Hasselblad Lusso User manual

Operations Manual
Lusso

GB
2
Owner’s Record
e model and serial numbers are located on the bottom. Record the serial number in the
space provided below. Refer to these numbers whenever you call your Hasselblad dealer
regarding this product.
Model No. Lusso
Serial No.
WARNING
To reduce re or shock hazard, do not expose the unit to rain or moisture.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
DANGER
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY
FOLLOW THESE INSTRUCTIONS
If the shape of the plug does not t the power outlet, use an attachment plug adaptor of
the proper conguration for the power outlet.

GB
3
CAUTION
AC Adapter
Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC
Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while
using the apparatus. e power cord (mains lead), if supplied, is designed specically for use
with this camera only, and should not be used with other electrical equipment.
Battery pack
If the battery pack is mishandled, the battery pack can burst, cause a re or even chemical
burns. Observe the following cautions.
• Do not disassemble.
• Do not crush and do not expose the battery pack to any shock or force such as
hammering, dropping or stepping on it.
• Do not short circuit and do not allow metal objects to come into contact with the
battery terminals.
• Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a
car parked in the sun.
• Do not incinerate or dispose of in re.
• Do not handle damaged or leaking lithium ion batteries.
• Be sure to charge the battery pack using a genuine Hasselblad battery charger or a
device that can charge the battery pack.
• Keep the battery pack out of the reach of small children.
• Keep the battery pack dry.
• Replace only with the same or equivalent type recommended by Hasselblad.
• Dispose of used battery packs promptly as described in the instructions.

GB
4
For Customers in Europe
Notice for the customers in the countries applying EU Directives
Manufacturer: Victor Hasselblad AB, Utvecklingsgatan 2, 41756 Göteborg, Sweden.
Hereby, Victor Hasselblad AB, declares that this Interchangeable Lens
Digital Camera is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
Notice
If static electricity or electromagnetism causes data transfer to discontinue midway (fail),
restart the application or disconnect and connect the communication cable (USB, etc.)
again.
is product has been tested and found compliant with the limits set out in the EMC
regulation for using connection cables shorter than 3 meters (9.8 feet).
e electromagnetic elds at the specic frequencies may inuence the picture and sound
of this unit.

GB
5
Disposal of Old Electrical & Electronic Equipment (Applicable in the European
Union and other European countries with separate collection systems)
Disposal of waste batteries (applicable in the European Union and other
European countries with separate collection systems)
is symbol on the product or on its packaging indicates that this product
shall not be treated as household waste. Instead it shall be handed over to
the applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of
this product. e recycling of materials will help to conserve natural
is symbol on the battery or on the packaging indicates that the battery
provided with this product shall not be treated as household waste.
On certain batteries this symbol might be used in combination with a
chemical symbol. e chemical symbols for mercury (Hg) or lead (Pb) are
added if the battery contains more than 0.0005% mercury or 0.004% lead.
By ensuring these batteries are disposed of correctly, you will help prevent
potentially negative consequences for the environment and human health which could
otherwise be caused by inappropriate waste handling of the battery. e recycling of the
materials will help to conserve natural resources.
In case of products that for safety, performance or data integrity reasons require a
permanent connection with an incorporated battery, this battery should be replaced by
qualied service sta only. To ensure that the battery will be treated properly, hand over
the product at end-of- life to the applicable collection point for the recycling of electrical
and electronic equipment.
For all other batteries, please view the section on how to remove the battery from the
product safely.
Hand the battery over to the applicable collection point for the recycling of waste batteries.
For more detailed information about recycling of this product or battery, please contact
your local Civic Oce, your household waste disposal service or the shop where you
purchased the product.
resources. For more detailed information about recycling of this product, please contact
your local Civic Oce, your household waste disposal service or the shop where you
purchased the product.

GB
6
Table of contents
Introduction of functions............................................................................8
Before use
Notes on using your camera .......................................................................10
Checking the supplied items.......................................................................13
Identifying parts...........................................................................................14
Front side.................................................................................................14
Rear side...................................................................................................15
Top side/Side view..................................................................................16
Bottom view ............................................................................................18
Lens FF 28-70 mm F3.5-5.6 OSS..........................................................19
List of icons on the screen...........................................................................20
Functions list
Functions that can be operated using the buttons/dials .........................24
How to use the Quick Navi screen.............................................................24
Operating the camera..................................................................................26
How to use the control wheel ...............................................................26
How to use the front dial/rear dial.......................................................26
Selecting a function using the Fn (Function) button ..............................27
Functions that can be set using the Fn (Function) button................28
Functions that can be selected using the MENU button........................29
Using the In-Camera Guide........................................................................37
Preparing the camera
Charging the battery pack...........................................................................38
Charging time (Full charge)..................................................................40
Charging by connecting to a computer ...............................................40
Checking the remaining battery charge ..............................................41
To remove the battery pack...................................................................41
Inserting a memory card.............................................................................42
Memory cards that can be used............................................................43
Attaching a lens ............................................................................................44
Setting the date and time.............................................................................46
Setting the date/time and area again....................................................47
Shooting a clear movie without camera shake .........................................48
Camera shake warning indicator..........................................................48
Using the SteadyShot function .............................................................48
Holding the camera properly................................................................49
Removing the Eyepiece cup........................................................................49

