Harman Kardon FESTIVAL 60 User manual

FESTIVAL 60/80
Component Audio System
Harman Consumer Group
250 Crossways Park Drive
Woodbury, N.Y. 11797
1-800 422-8026 in the USA
A Harman International Company
Rev A 9/00 - PRELIMINARY RELEASE
TECHNICAL MANUAL
PRELIMINARY
RELEASE

TABLE OF CONTENTS
Festival 60/80 SPECIFICATIONS ....................................3
Festival 60/80 CONTROLS & FUNCTION.......................4
FESTIVAL 60/80 CONNECTIONS ...................................6
FESTIVAL 60/80 CONTROLS TUNER ............................8
FESTIVAL 60/80 CONTROLS CD CHANGER..............10
FESTIVAL 60/80 CONTROLS AUX ...............................12
FESTIVAL 60/80 BALANCE, BASS & TREBLE............13
FESTIVAL 60/80 CONTROLS CLOCK ..........................14
FESTIVAL 60/80 CONTROLS SURROUND SETUP ....15
FESTIVAL 60/80 CONTROLS SURROUND
OPERATION ...................................................................16
FESTIVAL 60/80 TROUBLESHOOTING .......................17
Festival 60 ASSEMBLY PARTS LIST............................18
Festival 80 ASSEMBLY PARTS LIST............................24
Festival 80 SUBWOOFER ASSEMBLY PARTS LIST...29
MECHANICAL ASSEMBLY FESTIVAL-60-US
TOP-UNIT-201-01 ...........................................................32
MECHANICAL ASSEMBLY FESTIVAL-60-US
TOP-UNIT-201-02 ...........................................................33
MECHANICAL ASSEMBLY FESTIVAL-60-US
TOP-UNIT-201-03 ...........................................................34
MECHANICAL ASSEMBLY FESTIVAL-60-US
TOP-UNIT-201-04 ...........................................................35
ADJUSTMENT Festival 60/80 US (AMP UNIT).............36
US AM ADJUSTMENT Festival 60/80
(TUNER UNIT) ................................................................37
US FM ADJUSTMENT Festival 60/80
(TUNER UNIT) ................................................................37
US RDS ADJUSTMENT Festival 60/80
(TUNER UNIT) ................................................................38
European MW (AM) ADJUSTMENT Festival 60/80
(TUNER UNIT) ................................................................39
European LW (AM) ADJUSTMENT Festival 60/80
(TUNER UNIT) ................................................................39
European FM ADJUSTMENT Festival 60/80
(TUNER UNIT) ................................................................40
European RDS ADJUSTMENT Festival 60/80
(TUNER UNIT) ................................................................41
Festival-60/80-US/EU (2BAND) (RDS)
ALIGNMENT PROCEDURE Figures 1-4 .......................42
Festival-60/80-US/EU(2BAND) (RDS)
ALIGNMENT PROCEDURE Figures 5 & 6 ...................43
Festival-60/80-US/EU(2BAND) (RDS)
ALIGNMENT PROCEDURE Figures 7 & 8 ...................44
Festival-60/80-EU (RDS) ALIGNMENT PROCEDURE
LOCATIONS....................................................................45
Festival-60/80-US (RDS) ALIGNMENT PROCEDURE
LOCATIONS....................................................................46
DISASSEMBLY DRAWING ............................................47
Festival 60/80 PACKING ................................................61
Festival 60 SPEAKER WIRING......................................62
Festival 80 SPEAKER WIRING......................................63
Festival 60 SPEAKER MECHANICAL ASSEMBLY.......64
Festival 80 SPEAKER MECHANICAL ASSEMBLY.......65
FUSE MATRIX................................................................66
PCB MATRIX ..................................................................67
FESTIVAL 60 DISPLAY BOARD ...................................68
FESTIVAL 60/80 IR SENSOR, POWER INDICATOR,
VOLUME CONTROL,
VIDEO & FUNCTION BOARDS .....................................68
FESTIVAL 60/80 TUNER BOARD .................................69
FESTIVAL 60/80 CD MAIN BOARD ..............................69
FESTIVAL 60/80 CD INDICATOR BOARD ...................70
FESTIVAL 60/80 CD CONNECTOR BOARD................70
PRELIMINARY RELEASE 1
Component Audio System Harman Kardon
Festival 60/80

FESTIVAL 60 MAIN AMP, AMP INDICATOR,
PRIMARY AMP
& SECONDARY AMP BOARDS ....................................71
FESTIVAL 80 FILTER/TERMINAL & BASS AMP
BOARDS .........................................................................72
FESTIVAL 80 SubLR AMP & SubCS AMP BOARDS ..73
FESTIVAL 60/80 PRE-AMP BOARD .............................74
FESTIVAL 60/80 HEADPHONE BOARD.......................74
FESTIVAL 60/80 ELECTRICAL PARTS LISTS.............75
INTEGRATED CIRCUIT DIAGRAMS 1 .........................98
Festival BLOCK DIAGRAM
(60/80 European 3 Band) ...............................................99
Festival BLOCK DIAGRAM
(60/80 US, 60/80 European 2 Band) ...........................100
Festival CD SCHEMATIC DIAGRAM
(60/80 US & Europe) ....................................................101
Festival SUBWOOFER SCHEMATIC DIAGRAM
(80 European) ...............................................................102
Festival CD Unit TUNER SCHEMATIC DIAGRAM
(60/80 European)(2BAND)(RDS)..................................103
Festival CD Unit TUNER SCHEMATIC DIAGRAM
(60/80 European)(RDS) ................................................104
Festival CD Unit TUNER IC VOLTAGE CHART
(60/80 European)(RDS) ................................................105
Festival CD Unit TUNER SCHEMATIC DIAGRAM
(60/80 US)(RDS)...........................................................106
Festival CD Unit TUNER IC VOLTAGE CHART
(60/80 US)(RDS)...........................................................107
Festival CD Unit TUNER IC VOLTAGE CHART
(60/80 European 2 BAND)(RDS) .................................108
Festival MAIN AMP PCB SCHEMATIC DIAGRAM
(60 US & European) .....................................................109
Festival AMP UNIT BLOCK DIAGRAM
(60 US & European) .....................................................110
Festival TOP UNIT BLOCK DIAGRAM
(60 European) ...............................................................111
Festival TOP UNIT BLOCK DIAGRAM (60 US)..........112
Festival TOP UNIT SCHEMATIC DIAGRAM
(60 US & European) .....................................................113
Festival SUBWOOFER SCHEMATIC DIAGRAM
(80 European) ...............................................................114
Festival TOP UNIT SCHEMATIC DIAGRAM
(60 US & European) .....................................................115
Festival TOP UNIT SCHEMATIC DIAGRAM
(60 US) .........................................................................116
Festival TOP UNIT SCHEMATIC DIAGRAM
(60 European) ...............................................................117
Festival TOP UNIT BLOCK DIAGRAM
(80 European) ...............................................................118
Festival TOP UNIT SCHEMATIC DIAGRAM
(80 US & European) .....................................................119
Festival TOP UNIT SCHEMATIC DIAGRAM
(80 US & European) .....................................................120
Festival TOP UNIT SCHEMATIC DIAGRAM
(80 European) ...............................................................121
Festival TOP UNIT BLOCK DIAGRAM (80 US)..........122
Festival SUBWOOFER UNIT BLOCK DIAGRAM
(80 US & European) .....................................................123
Festival SUBWOOFER SCHEMATIC DIAGRAM
(80 US) .........................................................................124
Festival SUBWOOFER SCHEMATIC DIAGRAM
(80 European) ...............................................................125
Festival SUBWOOFER SCHEMATIC DIAGRAM
(80 European) ...............................................................126
Festival SUBWOOFER SCHEMATIC DIAGRAM
(80 European) ...............................................................127
Festival SUBWOOFER SCHEMATIC DIAGRAM
(80 US) .........................................................................128
Festival SUBWOOFER SCHEMATIC DIAGRAM
(80 European) ...............................................................129
Festival SUBWOOFER SCHEMATIC DIAGRAM
(80 US) .........................................................................130
Festival TOP UNIT SCHEMATIC DIAGRAM (80 US).131
PRELIMINARY RELEASE 2
Component Audio System Harman Kardon
Festival 60/80

