Hathaway XT TR1005 Maintenance manual

V2:020823
Questions, problems, missing parts?
Before returning to your retailer, call our Consumer Hotline at 1-800-759-0977,
Monday – Friday, 8 a.m. – 5 p.m. (CST).
TR1005 / TR1010
HATHAWAY XT
12-FT AND 14-FT ROUND TRAMPOLINE - BLUE
Assembly, Installation, Care, Maintenance, and Use Instructions
Trampolines and safety enclosures are
susceptible to winds. Be sure to secure
trampoline and enclosure. Wind damage is
not covered by trampoline warranty.
CAUTION
Read these materials prior to assembling and using
this trampoline. Save this manual for future reference.
WARNING
WARNING
DO NOT attempt or allow somersaults. Landing on the head
or neck can cause serious injury, paralysis, or death, even
when landing in the middle of the bed (jumping mat).
DO NOT allow more than one person on the
trampoline. Use by more than one person at the
same time increases the chance of injury.
Use trampoline only with mature, knowledgeable supervision. Enforce all safety
rules. All trampoline users require supervision regardless of their age and experience.
Maximum user weight for the trampoline should not exceed 330-lbs (150-kg).
Overloading trampoline above recommended user weight limit may cause damage
to jumping mat or springs that is not covered by trampoline warranty.
Trampolines not for children under 6 years.

2
TABLE OF CONTENTS
THANK YOU! ................................................................... 3
SAFETY INFORMATION SIGNAL WORDS ............................. 3
INTRODUCTION ............................................................... 3
INSTALLATION AND ASSEMBLY ......................................... 4
TRAMPOLINE PLACEMENT .................................................... 4
LOCATION .................................................................... 4
RELOCATION ................................................................. 4
TRAMPOLINE PARTS LIST ..................................................... 5
TRAMPOLINE ASSEMBLY ...................................................... 6
SAFETY ENCLOSURE PARTS LIST ............................................. 9
SAFETY ENCLOSURE ASSEMBLY .............................................. 10
TRAMPOLINE LADDER PLACEMENT .......................................... 12
WARNING LABEL PLACEMENT ............................................... 13
TRAMPOLINE AND SAFETY ENCLOSURE DISASSEMBLY ....... 14
TESTING THE TRAMPOLINE .............................................. 14
TRAMPOLINE SAFETY CHECKS ............................................... 14
ENCLOSURE NET SAFETY CHECKS ........................................... 14
PRODUCT USE ................................................................. 15
DANGER FOR YOUNG CHILDREN ............................................ 15
SAFE USE INSTRUCTIONS ..................................................... 15
FUNDAMENTAL BOUNCE TECHNIQUES ..................................... 18
CARE AND MAINTENANCE ............................................... 19
GENERAL CARE ................................................................ 19
PRODUCT DAMAGE ........................................................... 19
PRODUCT WARRANTY ...................................................... 20

3
This User Manual includes assembly and installation instructions, use instructions, and care and
maintenance information. Proper techniques in fundamental jumping and bouncing are also discussed.
WARNING
WARNING
WARNING
THANK YOU!
SAFETY INFORMATION SIGNAL WORDS
INTRODUCTION
Thank you for purchasing this product! We work around the clock and around the globe to ensure
that our products maintain the highest possible quality. However, in the rare case of issues during
assembly or use of this product, please contact our Consumer Hotline at 1-800-759-0977 for immediate
assistance before contacting your retailer. Please read the warranty information at the back of this
User Manual for further details.
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serous injury.
CAUTION indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to
physical injury.
SAFETY INSTRUCTIONS indicate specic safety-related
instructions or procedures.
Misuse of this trampoline can be dangerous and can cause serious injury!
To reduce the risk of injury, be sure to follow the safety rules in this manual.
NOTICE
SAFETY
INSTRUCTIONS
CAUTION
Read these materials prior to assembling and using this trampoline.
Save this manual for future reference.

4
INSTALLATION AND ASSEMBLY
TRAMPOLINE PLACEMENT
LOCATION
• Adequate overhead clearance is essential. A minimum of 24 feet from ground level is recommended.
Provide clearance for wires, tree limbs, and other possible hazards.
• Lateral clearance is essential. Place the trampoline and trampoline enclosure away from walls,
structures, fences, and other play areas. Maintain a clear space on all sides of the trampoline and
trampoline enclosure.
• Place the trampoline and trampoline enclosure on a level surface (preferably grass) before use. Locating
the trampoline and trampoline enclosure on a hard surface will add stress to the frame, which over time
can cause damage that is not covered by the warranty. Placing the trampoline and trampoline enclosure
on an uneven surface may result in the trampoline and trampoline enclosure tipping over.
• Never place the trampoline and trampoline enclosure near water and keep sufcient space around them.
• Use the trampoline and trampoline enclosure in a well-lit area. Articial illumination may be required
for indoor or shady areas.
• Remove any obstructions from beneath the trampoline and trampoline enclosure.
• For additional stability, place sandbags on the U-shaped trampoline leg bases. This will prevent the
trampoline and trampoline enclosure from tipping over in the event of any sideways force.
RELOCATION
• Strong winds can blow the trampoline and trampoline enclosure over. If strong winds are predicted, the
trampoline and trampoline enclosure should be moved to a protected place, disassembled, or fastened to
the ground with at least three anchors and tie-downs.
• If possible, avoid moving the assembled trampoline and trampoline enclosure because they
could bend during transportation. If you must move the trampoline and trampoline enclosure
a short distance:
- Position at least four adults spaced evenly around the frame.
- Keep the trampoline and trampoline enclosure level as you lift and carry them. Avoid tilting or
dragging the trampoline and trampoline enclosure, which could cause them to bend or warp.
• To transport the trampoline and trampoline enclosure over long distances, disassemble them and return
them to their original packaging.

