manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Harman
  6. •
  7. Switch
  8. •
  9. Harman AMX DVX-3266-4K User manual

Harman AMX DVX-3266-4K User manual

QUICK START GUIDE
DVX-3266-4K 8x4 All-In-One Digital Video Presentation Switcher
Overview
This guide pertains to the Enova DVX-3266-4K all-in-one digital video presentation
switcher. The purpose of this guide is to illustrate how the device is to be installed
and set up in its simplest configuration by a trained technician.
What's in the Box?
The following items are included with the DVX-3266-4K:
• [1] DVX-3266-4K
• [1] AC Power Cord with US Pins
• [1] AC Power Cord with UK Pins
• [1] AC Power Cord with EU Pins
• [8] 3-Pin, 3.5mm Phoenix Male Connector
• [3] 4-Pin, 3.5mm Phoenix Male Connector
• [4] 5-Pin, 3.5mm Phoenix Male Connector
• [1] 3-Pin, 5.08mm Phoenix Male Connector
• [1] 4-Pin, 5.08mm Phoenix Male Connector
• [2] IR Emitter
• [2] Front Rack Mounting Brackets (Attached)
• [4] Rubber Foot (Attached)
• [1] This Quick Start Guide
Power
IEC Power Cord Connector: ~100-240V AC, 50/60Hz, 10A
Environmental Requirements
The environmental requirements for DVX-3266-4K are as follows:
• Operating Temperature: 32°F (0°C) to 104°F (40°C)
• Storage Temperature: -4°F (-20°C) to 158°F (70°C)
• Operating Humidity: 5% to 85% RH
Getting Connected
Ensure that the DVX is connected to an IP network using the LAN port. Once the
DVX is powered on, you can connect to it through its IP address.
NOTE: The DVX fully supports IPv6 network addressing. If the LAN port is connected
to an IPv6 capable network it will self select an appropriate IPv6 address based on
the discovered address parameters of the network to which it’s attached.
Locating the IP Address of the DVX
You can locate the IP address of the DVX by using the buttons on the front panel of
the unit. The IP address appears on the LCD display on the front panel of the DVX.
Perform these steps to locate the IP address of the unit:
• Press the STATUS button on the front panel of the unit to open the Status
Menu. The Status options appear on the LCD display.
• Use the UP and DOWN navigational arrow buttons to navigate through the
options until you find the IP address. Note the IP address for future reference.
NOTE: You can use the Status menu to verify current TCP/IP settings using the UP
and DOWN navigational buttons.
Switching to Static or Dynamic IP Addressing
To toggle between static or dynamic IP addressing, the controller cannot be
currently booting or it must be in ID Mode. If these conditions are met, holding the
ID pushbutton for 10 seconds to change the current IP addressing mode.
Changing the IP Address Once You Are Connected
Perform these steps to change the IP address once you are connected to the
controller:
NOTE: Ensure the PC you are using to connect to the controller has the latest
version of NetLinx Studio 4.0 installed on it.
1. In NetLinx Studio, select Diagnostics > Network Addresses from the menu bar
to open the Network Addresses dialog.
2. Click Get IP Information to enable the fields for editing.
3. Enter the System, Device (0 for NetLinx Masters), and Host Name information.
4. To specify a network IP address, select Specify IP Address.
5. Enter the IP parameters into the available fields.
6. Click Set IP Information to retain the pre-reserved IP Address to the Master.
7. Click Reboot Device to finish assigning the IP address to the Master, and click
OK to close the dialog.
Default Settings
The following sections list the default settings for the controller.
Default User Names and Passwords
The following table lists the default user names and passwords for accessing the
DVX through NetLinx Studio or the WebConsole
DEFAULT USER NAMES AND PASSWORDS
User Name Password
NetLinx Studio netlinx password
WebConsole administrator password
Default IP Addresses
The following table lists the default IP addresses for the DVX.
DEFAULT IP ADDRESS
IP Address Subnet
Static IP 192.168.1.3 255.255.255.0
ICSLAN 198.18.0.1 255.255.0.0
Link-local 169.254.x.y, where x and y are the least significant
two octets of the MAC address.
Configuration
All items in this section require accessing the front panel of the DVX.
Using the Front Panel Buttons
You can access the configuration settings for the DVX by using the VIDEO MENU,
AUDIO MENU, SWITCH, and STATUS buttons on the front panel of the DVX. Pressing
any button opens its respective menu on the LCD display on the front panel.
Press the TAKE pushbutton to implement an audio/video switch while you are in
the Switch menu on the LCD display. When in an audio or video menu, press the
button to cycle through audio and video inputs or outputs (depending on the