PRELIMINARY RELEASE 3
Component Audio System Harman Kardon
Festival 60/80
Festival 60/80 SPECIFICATIONS
Power Amplifier
Power Output: Stereo: 8 ohms (20 – 20kHz, <0.09%THD) 35 watts 35 watts
Surround: Left/Right/Center @8 ohms (20 – 20kHz, <0.09%THD) N/A 35 watts
Surround: Rear Channels: 4 ohms (20 – 20kHz, <0.09%THD) N/A 20 watts
High-Current Capability: Stereo & Main Channel Amps +/–35 amps +/–35 amps
Power Bandwidth @8 Ohms 10Hz – 60kHz 10Hz – 60kHz
Frequency Response (1W +0/–3dB) 0.2Hz – 140kHz 0.2Hz – 140kHz
Rise Time 0.8µSec 0.8µSec
Slew Rate 105V/µSec 105V/µSec
S/N Ratio (Reference, Rated Power, A-Wtd.) 112dB 112dB
Subwoofer Output 850mV N/A
Subwoofer Amplifier Power @4 ohms (20 – 120Hz, <0.09%THD) N/A 95 watts
Subwoofer Amplifier High-Current Capability N/A +/– 60 amps
Dimensions (H x W x D) 4 x 10-1/4 x 11-3/16"/102 x 260 x 284mm N/A
Weight 11.9lbs/5.4kg N/A
FM Tuner
Tuning Range (100kHz – step) 87.5MHz – 108MHz 87.5MHz – 108MHz
Usable Sensitivity, Stereo, A-Wtd. (S/N 30dB) 18dBf 18dBf
50dB Quieting Sensitive, Stereo, A-Wtd. (97.9MHz) 42dBf 42dBf
S/N Ratio 65dBf, Mono/Stereo, A-Wtd. (97.9MHz) 70dB/65dB 70dB/65dB
Capture Ratio 1.6dB 1.6dB
Selectivity, Adjacent Channel, +/– 400kHz (97.9MHz) 55dB 55dB
IF Rejection (97.9MHz) 120dB 120dB
THD 1kHz, 65dBf 0.30% 0.30%
AM Tuner
Tuning Range (10kHz – step) 530kHz – 1710kHz 530kHz – 1710kHz
Sensitivity (S/N 20dB) 600kHz/1000kHz, 1400kHz 900µV/m / 630µV/m 900µV/m / 630µV/m
Alternate Channel Selectivity (6dB S/N Sensitivity), +/–10kHz 45dB 45dB
Image Rejection (6dB S/N Sensitivity) 40dB 40dB
IF Rejection (6dB S/N Sensitivity) 60dB 60dB
7-Disc CD Changer
System Compact Disc Digital Audio
D/A Converter 4X oversampling filter, 3D Bitstream™, Secondary delta sigma noise shaper
Error Correction CIRC System CIRC System
Frequency Response 20Hz – 20kHz, +/–3dB 20Hz – 20kHz, +/–3dB
THD 0.03% 0.03%
Dynamic Range 90dB 90dB
S/N Ratio 82dB 82dB
Channel Separation 70dB 70dB
Dimensions (H x W x D) 4 x 10-1/4 x 11-3/16"/102 x 260 x 284mm 4 x 10-1/4 x 11-3/16"/102 x 260 x 284mm
Weight 7.1lbs/3.2kg 7.1lbs/3.2kg
Controller
Input Sensitivity/Impedance 150mV/100kohm 150mV/100kohm
Frequency Response (1W +1/–3dB) 7Hz – 100kHz 7Hz – 100kHz
S/N Ratio (Reference, Rated Power, A-Wtd.) 100dB 100dB
Tone Control Range (+/–)Bass 50Hz/Treble 10kHz +/–10dB +/–10dB
Surround Modes N/A Pro Logic
®
, Movie, Music, Hall
Dimensions (H x W x D) 5-7/16 x 10-1/4 x 11-3/16"/138 x 260 x 284mm 5-7/16 x 10-1/4 x 11-3/16"/138 x 260 x 284mm
Weight 7.3lbs/3.3kg 7.3lbs/3.3kg
Subwoofer/Amplifier
Driver N/A Dual 8"
Frequency Response +/–3dB N/A 32Hz – 150Hz
Sensitivity 2.83VRMS @ 1m N/A 87dB
Impedance N/A 4 ohms nominal
Dimensions (H x W x D) N/A 15-3/4 x 18 x 15-5/8"/400 x 457 x 397mm
Weight N/A 56lbs/25.5kg
Speakers
High-Frequency Driver 1" Flare-Dome Tweeter 1" Flare-Dome Tweeter
Midrange/Bass Driver 6" Co-polymer 3-1/2" Laminated Fiber
Crossover 4kHz 150Hz, 4kHz
Frequency Response +/–3dB 50Hz – 20kHz 150Hz – 20kHz
Sensitivity 2.83VRMS @ 1m 87dB 87dB
Impedance 8 ohms nominal 8 ohms nominal
Dimensions (H x W x D) 10-1/8 x 6-7/8 x 13-1/2"/257 x 175 x 343mm 3-3/4 x 4-1/8 x 6"/95 x 105 x 152mm
Weight 11lbs/5kg 0.5lbs/0.23kg
Festival60 Festival80