GB
7
Shooting and viewing images
Shooting still images....................................................................................50
Recording movies.........................................................................................51
Playing back images.....................................................................................53
Switching between still images and movies ........................................53
Deleting images............................................................................................53
Selecting a shooting mode
Selecting a shooting mode ..........................................................................54
Functions available for each shooting mode ............................................55
Various functions
Using the various functions........................................................................56
Audio settings for movie recording .....................................................56
Creative Style...........................................................................................57
DRO/Auto HDR.....................................................................................58
Playback functions .................................................................................58
Using Wi-Fi functions
Using the Wi-Fi and NFC one-touch functions.......................................59
Viewing images on a computer
Using the soware........................................................................................60
Recommended computer environment (Windows)..........................60
Recommended computer environment (Mac)...................................60
Using “Image Data Converter”.............................................................61
Using “Remote Camera Control” ........................................................61
Using “PlayMemories Home” ...............................................................62
Others
Checking the number of images and recordable time of movies ..........63
Specications ................................................................................................67

GB
8
Introduction of functions
is section introduces some frequently used shooting functions and other unique
functions.
Exposure Compensation
You can adjust the exposure to change the brightness of the entire image. Even when the
shooting mode is set to M, you can adjust the exposure if the ISO sensitivity is set to [ISO
AUTO].
ISO/Multi Frame NR
You can adjust the luminous sensitivity.
e ISO sensitivity can be adjusted between ISO 50 and ISO 25600. When you select
(Multi Frame NR), you can select larger ISO numbers than the maximum ISO sensitivity.
White Balance
You can adjust the colour tones.
You can select an option to suit a light source, or perform ne adjustments using color
temperature and color lters.
Drive mode
You can select an appropriate drive mode to suit your purposes, such as single shooting,
continuous shooting, or bracket shooting.
DRO/Auto HDR
[D-Range Opt.]: By dividing the image into small areas, the camera analyses the contrast
of light and shadow between the subject and the background, and produces an image with
the optimal brightness and gradation.
[Auto HDR]: Shoots 3 images with dierent exposures, and then overlays these images to
create an image with rich gradation.
Creative Style
You can select the desired style from among 13 styles.
You can also adjust certain image factors, such as exposure, using the selected style as the
base.
Movie recording with manual adjustments
You can adjust the exposure in P, A, S, or M mode even when shooting movies.
Introduction of functions
Shooting functions used frequently
Features of this camera

GB
9
Display information
When you look into the viewnder, viewnder mode is activated, and when you move
your face away from the viewnder, the viewing mode reverts to LCD screen mode
(default settings). You can change the screen display mode by pressing DISP on the
control wheel.
Quick Navi
In [For viewnder] screen, you can quickly switch from the LCD screen to the Quick Navi
screen by pressing the Fn button. You can set the items with an intuitive operation.
Customisation
e camera are equipped with the Custom buttons, where you can assign desired function
on each button.You can also assign functions to other buttons, such as the AEL button.
How to operate or customise the camera
Introduction of functions

GB
10
Notes on using your camera
Screen language • You can select the language displayed on the screen using the menu
Shooting procedure
is camera has 2 modes for monitoring subjects: the LCD screen mode using the LCD
screen, and the viewnder mode using the viewnder.
Functions built into this camera
• is manual describes 1080 60i compatible devices and 1080 50i compatible devices.
To check whether your camera is a 1080 60i compatible device or 1080 50i compatible
device, check for the following marks on the bottom of the camera.
1080 60i compatible device: 60i
1080 50i compatible device: 50i
• is camera is compatible with 1080 60p or 50p-format movies. Unlike standard
recording modes up to now, which record in an interlacing method, this camera records
using a progressive method. is increases the resolution, and provides a smoother,
more realistic image.
Creating an image database le
If you insert a memory card that does not contain an image database le into the camera
and turn on the power, the camera automatically creates an image database le using some
of the memory card’s capacity.
e process may take a long time and you cannot operate the camera until the process
is completed. If a database le error occurs, export all images to your computer using
“PlayMemories Home,” and then format the memory card using the camera.
Shooting with an E-mount lens compatible APS-C size
is camera is equipped with a 35 mm, full-frame CMOS sensor. However, the image size
is automatically set to that of the APS-C size setting and the image size is smaller when an
E-mount lens compatible APS-C size is used (default settings).
No compensation for damaged content or recording failure
Hasselblad cannot compensate for failure to record or loss or damage of recorded content
due to a malfunction of the camera or recording media, etc.
Back up recommendation
To avoid the data loss, always copy (back up) data to other media.
Notes on using your camera

