION! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in minor injury if it
is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Letterings
General information
PA-100 7
Power Attenuator

Warning signs Type of danger
Warning – high-voltage.
Warning – danger zone.
General information
8PA-100
Power Attenuator

2 Safety instructions
This device is used to attenuate the output level of guitar amps. Use the device only as
described in this user manual. Any other use or use under other operating conditions is consid‐
ered to be improper and may result in personal injury or property damage. No liability will be
assumed for damages resulting from improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Safety
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking
hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and
choke! Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts
inside. Do not use the device if covers, protectors or optical components are missing or damaged.
Intended use
Safety instructions
PA-100 9
Power Attenuator

CAUTION!
Possible hearing damage
With loudspeakers or headphones connected, the device can produce volume levels that may cause temporary or permanent
hearing impairment. Do not operate the device permanently at a high volume level. Decrease the volume level immediately if you
experience ringing in your ears or hearing impairment.
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid
direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specied in the chapter
‘Technical specications’ of this user manual. Avoid heavy temperature uctuations and do not switch the device on immediately
after it was exposed to temperature uctuations (for example after transport at low outside temperatures). Dust and dirt inside can
damage the unit. When operated in harmful ambient conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by
qualied service personnel at regular intervals to prevent overheating and other malfunction.
NOTICE!
Damages caused by the connection to or the change of connections at an enabled amplier
Connect the device to or change connections always at the disconnected amplier, otherwise the amplier may be damaged.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some time
cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the surface and use a suitable underlay if neces‐
sary, i.e. felt pads or similar.
Safety instructions
10 PA-100
Power Attenuator

3 Features
Power soak for tube ampliers, ideal for use in rehearsal rooms, recording studios and on
stage.
nInput power: max. 100 W
nInputs for 4 Ω, 8 Ω, 16 Ω
nOutputs: mic (low-impedance), line, speaker
nLED as overload indicator
nControls: speaker level, line level
nSilent fan
nUsable as dummy load
nDI output with speaker simulation
Features
PA-100 11
Power Attenuator

4 Connections and controls
' ($ &
%
#
1[Full Power] | LED as overload indicator
2[Line Level] | rotary control for adjusting the signal attenuation at the line out
Connections and controls
12 PA-100
Power Attenuator

3[SPK Level] | rotary control for adjusting the signal attenuation at the speaker out. Turn this control counter-clockwise
to reduce the volume of the output signal.
The output signal is also being attenuated by approx. 3 dB with an open control ([SPK Level] in position ‘9’)! With a
closed control ([SPK Level ] in position ‘0’), a very low signal may remain audible through the connected speakers
when the device is used with a very high amp output signal.
4[MicMod] | low-impedance XLR output for connecting a mixing console or recording device.
5[Out Line] | line output for connecting an eects processor or power amp
6[Out Speaker] | output socket for connecting a passive speaker box
The device can be used as a load resistor when operated with tube amps without speaker box.
If you do not connect a loudspeaker and use one of the other two outputs, set the control to ‘2’ - ‘3’.
7[Input from Amplier] | input sockets for connecting an amplier
Always use only one of the three connectors at a time, according to the output impedance of the connected amplier
4 Ω, 8 Ω or 16 Ω!
NOTICE!
Damages caused by the connection to or the change of connections at an
enabled amplier
Connect the device to or change connections always at the disconnected ampli‐
er, otherwise the amplier may be damaged.
Connections and controls
PA-100 13
Power Attenuator

5 Technical specications
Input connections 3 × 1/4" phone socket
Output connections 1 × XLR, 3-pin (low-impedance)
2 × 1/4" phone socket
Input impedance 4 Ω, 8 Ω, 16 Ω
Input power max. 100 W
Dimensions (W × H × D) 190 mm × 110 mm × 140 mm
Weight 1.5 kg
Ambient conditions Temperature range 0 °C…40 °C
Relative humidity 20 %…80 % (non-condensing)
Noise reduction no
DI box yes
Speaker simulation yes
Dummy Load yes
Further information
Technical specications
14 PA-100
Power Attenuator

6 Plug and connection assignment
This chapter will help you select the right cables and plugs to connect your valuable equip‐
ment in such a way that a perfect sound experience is ensured.
Please note these advices, because especially in ‘Sound & Light’ caution is indicated: Even if a
plug ts into the socket, an incorrect connection may result in a destroyed power amp, a short
circuit or ‘just’ in poor transmission quality!
1 Signal
2 Ground, shielding
1 Ground, shielding
2 Signal
3 Bridged to pin 1
Introduction
1/4" TS phone plug (mono,
unbalanced)
XLR plug (unbalanced)
Plug and connection assignment
PA-100 15
Power Attenuator

7 Cleaning
Clean the externally accessible device parts regularly. The frequency of cleaning depends on
the operating environment: wet, smoky or particularly dirty surroundings can cause more
accumulation of dirt on the device parts.
nClean with a soft dry cloth.
nStubborn stains may be removed with a slightly damp cloth.
nNever use cleaners containing alcohol or thinner.
The fan grids of the device must be cleaned of any contamination, such as dust, etc. on a reg‐
ular basis. Before cleaning, switch o the device and disconnect mains-operated devices from
the mains. Only use pH-neutral, solvent-free and non-abrasive cleaning agents. Clean the unit
with a slightly damp lint-free cloth.
Components
Fan grids
Cleaning
16 PA-100
Power Attenuator

8 Protecting the environment
For the transport and protective packaging, environmentally friendly materials have been
chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that
they are collected for recycling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equipment Directive
(WEEE) in its currently valid version. Do not dispose with your normal household waste.
Dispose of this device through an approved waste disposal rm or through your local waste
facility. When discarding the device, comply with the rules and regulations that apply in your
country. If in doubt, consult your local waste disposal facility.
Disposal of the packaging mate‐
rial
Disposal of your old device
Protecting the environment
PA-100 17
Power Attenuator

Notes
18 PA-100
Power Attenuator

Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de