PRELIMINARY RELEASE 4
Component Audio System Harman Kardon
Festival 60/80
Festival 60/80 CONTROLS & FUNCTION
festival 60
Power
Open
Close
56
7
8
9
10
11
12
1
2
4
3
festival 80
festival 60
festival60
60
festival60

PRELIMINARY RELEASE 5
Component Audio System Harman Kardon
Festival 60/80
Product Over view Front
Source Buttons
Press desired source button to select input source.
Sound Keys
Press to access sound quality and tone control
functions for all sources.
Clock
Press to access the clock, sleep and wake functions.
Remote Control Receiver
Point remote control at this area for optimum
remote operation. (Remote range is 15 feet.)
Option Buttons
These buttons change function based on the source
being used. Press to select functions specific to each
source. Some functions require more than one press
for adjustment or selection.
Selection Buttons
In the Tuner mode these buttons store or recall preset
stations,in the CD mode they select discs, and in the
Aux mode they select Aux inputs.In the Clock mode they
adjust the time and the wake time setting.
Play Controls
Press to select, adjust and operate functions specific
to each source. Some functions require more than
one press for adjustment or selection.
Volume Knob
Rotate to adjust volume level.
Headphone Jack
Accepts 1/8" headphone connector.
Power
Press lightly to put the system into Standby
(which saves all settings). Press firmly to turn
unit completely Off. The power light is green when
the system is On and orange when the system is
in Standby.
Open/Close
Press to open and close the CD drawer.
Power Indicator
(Festival 60 only)
This indicator is green when the system is On and
orange when the system is in Standby.
Remote
Place batteries (included) in the remote as shown
below. Most of the buttons and controls on the
remote have functions identical to the buttons and
controls on the control unit. The remote control
requires two AA batteries. The range is 15 feet.
Power
Press to put the unit in Standby.
Sleep
Press to put the system into the Sleep mode. (See
clock section on page 13 for more information).
Source Buttons
Press desired source button to select an input source.
Selection Buttons
Press to scroll through and select functions
specific to each source.
Volume Controls
Press Volume to adjust sound level.
Press Mute to temporarily silence speaker output.
Play Controls
Press to select, adjust and operate functions
specific to each source.
Festival 80 only
Surround
Press to access surround sound control functions.
Center
Press to access center speaker control functions.
Wrap
Press to adjust surround sound effects.
Tuner
Mute
Power
Sleep
CD
Aux
festival 60 remote
Tuner
Wrap
Mute
Surround
Power
Sleep
Center
CD
Aux
festival 80 remote
Slide cover
to expose
battery
compartment
1
2
4
5
6
7
8
9
10
11
12
3

PRELIMINARY RELEASE 6
Component Audio System Harman Kardon
Festival 60/80
FESTIVAL 60/80 CONNECTIONS
Connections
Electronics
Connect the Ribbon Wire
Push the plugs on the ribbon wire firmly
into corresponding connectors on the Controller
until they “click”into place. Slip the wire edges
beneath cable management clips.
Connect the Antenna
FM
Connect the included antenna or an external
FM antenna to the FM (75 ohm) connector.
The included 300 ohm to 75 ohm adapter is
required for connections from twin lead or
inside dipole antennas.
AM
Assemble the included AM Loop Antenna and
connect it to the AM and GND connectors. If
an external AM antenna is used, follow the
instructions supplied with the antenna.
Connect the Power Cord
Plug the female end of the power cord
(provided) into the AC power jack on the rear of
the unit. Do not plug the male end into an AC
outlet until all other connections have been
made. In addition to the power connection
to the controller, Festival 60 has a power
connection to the Amplifier and Festival 80 has
a power connection to the Powered Subwoofer.
E
A
A
Optional Connections
Aux 1, 2 & 3 Inputs
Connect the audio and video outputs of up to
three external sources (DVD,VCR, cassette,
etc.) to these jacks. Connect computers and
portable audio products to the R/L jack linked
to Aux 2. If the R/L jack is used, the Aux 2 input
is disabled.
Aux 1 Output
Connect these jacks to the audio and video
inputs of a VCR or cassette deck to record
Festival’s output. Connect the “To TV” output
jack to the video input of your TV, projector or
video monitor to view the video source selected
by Festival.
Remote IR Extension
If the Festival's front panel remote control
receiver is blocked, connect an external IR
(InfraRed) sensor to this jack and place
sensor in an unobstructed area.
Speakers
Festival 80
Position the Speakers
Festival 80 includes five 2-way satellite
speakers and one powered subwoofer. The
satellite speakers all connect to the subwoofer.
The subwoofer connects directly to the
controller.
Connect the Speakers
The five speakers each have a pair of spring-
loaded wire clips.The subwoofer has five pairs
of corresponding connectors. Run a length of
the provided wire from each speaker to the
subwoofer. Cut the wire and strip the two leads
at each end. Attach the leads at the speaker to
the red and black clips.To ensure proper
polarity, attach the leads at the subwoofer to the
corresponding colored spring clips.Repeat for
all four remaining speakers.
Connect the Subwoofer
Connect the round multi-pin connector of the
subwoofer cable to the subwoofer jack on
the Controller. Connect the other end to the jack
on the back of the subwoofer as shown.
Festival 60
Position the Speakers
Festival 60 includes two 2-way “bookshelf”
speakers that can be placed almost anywhere
in a room and still provide superior sound
quality. Both speakers connect directly to the
controller.
Connect the Speakers
Both speakers have a pair of screw-type wire
connectors. The amplifier has two pairs of
similar connectors. Run a length of the provided
wire from each speaker to the amplifier. Cut
the wire and strip the two leads at each end.
Unscrew the knobs on the back of the speaker
to reveal a hole in each post. Insert one lead
in the red post hole and the other in the black,
then tighten. To ensure proper polarity, attach
the leads at the amplifier to the two
corresponding colored connectors.
Connect the Subwoofer (optional)
If you are adding an optional powered
subwoofer to this system, connect the
subwoofer to the jacks on the back of the
amplifier.
C
1
A
E
2
3
4
5
6
C
7
8
9
12
11
10