GB
11
Notes on the LCD screen, electronic viewnder, lens, and image sensor
• e LCD screen and electronic viewnder are manufactured using extremely high-
precision technology so over 99.99% of the pixels are operational for eective use.
However, there may be some tiny black points and/or bright points (white, red, blue
or green in color) that constantly appear on the LCD screen and electronic viewnder.
ese points are normal in the manufacturing process and do not aect the images in
any way.
• Do not hold the camera by the LCD screen.
• When using the power zoom lens, be careful not to draw your ngers or any other
objects caught in the lens.
• Do not expose the camera to sunlight or shoot sunward for a long time. e internal
mechanism may be damaged. If sunlight is focused on a nearby object, it may cause a
re.
• Images may trail across on the screen in a cold location. is is not a malfunction.
When turning on the camera in a cold location, the screen may become temporarily
dark. When the camera warms up, the screen will function normally.
• e recorded image may be dierent from the image you monitored before recording.
Notes on recording for long periods of time
• Depending on the camera and battery temperature, you may be unable to record movies
or the power may turn o automatically to protect the camera. A message will be
displayed on the screen before the power turns o or you can no longer record movies.
In this case, leave the power o and wait until the camera and battery temperature goes
down. If you turn on the power without letting the camera and battery cool enough, the
power may turn o again or you may be unable to record movies.
• Under high ambient temperatures, the temperature of the camera rises quickly.
• When the temperature of the camera rises, the image quality may deteriorate. It
is recommended that you wait until the temperature of the camera drops before
continuing to shoot.
• e surface of the camera may get warm. is is not a malfunction.
Notes on importing AVCHD movies to a computer
When importing AVCHD movies to a computer, install the soware “PlayMemories
Home” from the supplied download link on the USB stick.
Notes when playing movies on other devices
is camera uses MPEG-4 AVC/H.264 High Prole for AVCHD format recording. Movies
recorded in AVCHD format with this camera cannot be played with the following devices.
– Other devices compatible with AVCHD format that do not support High Prole
– Devices incompatible with the AVCHD format
is camera also uses MPEG-4 AVC/ H.264 Main Prole for MP4 format recording. For
this reason, movies recorded in MP4 format with this camera cannot be played on devices
other than those that support MPEG-4 A VC/H.264.
Notes on using your camera

GB
12
• Discs recorded with HD(high denition) image quality can be played back only on
AVCHD format-compatible devices. DVD-based players or recorders cannot play back
HD image quality discs, as they are incompatible with the AVCHD format. Also, DVD-
based players or recorders may fail to eject HD image quality discs.
• Movies recorded in 1080 60p/1080 50p format can be played back only on 1080
60p/1080 50p-supported devices.
Warning on copyright
Television programs, lms, videotapes, and other materials may be copyrighted.
Unauthorised recording of such materials may be contrary to the provisions of the
copyright laws.
The pictures used in this manual
e photographs used as examples of pictures in this manual are reproduced images, and
are not actual images shot using this camera.
On the data specications described in this manual
e data on performance and specications are dened under the following conditions,
except as described in this manual: at an ordinary ambient temperature of 25ºC (77°F),
and using a battery pack that has been fully charged until the charge lamp has turned o.
Notes on shooting with the viewnder
is camera is equipped with an Organic Electro-Luminescence viewnder with high
resolution and high contrast. is viewnder achieves a wide viewing angle and a long eye
relief. is camera is designed to provide an easily viewable viewnder by appropriately
balancing various elements.
• e image may be slightly distorted near the corners of the viewnder. is is not a
malfunction. When you want to check every detail of the entire composition, you can
also use the LCD screen.
How to turn o wireless network functions (Wi-Fi and NFC, etc.) temporarily
When you board an airplane, etc., you can turn o all wireless network functions
temporarily.
Select MENU[Wireless] [Airplane Mode][On]
If you set [Airplane Mode] to [On], an (airplane) mark will be displayed on the screen.
Notes on wireless LAN
If your camera is lost or stolen, Hasselblad bears no responsibility for the loss or damage
caused by illegal access or use of the registered access point on the camera.
Notes on using your camera

