Hasbro Peek 'N Play Discovery Dome 08977 User manual






�



Thank you for choosing this
unique PLAYSKOOL product!
Includes fabric dome with rods, left fence panel/door, right fence panel, threshold, left front
support, right front support, left rear base, right rear base, 3 balls, spider teether, phone, monkey
rattle, fish rattle, mailbox shape sorter (2 pieces) with 3 fit-in shapes, 2 links, triangle, circle,
square, 1 2 washer head screws, LET’S PLAY TOGETHER tip card and playmat.
OVER 3 months
08977
Peek ‘N Play Discovery Dome™
�











Adult assembly required.
Tool needed: Phillips/
crosshead screwdriver
(not included).
CAUTION: This product contains small parts which are necessary for assembly. Prior to and during
assembly of this product, keep small parts out of children’s reach. Small parts pose a choking hazard to
children under 3 years.
WARNING: Continuous adult supervision required. To avoid injury and to prevent possible strangulation
and entanglement injury:
NEVER place dome in crib or playpen. ALWAYS play with dome on the floor. NEVER add
strings or ties to the dome.

STEP 1: Slide the threshold into the left fence panel/
door as shown. Attach the right fence panel to the
other side of the threshold as shown.
NOTE: You will hear a “snap” when these
pieces are properly connected.
STEP 2: Place the left front support under the left
fence panel/door. Gently press fit left fence panel/
door down onto left front support as shown. Repeat
step for right front support and right fence panel.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
A
B C
D E
F
H
I J
K
L
M R
N O P Q
ASSEMBLY:
NOTE: You will need a Phillips/cross head screwdriver (not included) for proper assembly.
PARTS:
G
threshold
left fence panel/door
right fence panel
left front support
right front support
right rear base
left rear base
fabric dome with rods
3 balls
circle
square
triangle
2 links
phone
fish rattle
spider teether
monkey rattle
mailbox shape sorter (2
pieces) with 3 fit-in shapes
12 washer head screws
S
STEP 3: Turn the unit over and
secure the left and right front
supports and threshold by inserting
washer head screws in each screw
point as shown. Turn unit right-side
up once screws are inserted.
STEP 4: Lie the fabric dome out flat as shown. Lift
the top of the fabric dome up and connect all 4 built-in
support rods by inserting the top rod into the bottom
rod as shown.
NOTE: Rods are made to flex for increased
ease of assembly. You may need to slide the
fabric up on the rods to assemble posts.
top rod
bottom rod

STEP 6a: Connect the right rear base to the left rear base.
STEP 8: Insert the tab on the front of the fabric
dome into the slot on the back of the fence
panels as shown.
STEP 9: Attach tube bottom to slot on left front
support. Secure tube to fabric with tabs as shown.
STEP 10: Attach the shape sorter lid to the shape
sorter mailbox as shown.
slot
tab



�







�




�
�
STEP 5a: Insert the fabric dome’s 2 front rods into
the 2 rod holders located on the left and right front
supports.
NOTE:
Left front rod is marked: LF
Right front rod is marked: RF

 

STEP 7a: Insert the fabric dome’s 2 back rods into
the 2 rod holders located on the rear base.
NOTE:
Left back rod is marked: LR
Right back rod is marked: RR

 

STEP 5b: Turn the unit on its side and secure the 2
front rods to the 2 rod holders by inserting washer
head screws in each screw point.
STEP 6b: Turn the newly connected rear base over
and secure it by inserting washer head screws in the
screw points .
STEP 7b: Lift the rear panel and secure the 2 back rods to
the 2 rod holders by inserting washer head screws in each
screw point.
PLAY FEATURES:
Place the playmat on the floor.
NOTE:
Place the dome on the playmat
so that the dome covers the
corners of the playmat.
Your child will love to explore the
activities on the playmat, which include:
• Peek-a-boo crinkly leaf
• Fun-to-touch satin flower
• Pull ribbon “hair” on the monkey
Please see your LET’S PLAY
TOGETHER tip card (included) for
all kinds of great play activities
and ideas!

DECORATIONS, STORAGE AND PORTABILITY:
1. Hanging toys can be attached to loops on the sides or
at the top as shown. You can also attach other Let’s Play
Together™ products (sold separately) to loops.
2. Spider teether, rattles and the shape sorter mailbox can be
placed in either of the 2 front slots or the inside slot as shown.
3. This Playskool product easily folds together for storage
and portability. Simply fold the front and back together
and connect them using the straps as shown. Use the
convenient carry handle for on-the-go play.
4. Put-and-take pocket doubles as a storage pouch for balls.
Use a Phillips/crosshead
screwdriver to loosen screw in
battery compartment door (screw
remains attached to door). Insert
2 x 1.5V “AA” or R6 size batteries.
Alkaline batteries recommended.
Replace door and tighten screw.
TO INSTALL BATTERIES:
CAUTION: TO AVOID BATTERY LEAKAGE
1. Be sure to insert the batteries correctly and always follow the toy and battery
manufacturers’ instructions;
2. Do
not mix old and new batteries or alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium) batteries;
3. Always remove weak or dead batteries from the product.
IMPORTANT: BATTERY INFORMATION
Please retain this information for future reference. Batteries should be replaced by an adult.
CAUTION:
1. Always follow the instructions carefully. Use only batteries specified and be sure to insert item correctly by matching
the + and – polarity markings.
2. Do not mix old batteries and new batteries or standard (carbon-zinc) with alkaline batteries.
3. Remove exhausted or dead batteries from the product.
4. Remove batteries if product is not to be played with for a long time.
5. Do not short circuit the supply terminals.
6. Should this product cause, or be affected by, local electrical interference, move it away from other electrical equipment.
Reset (switching off and back on again or removing and re-inserting batteries) if necessary.
7. RECHARGEABLE BATTERIES: Do not mix these with any other types of battery. Always remove from the product before
recharging. Recharge batteries under adult supervision. DO NOT RECHARGE OTHER TYPES OF BATTERIES.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy, and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
© 2006 Hasbro. All Rights Reserved.
TM & ® denote U.S. Trademarks
08977 P/N 6575080000