PRELIMINARY RELEASE 7
Component Audio System Harman Kardon
Festival 60/80
harman/kardon
harman/kardon harman/kardon harman/kardon
harman/kardon
RL R
Aux 3
In Aux 2 In
Video Video
LR
R/L
Aux 1
In
Video
LR
Aux 1
Out
Video To TV
L
or
C
D
E
1
6
Controller
CD Changer
Powered
Subwoofer
Satellite
Speakers
Bookshelf
Speakers
Amplifier
Subwoofer
Speaker
Output
R
R
L
L
4 Ohms min.
120 W
A Harman International Company
AC 230V/50Hz
In Remote
IR
AC 230V / 50Hz
35 W
Out
Festival Controller
Harman Kardon
Northridge, CA
Made in U.S.A
Harman Consumer Manufacturing
A Harman International Company
Subwoofer
Festival Amplifier
Harman Kardon
Northridge, CA
Made in U.S.A
Harman Consumer Manufacturing
=
B
A
Antenna
FM 75 Ohms
AM Loop
A Harman International Company
Festival CD Changer
Harman Kardon
Northridge, CA
Made in U.S.A
Harman Consumer Manufacturing
B
E
E
Connectors
Ribbon wire
Speaker wire
Subwoofer cable
(Festival80 only)
Antenna
Power cord
A
B
C
D
E
LR
harman/kardon
harman/kardon
harman/kardon
D
6
25
3
4
7
11
10
1
3
1
3
91
8
5
12
B
B
E
E
E
C
A

PRELIMINARY RELEASE 8
Component Audio System Harman Kardon
Festival 60/80
Option Buttons
Selecting the frequency band
Press repeatedly for desired frequency band,
AM or FM.
Tunes all FM stations.
Tunes all FM stations and plays
them in mono.
Tunes all AM stations.
Selecting the Seek mode
Press repeatedly for desired Seek mode.
(See Seek under Play Controls on opposite page.)
Seeks all active stations in selected
band.
Seeks only selected RDS type
(FM only).See RDS on page 9 for
more information.
Displaying RDS messages
(FMonly)
Press repeatedly for desired RDS display mode.
Displays station identification and RDS
program type in message bar.
Displays additional RDS information in
message bar.
Selector Buttons
In Tuner mode, the Selector Buttons become
station “presets.”They instantly store or recall
stations, includingthe band and mono/stereo
mode selections.
Storing Presets
Tune to the station you want to store, then
press and hold the unlit numbered button until
appears in the display.
The selected button will light, indicating a stored
preset. The system stores up to 20 presets.
Storing a preset in a lit button automatically
overrides the previously stored preset.
Recalling Presets
Press a lit numbered button.
Press or to access more available
presets.
To clear all Presets
Turn the system completelyoff by firmly pressing
the Power switch on the Control Unit so that no
lights are illuminated.Then turn the system back
on and immediately press the Stop button in
the Play controls (see below).The message bar in
the Tuner screen should now read
.
Note: Depending upon the previous mode selected,
the Stop button may not be illuminated.
Play Controls
Seek
Press to skip back or forward to the next
station depending on mode selected.
(See SEEK in the Options section on this page)
Normal Mode
Seek will search for all stations.
RDS Mode
Seek will search for selected RDS type stations.
(See RDS explanation on the following page).
Tune
The mode, selected with the Options
button affects the operation of the
Tune buttons. You cannot tune in Seek RDS. If you
want to tune, select Seek .
Tuning Stations
When the Seek mode is, press and release
the Tune buttons to tune one frequency step at a time.
Press and hold T une buttons for a quick scroll
through all frequencies.
Selecting RDS type for Seek (FM only)
When the Seek mode is, the Tune buttons
become Select buttons. Press and release them to
scroll through and select RDS types.
Press and hold Select buttons for a quick scroll
through RDS types.
Tune
Seek
Select a Source
TUNER
PRESETS
Aux
CD
Surround
Bass Treble
Tuner
PM
AM
FM
TRACK
PRESET
TIME
STATION
Tuner
Festival features a highly precise radio
tuner, including 20 presets and 2 different
seek functions. Select Tuner to access all
Tuner functions and controls.
FESTIVAL 60/80 CONTROLS TUNER

PRELIMINARY RELEASE 9
Component Audio System Harman Kardon
Festival 60/80
Remote
Tuner functions
Many of the buttons and functions of the remote
mimic the buttons and functions of the control unit
in Tuner mode.
The Play Control buttons on the remote function
identically to Play Controls on the control unit.
Selecting Presets using the remote
Press and release the Select buttons to
choose programmed presets one at a time.
Press and hold Select buttons for a fast
scroll through programmed presets.
RDS
Festival displays text messages, including
station identification and program type, from FM
stations broadcasting RDS (Radio Data System)
information.
When available, additional information may be
displayed by selecting with the
button.
Seek RDS
Seeks only stations of the selected RDS type.
However, only stations broadcasting RDS
information will be tuned.
Seeking for specific RDS signals
Select RDS with the Option Button.
Press repeatedly to select RDS type
(displayed in message bar).
Press to automatically find the next
station of the selected RDS type.
Seek
Select
Tuner
Mute
Power
Sleep
CD
Aux
festival 60 remote

PRELIMINARY RELEASE 10
Component Audio System Harman Kardon
Festival 60/80
FESTIVAL 60/80 CONTROLS CD CHANGER
Option Buttons
Clearing a CD sequence
Press to erase the current sequence. Then select a
new sequence or push Play to build and
play a sequence of loaded disks. (The sequence is
shown in the message area of the display.)
Selecting the play mode
Press repeatedly to select play option.
Plays all sequenced CDs once.
Plays all sequenced CDs, then
repeats sequence.
Randomly plays all songs from
selected CDs.
Selector Buttons
In CD mode, the Selector Buttons allow you to
load, select and sequence CDs.
To load CDs into empty “slots”
Press any unlit CD button (unlit =empty “slot”).
The CD drawer will open automatically.
Place a CD in the CD drawer.
Note: Place 3-inch discs in slot 1 only. Placing
3-inch discs in any other slot will damage
Festival and the disc.
Press OPEN/CLOSE or the button beneath the
blinking disc number to close drawer.
Selecting a single CD to play
Press a lit CD button (lit=loaded CD).
Press to play CD.
Creating a sequence
Press CLEAR to erase previous sequence.
PresslitCDbuttonsin the orderthat youwishto listen.
Press to start playing sequence.
To eject a specific CD
Press lit button of CD you wish to unload.
Press OPEN/CLOSE to eject CD.
Remove CD.
Press OPEN/CLOSE to close drawer.
Play Controls
Skip
Press to skip back to the previous track or forward
to the next track on the disk.
Press and release to skip one track at a time.
Press and hold to scroll quickly through the tracks.
Search
Press to audibly search back or forward
through a track.
Press and release to search a few seconds
at a time.
Press and hold for a continuous audible search
through a track.
Pause
Press to pause current CD at the point of play.
Press to resume play from point of pause.
Stop
Press to stop play of current CD.
Play
Press to begin play of selected CD or sequence.
Note: It may take a few moments for Festival to
load CD before play begins.
Select a Source
CD Changer
13
9
14
10
15
11
16
12
CDS
Aux
CD
Surround
Bass Treble
Tuner
CD TRACK TIME
Festival features a programmable 7-disc
CD Changer that accepts both standard-
sized CD's and one 3-inch CD. Festival's
sequencing feature allows you to play
through loaded CDs in any order you
choose. Press CD to access all CD
functions and controls.