menu.)
Use the Navigational buttons to traverse the available options and change their
values.
FIG. 1 displays the navigational function of each button.
Move up to next menu configuration parameter
Move down to next menu configuration parameter
Decrease value, or
change the state
of the selected
parameter
Increase value, or
change the state
of the selected
parameter
FIG. 1 NAVIGATION BUTTONS
Selecting an Audio Test Tone
Selecting a test tone for your input source can help determine if you have your
audio devices connected correctly. Perform these steps to select a test tone:
1. Press the AUDIO MENU button on the front panel of the DVX to open the
Audio Output menu.
2. Press the left and right navigation buttons to select the output on which to
play the test tone (ALL, 1, 2, 3, or 4).
3. Press the down navigational button until the Test Tone option appears.
4. Use the left and right navigational buttons to select an appropriate audio test
tone.
Accessing the WebConsole
The DVX has a built-in WebConsole that allows you to change configuration
settings via a web browser on any device with access to the DVX.
The WebConsole consists of a series of web pages that are collectively called the
“Master Configuration Manager”. Refer to the NX Series NetLinx Integrated
Controllers WebConsole & Programming Guide for details on the WebConsole.
From any PC with access to the LAN that the target DVX resides on:
1. Open a web browser and type the IP Address of the target DVX in the Address
Bar.
2. Press Enter to access WebConsole for the DVX. The initial view is the
WebControl page.
Enabling Security
To enable security:
1. Select the Security tab on the WebConsole. The System Security Details
appear.
2. Click the Enabled check box to enable security and activate the Access
options.
3. Select the Access options which you want to require a login and password.
4. Configure users and groups as necessary.
Wired 802.1X Security
The DVX supports wired 802.1X, an IEEE Standard for Port-based Network Access
Control. To enable wired 802.1X, you must load an 802.1X certificate file to your
controller using NetLinx Studio. Once you add the certificate file to your workspace,
NetLinx Studio transfers the file to the appropriate directory on the controller.
1. Click to select (highlight) a System (in the Workspace tab of the Workspace
Bar).
2. Right-click on the Other folder to access the Other File Folder context menu,
and select Add Existing Other File.
3. In the Add Existing Other File dialog, locate and select the certificate file (.crt)
that you want to add to the selected System. Change the Files of Type option
to All Files (*.*) to look for other file types, if necessary.
4. Click Open to access the File Properties dialog, where you can view/edit
general file information for the selected file.
5. Click OK to add the file to the selected System. The file should now appear in
the Other folder under the selected System.
Hardware Information
This section lists important hardware information for the DVX.
Port Numbers
The following table lists the port numbers for the DVX-3266-4K model:
DVX 3266 PORT NUMBERS
RS-232 IR/Serial I/O Relay
Port 1/2 Port 11/12 Port 22 Port 21
Mounting the DVX into an Equipment Rack
The DVX occupies two rack units in a standard equipment rack. Install the included
rack mounting brackets using the supplied mounting screws prior to securing the
unit in the rack.
CAUTION: The DVX should not be installed in enclosed spaces. ALWAYS ensure that
the rack enclosure is adequately ventilated. Do not block any ventilation openings.
It is recommended that you leave 1 RU of space above the DVX when you install it in
a rack. DO NOT stand other units directly on top of the DVX when it is rack mounted,
as this will place excessive strain on the mounting brackets.
ALWAYS ensure that the rack enclosure is adequately ventilated. Do not block any
ventilation openings. Sufficient airflow must be achieved (by convection or forced-
air cooling) to satisfy the ventilation requirements of all the items of equipment
installed within the rack.
Additional Documentation
Additional documentation for this device is available at www.amx.com.
Last Revised: 25/02/2020
© 2020 Harman. All rights reserved. NetLinx, Enova, WebControl, AMX, AV FOR AN IT WORLD, and HARMAN, and their respective logos are
registered trademarks of HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of
their respective companies.
AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time.
The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153
AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom • +44 1904-343-100 • www.amx.com/eu/
5123557 REV: F

