Harrod NBL-103 User manual

1 person only required for this assembly
Estimated 15 minutes assembly time
INS113
Revision 1
26/09/2016
NBL-103 / NBL-113
Telescopic Netball Posts
15
mins
ASSEMBLY INSTRUCTIONS
HINT: Before assembling your posts, attach the nets to the rings.
Please refer to INS592 supplied

Pack Contents
Code
Product
NBL-103 / NBL-113
Telescopic Netball
Telescopic Netball
1. Base
2. Upright
3. Ring
1.
x1
FEP086 / FEP071 (Pair / Single)
2.
x1
NBL-111 / NBL-121 (Pair / Single)
*parts are not to scale
Page 1
Tools Required
13mm
2x 13mm Spanner
3.
x1
NBL-047 / FEQ632 (Pair / Single)

Assembly Instructions
Code
Product
NBL-103 / NBL-113
Telescopic Netball
Page 2
13mm 1Remove the pre-fitted Nutcaps (A), M8 Bolt (B), M8 Nyloc (C) and M8 Washers (D) from the Base (1).
2Insert the larger diameter tube of the Upright (2) into the Base and secure in place using the fittings
removed in the previous stage.
1
2
13mm
1
C
B
D
A

Code
Product
NBL-103 / NBL-113
Telescopic Netball
Page 3
3Slide the Ring (3) over the smaller diameter tube of the upright and secure using the M10 Hex Bolt
(E), M10 Spring Washer (F) and M10 Wingnut (G) supplied with the Ring.
G
F
E
3
2
Height Adjustment
1Depress the spring button clip in the upright and lift the top half of the upright. Locate the button
clip in the hole corresponding to the desired height. Ensure the button clip “pops” into place and is
secure before using your netball posts.
1
2
CLICK!
CLICK!
3
3.05m
2.75m
2.44m
1.88m