PRELIMINARY RELEASE 11
Component Audio System Harman Kardon
Festival 60/80
Open/Close
Press to open or close CD drawer. The CD drawer
can also be closed by gently pushing the drawer
toward Festival.
Festival will eject the currently selected CD, which
is displayed in the upper left corner of Display.
When closing, the CD drawer may appear to
“stutter”or hesitate. This action actually ensures
proper alignment of the discs and is part of
Festival’s normal operation.
Note: Place 3-inch discs in slot 1 only. Placing
3-inch discs in any other slot will damage
Festival and the disc.
Remote CD Functions
Many of the buttons and functions of the remote
mimic the buttons and functions of the control unit
in CD mode.
Play Control buttons function identically to Play
Controls on the control unit.
Selecting CDs using the remote
Press and release
choose previous or next CD in sequence.
Press and hold the
a fast scroll through CDs in sequence.
festival 60
the Select buttons to
Select buttons for
Tuner
Mute
Power
Sleep
CD
Aux
festival 60 remote

PRELIMINARY RELEASE 12
Component Audio System Harman Kardon
Festival 60/80
FESTIVAL 60/80 CONTROLS AUX
Select a Source
Selector Buttons
Aux 1, 2 & 3
Press to select an auxiliary input.
Aux Inputs & Outputs
Aux 1, 2 & 3 In
RinL
Connect these jacks to the audio PLAY/OUT jacks
of an external audio source.
Video
Connect this jack to the composite video
PLAY/OUT jack of your VCR.
AUX
AUX
Aux
CD
Surround
Bass Treble
Tuner
RL R
Aux 3
In Aux 2 In
Video Video
LR
R/L
Aux 1
In
Video
LR
Aux 1
Out
Video To TV
L
or
R/L (Aux 2 Only)
Note: The small 3.5 mm (1/8") stereo jack (R/L,
above) may be used for computers or portable
audio products.When this jack is used, it
automaticallyoverrides the product connected
to the main Aux 2 audio inputs.
Use this jack when the external audio is delivered
through a single cable or an adapter that combines
separate stereo cables in one plug. With this jack,
the source may be stereo or mono, but the plug
must be a 3.5 mm (1/8") stereo mini-plug.
Aux 1 Out
R Out L
Connect these jacks to the RECORD/IN jacks of
an external recorder (cassette recorder, VCR, etc.).
Video
Connect this jack to the composite video
RECORD/IN jack of your VCR.
To TV
Connect this jack to the composite VIDEO/IN jack
of your TV.
Aux
Festival allows you to connect up to 3
external audio/video sources (DVD,
VCR, cassette deck, etc.). Two of the
sources (Aux 2 and Aux 3) can be
recorded when they are in use. When
video sources are connected, Festival
also functions as a video switcher. For
both audio and video, Festival does
not control the external sources, but
provides the ability to choose between
them. Press Aux to select an external
source.

PRELIMINARY RELEASE 13
Component Audio System Harman Kardon
Festival 60/80
FESTIVAL 60/80 BALANCE, BASS & TREBLE
Selector Buttons
Adjusting the Bass
Press
Press
to
to
increase
increase
or
or
press
press
to
to
decrease
decrease
the
the
amount
amount
of
of
Bass.
Adjusting the Treble
Treble.
Selector Buttons
To move the sound to the left
Press the button repeatedly until the desired
effect is achieved.
To move the sound to the right
Press the button repeatedly until the desired
effect is achieved.
To return the sound to the center
Press the lit center selector button. It illuminates
when the balance is shifted left or right.
Option Buttons
Increasing the bass output
Bass Plus “Boosts”the amount of bass, regardless
of the current bass/treble setting. The effect is
most noticeable at low volumes. Press to turn
Bass Plus feature on or off.
More bass.
Less bass.
Balance
Bass Treble
Festival 60 Only
Press the Balance button to access speaker
output controls.
Balance allows you to “Move”the sound right or
left until the volume level appears to sound the
same from each speaker.
Customizing the Sound
AUX
Aux
CD
Surround
Bass Treble
Tuner
CD TRACK TIME
BASS TREBLE
Festival allows you to manipulate the
quality and tone of the sound to match
your individual preferences. The bass and
treble controls affect the entire system, not
just the current music source.
Press the Bass Treble button to access
sound equalization functions and controls.

PRELIMINARY RELEASE 14
Component Audio System Harman Kardon
Festival 60/80
FESTIVAL 60/80 CONTROLS CLOCK
Festival features a multi-function,
programmable clock. Before you can
use any of festival's clock functions,
you must first set the correct time.
Press the button to access all clock
functions and controls.
Selector Buttons
Setting the time of day
Press and release the or Time button to
adjust by one minute at a time.
Press and hold the or T ime button for a fast
scroll through time.
Option Buttons
Note: T ime of day must be set first using
Selector buttons before setting wake times.
To wake up to music
The Wake mode automatically turns Festival on
and begins playing music at any time you choose.
Press button to mode.
Press the or wake/button until desired wake
time is displayed in the message bar.
Select the music source you wish to wake to.
If waking to the CD, make sure CDs are loaded
and sequenced as desired.
Lightly press POWER on the unit or the remote
to place Festival in Standby mode.
Festival automatically turns itself on and begins
playing the selected source at the set time each
day until the wake function is turned off.
Press button to mode.
To set Sleep timer
In Sleep mode, Festival dims its screen and plays
music from the selected source for a designated
amount of time, then turns itself off.
Press button repeatedly until desired
play time is displayed (, ,o r minutes).
When time has expired, Festival places itself in
Standby, allowing Wake and Sleep functions to
not interfere with each other.
To turn off Sleep function
Press button repeatedly until
appears in the display.
To select a time standard
Press repeatedly until desired time display appears.
Shows time in 12 hour time.
(with a.m. or p.m.)
Shows time in 24 hour (“military”) time.
(no a.m. and p.m.)
Turns Clock display off.
Set The Time
Aux
CD
Surround
Bass Treble
Tuner
PM
TIME
WAKE TIME
Clock