Other Harman Switch manuals

Harman AMX ENOVA DVX-3250HD-SP User manual

Harman

Harman AMX ENOVA DVX-3250HD-SP User manual

Harman AMX ENOVA DVX-2250HD-SP User manual

Harman

Harman AMX ENOVA DVX-2250HD-SP User manual

Harman AMX DVX-2265-4K User manual

Harman

Harman AMX DVX-2265-4K User manual

Harman AMX Solecis SDX-814-DX User manual

Harman

Harman AMX Solecis SDX-814-DX User manual

Harman AMX Precis PR Series Quick user guide

Harman

Harman AMX Precis PR Series Quick user guide

Harman AMX ENOVA DVX-3250HD-SP User manual

Harman

Harman AMX ENOVA DVX-3250HD-SP User manual

Harman AMX Enova AVX-400 User manual

Harman

Harman AMX Enova AVX-400 User manual

Harman AMX ENOVA DVX-3250HD-SP User manual

Harman

Harman AMX ENOVA DVX-3250HD-SP User manual

Harman AMX SOLECIS SDX-410-DX User manual

Harman

Harman AMX SOLECIS SDX-410-DX User manual

Harman AMX VPX-1701 User manual

Harman

Harman AMX VPX-1701 User manual

Harman AMX Enova DGX 100 Series User manual

Harman

Harman AMX Enova DGX 100 Series User manual

Harman AMX Solecis DX-814-DX User manual

Harman

Harman AMX Solecis DX-814-DX User manual

Harman HUB4000 Q User manual

Harman

Harman HUB4000 Q User manual

Popular Switch manuals by other brands

KICK ASS CONTROL HUB user manual

KICK ASS

KICK ASS CONTROL HUB user manual

CoolGear CG-7PU31HB product manual

CoolGear

CoolGear CG-7PU31HB product manual

Tripp Lite U460-003-3AG-C owner's manual

Tripp Lite

Tripp Lite U460-003-3AG-C owner's manual

C.P. Electronics ELTD1 Product guide

C.P. Electronics

C.P. Electronics ELTD1 Product guide

HYDACELECTRONIC EDS 4000 Series operating instructions

HYDACELECTRONIC

HYDACELECTRONIC EDS 4000 Series operating instructions

Black Box LE401A manual

Black Box

Black Box LE401A manual

Data Video SEB-1200 instruction manual

Data Video

Data Video SEB-1200 instruction manual

Black Box ServSwitch Secure SW2006A-USB-EAL manual

Black Box

Black Box ServSwitch Secure SW2006A-USB-EAL manual

Murrelektronik TREE M-4TX English Manual

Murrelektronik

Murrelektronik TREE M-4TX English Manual

Black Box IC650A user manual

Black Box

Black Box IC650A user manual

Planet IGS-6325-16P4S Quick installation guide

Planet

Planet IGS-6325-16P4S Quick installation guide

Planet IGS-4215 Series Quick installation guide

Planet

Planet IGS-4215 Series Quick installation guide

Qlogic SANbox 3810 quick start guide

Qlogic

Qlogic SANbox 3810 quick start guide

Tripp Lite 0SU22081 Brochure & specs

Tripp Lite

Tripp Lite 0SU22081 Brochure & specs

Black Box LB9002A-SC-R3 Brochure & specs

Black Box

Black Box LB9002A-SC-R3 Brochure & specs

Tripp Lite B004-2DUA2-K owner's manual

Tripp Lite

Tripp Lite B004-2DUA2-K owner's manual

Black Box LB9801A manual

Black Box

Black Box LB9801A manual

Black Box LB9020A Installation

Black Box

Black Box LB9020A Installation

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.