GB
13
Checking the supplied items
e number in parentheses indicates the number of pieces.
• Camera (1)
• AC Adapter AC-UB10C/UB10D (1)
• Power cord (mains lead) (1)
* Multiple power cords may be supplied
with your camera. Use the appropriate
one that matches your country/region.
• Rechargeable battery pack NP- FW50 (1)
• Micro USB cable (1)
• Shoulder strap
For how to attach the shoulder strap to the
camera, refer to the enclosed booklet.
• Body cap (1)
• Shoe cap (1)
• Eyepiece Cup (1) (Attached to the
camera)
• Getting Started Guide (1)
• USB Stick
• FF 28-70mm ƒ/3.5-5.6 OSS lens (1)
Checking the supplied items

GB
14
Identifying parts
Front side
AF illuminator/Self-timer lamp
Front dial
Remote sensor
Lens release button
Built-in microphone*1
Mount index
Image sensor *2
Mount
Contacts *2
*1 Do not cover this part during movie recording.
Doing so may cause noise or lower the volume.
*2 Do not directly touch these parts.
When the lens is removed
Identifying parts

GB
15
Rear side
Dioptre-adjustment dial
• Adjust the diopter-adjustment dial to
your eyesight until the display appears
clearly in the viewnder.
Eyepiece cup
Viewnder
MENU button
Eyepiece sensors
LCD screen
• You can adjust the LCD screen
to an easily viewable angle and shoot
from any position.
Identifying parts
For shooting: C2 (Custom2) button
For viewing: (Enlarge) button
AF/MF/AEL switch lever
Rear dial
For shooting: AF/MF
(Auto focus/manual focus)
button/ AEL button
For viewing: (Image index) button
MOVIE button
For shooting: Fn button
For viewing: (Send to Smartphone)
button
Control wheel
For shooting: C3 (Custom3) button
For viewing: (Delete button)
Access lamp
(Playback) button

GB
16
Identifying parts
Top side/Side view
Speaker
Image sensor position mark
Microphone jack
• When an external microphone is
connected, the microphone is turned on
automatically. If the external microphone
is a plug- in-power type, the power of the
microphone is supplied by the camera.
Headphones jack
Charge lamp
Multi terminal
• Supports Micro USB compatible device.
HDMI micro jack * For details on compatible accessories of
the Multi interface shoe, consult your
Hasselblad dealer or local authorised
Hasselblad service facility. Accessories
for the Accessory Shoe can also be used.
Operations with other manufacturers’
accessories are not guaranteed.
Multi interface shoe*
• Some of the accessories may not be
inserted fully and protrude backward
from the Multi interface shoe. However,
when the accessory reaches the front
end of the shoe, the connection is
completed.
Mode dial
Power switch/Shutter button
C1 (Custom 1) button
Exposure compensation dial

GB
17
Identifying parts
Hooks for shoulder strap
• Attach both ends of the strap onto the camera.
(N Mark)
• is mark indicates the touch point for connecting the camera and an NFC-enabled
Smartphone. For details on the location of the N mark on your Smartphone, refer to the
operating instructions of the Smartphone.
Memory card cover
Memory card slot
• NFC (Near Field Communication) is an international standard of short- range wireless
communication technology.

GB
18
Identifying parts
Battery insertion slot
Battery cover
Tripod socket hole
• Use a tripod with a screw less
than 5.5 mm (7/32 inches) long.
Otherwise, you cannot rmly secure
the camera, and damage to the
camera may occur.
Connection plate cover
Use this when using an AC-PW20
AC Adaptor (sold separately). Insert
the connection plate into the battery
compartment, and then pass the cord
through the connection plate cover as shown
below.
• Make sure that the cord is not pinched
when you close the cover.

GB
19
Lens FF 28-70mm ƒ/3.5-5.6 OSS
Focusing ring
Zoom ring
Focal-length scale
Focal-length index
Lens contacts*
Mount index
* Do not touch this part directly.
Identifying parts

GB
20
List of icons on the screen
e status of the LCD screen is set to [Display All Info.] in the default settings.
When you change [DISP Button] setting, and then if you press DISP on the control wheel,
the screen status will change to “For viewnder” mode. You can also display the histogram
by pressing DISP.
For the LCD screen mode
For the viewnder mode
In Auto Mode or Scene Selection mode P/A/S/M/Sweep Panorama mode
For playback (Basic
information display)
List of icons on the screen