PRELIMINARY RELEASE 15
Component Audio System Harman Kardon
Festival 60/80
FESTIVAL 60/80 CONTROLS SURROUND SETUP
Select a Source
Aux
CD
Surround
Bass Treble
Tuner
CD TRACK TIME
Surround Setup
Option Buttons
To turn rear speakers on or off
Press to activate surround speakers (displaysays
) or deactivate (displaysays ).
Note: If no surround speakers are connected,this
setting should be NO. When they are connected,
do not use this feature to mute their output.
To turn center speaker on or off
Press to activate or deactivate center
speaker. When the center speaker is turned off,
Festival automatically generates a “phantom
center”from the right and left front speakers.
Note: If no center speaker is connected, this
setting should be NO. When a center speaker is
connected,do not use this feature to mute its
output.
To turn test tone on or off
Press to turn test tone or .
Use the Play Control buttons to select and adjust
the output of the speakers until the volume is
equal from all speakers.
To adjust the output level of individualspeakers in
surround mode, press to .
Press to select speaker to adjust.
Press to adjust speaker output.
Repeat until all output levels are equal from
all speakers.
Play Controls
Adjusting the reference speaker level
When test tone is , you should hear a static-
like hiss from the left front speaker and the LF
light on the display will blink. This is the reference
speaker and can only be adjusted from the main
volume control on the amplifier.
Selecting other speakers for level adjustment
Press and release to select individual speakers
test tone adjustment. Press and hold to move
continuously between speakers for easy
comparison.
Adjusting other speaker levels
Press and release to incrementally adjust the test
tone level for the selected speaker. Press and hold
for continuous adjustment.
Level
Level
Select
Select
LR RR
RF
CNTR
LEVEL
LF
LR RR
RF
CNTR
LEVEL
LF
for
Remote Surround Sound Functions
The remote duplicates some
Sound buttons on the control
to select and adjust some
while you are seated in
perfect customization.
Tuner
Wrap
Mute
Surround
Power
Sleep
Center
CD
Aux
festival 80 remote
the
Surround
listening
of
unit.
the Surround
Use
Setup
area
the remote
features
for
Festival 80 Only
Festival allows you to customize the Surround
Sound features to suit your personal needs.
Press the Surround button, then the setup
button to access Surround Sound functions
and controls.

PRELIMINARY RELEASE 16
Component Audio System Harman Kardon
Festival 60/80
FESTIVAL 60/80 CONTROLS SURROUND OPERATION
Customizing the Sound
Aux
CD
Surround
Bass Treble
Tuner
CD TRACK TIME
Surround
Operation
Option Buttons
Choosing a Surround mode
Press repeatedly for desired Surround mode.
Duplicates the acoustics of a movie
theater. This mode activates Festival's
Dolby Pro Logic feature which reads
the surround sound effects in movies.
Creates optimal surround for
music sources.
Hall simulator.
Surround sound turned off.
Adjusting the output of your center speaker
Press repeatedly for desired center speaker mode.
Center speaker loudness is equal to
other speakers.
Increases center speaker loudness
without affecting other speakers. This is
a convenient way to selectivelyincrease
the center channel volume of movies or
other video or DolbyPro Logic sources.
Configuring your system for surround sound
Press to access surround speaker setup functions.
Pressing setup will change the function of some
buttons and activate functions of others.
Selector Buttons
An innovative Festival feature called Wrap allows
you to control the feeling of spaciousness in a
listening area by creating the illusionof distance
between the front and surround speakers.
Movie and Music surround modes begin with a
factory default setting for the Wrap effect. The
Movie and Music settings may be adjusted by
using the selector buttons on the console. Press
to decrease or to increase how far the sound
“wraps”around the listening area. Dots on the
Wrap indicator will light to show changes to the
Wrap setting.
The Movie mode is based on Dolby Pro Logic,
a surround sound process that uses information
encoded in two-channel stereo recordings to
produce four distinct channels (left, center, right
and surround). Dolby Pro Logic is used in movies,
television programs and some music recordings.
When the word REFERENCE appears in the Wrap
Indicator, the Wrap circuits are turned off for
standard Pro Logic operation. Increase or decrease
the amounts of Wrap as shown above to suit your
listening taste.
WRAP
REFERENCE
Festival 80
Festival 80 is equipped to deliver
superior home theater sound for movies
and music. Festival 80 uses a 5-speaker
system and a subwoofer to create a
realistic effects and surround imaging.
Press Surround to access all surround
functions and controls.

PRELIMINARY RELEASE 17
Component Audio System Harman Kardon
Festival 60/80
FESTIVAL 60/80 TROUBLESHOOTING
If the problem is...
No lights on when POWER button pressed:
No sound is heard:
No sound is heard: (Festival 60 only)
No sound is heard: (Festival 80 only)
Dolby Surround does not work on center and
surround channels: (Festival 80 only)
Selecting a Video source produces sound but
no picture:
The TV picture does not match the sound:
No output from the left or right channels:
(Festival 60 only)
No output from one or more channels:
(Festival 80 only)
No center channel output:
Tuner sound has a large amount of
interference, or the “Stereo”display is not
illuminated, or Tuner sound distorts and/or
volume level is too low:
Tuner is intermittent or continuously buzzing
or hissing:
Festival does not respond to remote control:
Make sure that the...
Unit is plugged into a live outlet.
Power switch was pressed all the way in and released.
Speakers are connected.
Unit has not been muted.
Correct input function selector button is pressed.
Amplifier is plugged in.
Ribbon cable is attached to amplifier.
Subwoofer is plugged in.
Subwoofer is connected to the Controller.
Correct surround mode is selected.
Center and/or surround speakers are selected.
Surround and center levels are turned up.
You are using a surround encoded source.
“T o TV” output is connected to the video input on
your TVs.
Video sources are properly connected to receiver.
Video/antenna Switch on TV is set to Video.
Wires to that speaker are not disconnected/damaged.
Balance is centered.
Wires to that speaker are not disconnected/damaged.
Test tone levels for that speaker are audible.
Center channel speaker is selected.
Phantom mode is not active.
Unit is in the Pro Logic mode.
Center channel level is properly adjusted.
Center speaker is connected.
The antenna is properly connected.
The antenna is properly located.
The antenna is set in the proper direction.
The antenna is adequate to receive the
desired station.
The unit is away from fluorescent lights, motors
and other electrical appliances.
Remote sensor on front of Festival is unobstructed.
Remote is pointed directly at the remote sensor.
Remote batteries are still good.

PRELIMINARY RELEASE 18
Component Audio System Harman Kardon
Festival 60/80
PART NUMBER DESCRIPTION QTY
CIS1001 FESTIVAL 60 COMPACT IMS 1
SA1717 “PACKED UNIT,FESTIVAL60 US” 1
PM1397 “Master Carton, Festival60" 1
SA1722 TOP UNIT CVR ASSY (60-US) 1
XX1312 Bushing PA BLACK 1
XX1296 LEG (RUBBER PAD) 4
SA1711 INTERCONNECT ASSY. 1
SA1712 FUNCTION/VIDEO PCB ASSY. 1
SA1713 PUSHBUTTON ASSY. 1
SA1714 CABINET SUB-ASSY. 1
SA1715 PLASTIC CAB ASSY. 1
332502-001 FITTING 1
SC1278 Screw BND T+ 2
SC1288 ”SCREW, 10mm x 3mm," 3
332497-001 BUTTON IR 1
332503-001 “HOLDER,SLIDER-POWERSWITCH” 1
BR1546 SHIELD PLATE 1
BR1547 SHIELD PLATE 1
TP1123 TAPE DRY-ADHESIVE 0.8333
BR1548 SHIELD PLATE 1
TP1118 Electrical Tape Therm-X 1 0.1667
332486-001 “BASE,CONTROL PANEL” 1
332499-001 SHIELD PLATE 1
SC1260 Screw CSKT+ 4
332500-001 SHIELD PLATE 1
332505-001 “HOLDER,SHIELD PLATE,LEFT” 1
332532-001 “HOLDER,SHIELD PLATE,RIGHT” 1
SC1268 “Screw, BND T+(3x12)” 2
SC1268 “Screw, BND T+(3x12)” 1
332507-001 SPACER 1
332506-001 “SLIDER,POWER SWITCH” 1
332484-001 “HOUSING, DISPLAY, PAINTED” 1
332484-XXX “HOUSING, PLASTIC, MOLDED” 1
LS1065 RESIN POLYSTYRENE BLACK 0.25
332491-001 PUSHBUTTON 1
332490-001 PUSHBUTTON 1
332495-001 “INDICATOR, TOP UNIT” 1
SC1293 SCREW BND T+ 4
XX1337 INSULATOR PVC 1
BR1539 STEEL SHIELD PLATE 1
332487-001 “PLATE, PVC” 1
SP1096 SPACER PLASTIC LOCKING 4
332483-001 “BASE, PLASTIC, PAINTED” 1
332483-XXX “BASE, PLASTIC, MOLDED” 1
LS1065 RESIN POLYSTYRENE BLACK 0.525
BR1496 Spring 1
332485-001 “PANEL, FESTIVAL-60" 1
332485-XXX ”ASY, DISPLAY COVER, FEST." 1
333256-001 “COVER, DISPLAY, CONTROL” 1
LS1068 RESIN DENKA ABS 0.033
333257-001 “COVER, CONTROL PANEL, TOP” 1
LS1065 RESIN POLYSTYRENE BLACK 0.0661
SC1288 “SCREW, 10mm x 3mm,” 1
SC1269 “Screw,BND T+” 6
XX1338 INSULATOR PVC 1
BR1540 STEEL SHIELD PLATE 1
332504-001 HOLDER 1
332492-001 PUSHBUTTON 1
332494-001 PUSH BUTTON 1
332496-001 “ORNAMENT, TOP UNIT” 1
332498-001 ORNAMENT 1
332489-001 ROTARY KNOB 1
SA1810 CLUSTER ASSY FUNCTION/ 1
CL1188 “CLUSTER, TOP UNIT, FEST.” 1
SA1087 FUNCTION PCB 1
CO1363 Connector 11P 2mm 2A 100V 1
CO1365 CONNECTOR 13P 2MM 2A100V 1
CO1374 Miniture Jack LR-SW 1
CO1377 RCA Pin Jack 2P 4
CP1697 “CAP, ELECT. 100uF, 16V” 2
CP1701 Electrolytic Cap. 47uF 16 4
IC1226 IC 1
IC1238 IC 1
RS2225 RES C/F MINI 100Kohm 5% 4
RS2239 RES C/F MINI 330 ohm 5% 4
CP1733 Pol. Prop. Flm Cap 220pF 2
RS2223 RES C/F MINI 1Kohm 5% 8
WI1702 JUMPER WIRE 24 AWG BARE 29
SA1089 VIDEO PCB 1
CO1376 RCA Pin Jack 1P 5
CP1697 “CAP, ELECT. 100uF, 16V” 2
CP1708 Electrolytic Cap. 22uF 50 3
IC1225 IC Prime-Time 1
RS2257 RES C/F MINI 75 ohm 5% 5
CP1750 Ceramic Cap. 68pF 50V 2
WI1702 JUMPER WIRE 24 AWG BARE 9
HA1213 HARNESS ASY 7-COND 200mm 1
HA1197 HARNESS ASSY 1
CC1064 “FERRITE CORE, TOROIDAL,” 1
IM1155 INSULATION SHRINK SLEEVE 0.06
SA1090 VOLUME CONTROL PCB 1
CP1717 “CAP, MTL.FILM, 0.1uF, 50V” 1
HA1130 CONNECTORIZES WIRE 1
RS2399 POTENTIOMETER W/GREEN LED 1
SA1091 IR SENSOR PCB 1
HA1068 “HARNESS, WIRE 3P” 1
IC1255 IR Sensor 1
CP1697 “CAP, ELECT. 100uF, 16V” 1
SA1093 POWER INDICATOR PCB 1
HA1115 “HARNESS, WIRE 4P” 1
LE1037 LED 3mm 5mcd 4
WI1702 JUMPER WIRE 24 AWG BARE 1
LB1265 Bar Code Traceability Lab 2
SA1086 “PRE-AMP PCB, FEST-60 US” 1
CP1811 Super Capacitor 1F 1
CO1369 Connector 5P 2mm 2A 100V 1
CO1370 Connectors 6P 2mm 2A 100V 1
CO1375 Jack 1P 2
CO1382 CONNECTOR 4P 2MM 2A 100V 1
CO1383 CONNECTOR HEADER 7-PIN 1
CO1389 CONNECTOR 14P 2mm 2A 100V 1
CP1700 Electrolytic Cap. 2200uF 3
CP1702 Electrolytic Cap. 470uF 1 2
CP1719 Metalized Flm Cap 0.039uF 6
CP1732 Pol. Prop. Flm Cap. 1500p 2
CP1733 Pol. Prop. Flm Cap 220pF 9
DI1192 “Zener Diode 0.4W (T/R,2"”)" 1
DI1204 Zener Diode 0.4W 2
FH1007 Fuse Holder 2
HA1112 CONNECTORIZES WIRE 13P 1
Festival 60 ASSEMBLY PARTS LIST

IC1226 IC 3
IC1232 IC Voltage Regulator +6VD 1
IC1234 IC Voltage Regulator -6VD 1
IC1236 IC 1
IC1245 IC ELECTRICAL VOLUME 1
IC1248 IC 1
IC1254 IC SMD OCTAL-D-TYPE LATCH 1
IC1259 IC SMD 32KBYTE CMOS STAT. 1
IC1262 IC 1
IC1265 IC LOW PWR CLOCK/CALENDAR 1
IC1269 IC 2
IC1270 IC SMD DUAL 2-to-4 LINE 1
IC1277 “IC, EEPROM, 256x8, CMOS” 1
IC1283 IC SMD DUAL 2-INPUT AND 1
RS2226 RES C/F MIN 1Mohm 5% 1/4W 3
RS2231 RES C/F MINI 18Kohm 5% 2
RS2233 RES C/F MINI 22 ohm 5% 3
RS2240 RES C/F MINI 3.3Kohm 5% 2
RS2247 RES C/F MINI 47 ohm 5% 2
RS2260 RES C/F MINI 8.2Kohm 5% 2
RS2261 RES C/F 1Kohm 5% 1/3W 1
SW1078 Push Switch 1P TV3 Prime- 1
TR1272 PNP XSTR 50V/100mA 300mW 1
TR1281 PNP XSTR 60V/3A 25W 1
TR1304 NPN XSTR 60V/3A 25W 1
XT1006 “XTAL, 32.768KHz” 1
XT1011 “XTAL, 15MHZ” 1
CP1706 Electrolytic Cap. 1uF 50V 3
IC1241 Photocoupler 1
RS2389 RES C/F 4.7Kohm 5% 1/3W 1
RS2238 RES C/F MINI 2.7Kohm 5% 8
RS2237 RES C/F MINI 270 ohm 5% 1
TR1290 PNP XSTR 50V/200mA 300mW 1
RS2290 RES C/F 180 ohm 5% 1/3W 2
RS2341 RES C/F 100 ohm 5% 1/3W 2
CO1402 CONNECTOR 34-POS 1
CO1367 Connector 4P 2mm 2A 100V 2
CO1388 CONNECTOR 10P 2mm 2A 100V 1
CO1363 Connector 11P 2mm 2A 100V 1
CP1697 “CAP, ELECT. 100uF, 16V” 3
CP1701 Electrolytic Cap. 47uF 16 18
CP1815 Cap Poly Film 15nF 5% 50V 2
CP1817 Cap Poly Film 68nF 5% 50V 2
CP1777 CAPACITOR CERAMIC 22pF 50 2
CP1725 Metallized Flm Cap. 0.22u 2
DI1201 Diode Rectifier 1 A 400V 10
IC1307 IC VOLTAGE REGULATOR +5V 1
RS2250 RES C/F MINI 47Kohm 5% 4
RS2315 RES FUSE 4.7 ohm 2% 1/4W 1
TR1268 NPN XSTR 50V/30mA 300mW 2
TR1283 NPN XSTR 20V/300mA 400mW 10
TR1291 NPN XSTR 50V/200mA 300mW 2
FS1089 FUSE SLO BLO 0.5A 250V 1
CP1863 ELECTROLYTIC CAP. 2
CP1707 Electrolytic Cap. 10uF 50 2
CP1722 Metallized Flm Cap. 0.01u 16
DI1196 Zener Diode 0.4W 3
RS2223 RES C/F MINI 1Kohm 5% 24
RS2224 RES C/F MIN 10Kohm 5% 13
TR1269 PNP XSTR 50V/30mA 300mW 3
CP1731 Pol. Prop. Flm Cap. 1000p 2
CP1711 Electrolytic Cap. 4.7uF 5 1
RS2222 RES C/F MINI 100 ohm 5% 1
FI1017 EMI FILTER 4-CIRCUIT 3
FI1014 FILTER EMI 6
FI1013 FILTER EMI 1
FI1018 “FILTER, EMI” 7
IC1219 IC Prime-Time 1
MI1206 TRANSFORMER TOP UNIT (US) 1
BR1542 STEEL SHIELD PLATE 1
HS1155 “HEATSINK, AMPLIFIER” 3
SC1262 “SCREW, BND + (M3x10)” 3
RS2225 RES C/F MINI 100Kohm 5% 20
RS2415 RES C/F 3.3Mohm 10% 1/2W 1
DI1205 Switching Diode 90V 0.3W 9
DI1206 Switching Diode 40V 0.3W 4
RS2212 SMD RES 4.7Kohm 5% 1/10W 2
IC1313 IC QUAD LOW-PWR LINE 1
CP1878 CAPACITOR 10pF 50V 1
FI1020 EMI FILTER 1
RS2431 RES C/F MINI 30Kohm 5% 2
RS2242 RES C/F MINI 330Kohm 5% 6
RS2432 RES C/F MINI 200Kohm 5% 2
FI1011 FILTER EMI 16
CO1411 CONNECTOR IC SOCKET DIP28 1
CO1359 Connector 2.5A250V 1
CO1374 Miniture Jack LR-SW 1
CL1192 “CLUSTER, PRE-AMP/HDPH” 1
CP1717 “CAP, MTL.FILM, 0.1uF, 50V” 2
CP1911 SMD CAP 0.1uF 10% 25V 16
RS2244 RES C/F MINI 3.9Kohm 5% 1
CP1843 “CAP.CERAM, 4700pF, 250V” 2
TR1341 NPN XSTR 30V/800mA 600mW 1
CP1887 SMD CAP 15pF 5% 50V 2
RS2211 SMD RES 470 ohm 5% 1/10W 2
SC1271 Screw Fpt+ 4
332501-001 “BRACKET, MTG,XFORMER” 1
SP1102 INSULATOR RUBBER 1
CC1065 FERRITE CHIP BEAD 26
HA1210 HARNESS ASY 5-COND 200mm 1
HA1120 CONNECTORIZES WIRE 1
CC1064 “FERRITE CORE, TOROIDAL,” 1
IM1155 INSULATION SHRINK SLEEVE 0.06
HA1166 HARNESS ASSY 1
HA1214 HARNESS ASY 11-COND 160mm 1
HA1166 HARNESS ASSY 1
CC1064 “FERRITE CORE, TOROIDAL,” 1
IM1155 INSULATION SHRINK SLEEVE 0.06
LB1265 Bar Code Traceability Lab 2
CP1891 CAPACITOR 680pF 10% 50V 2
RS2249 RES C/F MINI 4.7Kohm 5% 3
RS2235 RES C/F MINI 22Kohm 5% 6
RS2239 RES C/F MINI 330 ohm 5% 9
CP1757 CERAMIC CAP 0.01uF 50V 1
RS1711 SMD RES 220 ohm 5% 1/8W 1
IC1320 IC EPROM 128K x 8 DIP32 1
332488-001 “DISPLAY WINDOW, FEST’60" 1
332482-001 ”HOUSING, TOP UNIT" 1
LB1331 “LABEL ”"MASK"", FESTIVAL" 1
PM1399 “Foam Pad, Top Unit, Right” 1
PM1421 Top Unit Sleeve 1
PM1224 “Plastic Bag 14"”Lx20""Wx0.0" 1
PM1400 “Foam Pad, Top Unit, Left” 1
LB1317 LABEL JULIAN DATE CODE 1
LB1318 “LABEL BARCODE, FESTIVAL” 1
LB1314 LABEL FESTIVAL-60 TOP 1
PRELIMINARY RELEASE 19
Component Audio System Harman Kardon
Festival 60/80