5
12-FT TRAMPOLINE:
4 Legs 14-FT TRAMPOLINE:
6 Legs
INSTALLATION AND ASSEMBLY
ITEM IMAGE PART
DESCRIPTION
TR1005
PART
NUMBER
TR1005
12-FT 4 LEGS
PART QTY
TR1010
PART
NUMBER
TR1010
14-FT 6 LEGS
PART QTY
ATop Rail TRP1100 8 TRP1108 12
BSafety Pad TRP1101 1 TRP1109 1
CJumping Mat TRP1102 1 TRP1110 1
DSpring TRP1103 72 TRP1103 84
ELeg Extension TRP1104 8 TRP1122 12
FLeg Base TRP1105 4 TRP1111 6
GScrew
TRP1106
16
TRP1106
24
HWasher 16 24
ISpring
Fixing Tool TRP1107 1 TRP1107 1
JAccess Ladder TRP1120 1 TRP1120 1
TRAMPOLINE PARTS LIST

6
STEP 1: FRAME LAYOUT
Lay out the trampoline parts on the ground so
that the top rail sections start to form a circle.
When laying out the top rail sections, make
sure that each section is arranged so that it will
properly connect with adjacent sections.
STEP 2: LEGS ASSEMBLY
Assemble each leg base to the leg extensions,
ensuring that the screw holes align. Attach the
leg extensions to the leg base with the screws
and washers provided and secure tightly. Repeat
this step for all leg bases.
F
E E
E
F
HG
STEP 3: TOP RAIL TUBES ASSEMBLY
Connect top rail tubes together, one by one,
until they form a large circle. Joining the last
top rail tubes may require two or more adults in
good physical condition. With a second person
holding the opposite end, bring both sides of
the circle together and secure them. Don’t worry
if the frame does not seem sturdy; attaching the
jumping mat will tighten it up.
A A
AA
A
A
A
A
A
A
INSTALLATION AND ASSEMBLY
A
A
AA
A
AA
A
E
E
E
E
E
E
E
E
F
F
F
F
TRAMPOLINE ASSEMBLY

7
CAUTION
G) Then continue
connecting every
second spring.
H) Complete connecting
the remaining springs.
E) Continue using
the spring  xing tool to
connect a total of four
springs to the top rail
frame by placing them
¼ circle apart from one
another.
FF
F
F
STEP 4: CONNECTION OF LEG BASES TO
TOP RAIL CIRCLE
Attach the leg supports assembled in Step 2 to
the top rails, ensuring that the screw holes align,
as shown on the right. Repeat this step until
the full frame is standing. Tightly secure the leg
extensions to the top rail frame with the screws
and washers provided.
A
A
A A
A
E
F
F
FF
E
AA
E
HG
I
D
C
A
Frame with Assembled Jumping Mat
F) Connect all middle
springs, as shown.
INSTALLATION AND ASSEMBLY
TRAMPOLINE ASSEMBLY (continued)
Pay careful attention to hand position during spring assembly because connection points can pinch!
STEP 5: JUMPING MAT ASSEMBLY
A) Lay out the jumping mat inside the circular frame.
B) Hook the more rounded end of a spring onto one of the jumping mat’s triangular rings.
C) Grasp the handle of the spring  xing tool and hook the tool into the other end of the spring.
D) Pull the tool in the direction of the trampoline frame until the spring end is lined up with the hole in the
trampoline frame. Slide the spring end into the hole while removing the spring  xing tool.

8
STEP 6: SAFETY PAD ASSEMBLY
A) Lay the safety pad over the outer edge of the
circular frame. Be sure to cover all the springs,
as shown on the right.
B) Several sets of straps are attached to the
underside of the safety pad. Fasten these
straps to the jumping mat by threading them
through the triangular rings of the mat and
tying them in a knot. Alternatively, the straps
can be fastened to the frame tube by wrapping
them around a leg and tying in a knot. Refer to
the gure at the right to see how to attach the
straps correctly.
This is how the trampoline should look now.
INSTALLATION AND ASSEMBLY
TRAMPOLINE ASSEMBLY (continued)

9
Detailed View of Safety Enclosure Net
INSTALLATION AND ASSEMBLY
ITEM IMAGE PART
DESCRIPTION
TR1005
PART
NUMBER
TR1005
12-FT 4 LEGS
PART QTY
TR1010
PART
NUMBER
TR1010
14-FT 6 LEGS
PART QTY
AQuick Clamp TRP1112 16 TRP1112 12
BPole Cap TRP1113 8 TRP1113 6
CPole Bottom Plug TRP1114 8 TRP1114 6
DUpper Pole Tube TRP1115 8 TRP1115 6
ELower Pole Tube TRP1116 8 TRP1116 6
FFoam Tube TRP1117 16 TRP1117 12
GSafety Net TRP1118 1 TRP1119 1
HSpanner TRP1121 1 TRP1121 1
SAFETY ENCLOSURE PARTS LIST

10
B
F
D
F
E
C
A
A
STEP 1: ENCLOSURE POLE ASSEMBLY
A) Connect each upper pole tube to a lower pole tube, as shown on the right.
The upper and lower pole tubes already come with foam tubes assembled.
B) Place the pole cap onto the top of the upper pole tube. Insert the pole bottom plug into the bottom of
the lower pole tube.
C) Align the holes of an assembled safety enclosure pole with the holes of a leg extension. Then secure
each safety enclosure pole to the trampoline frame with a quick clamp set, which includes a long bolt,
plastic spacer, washer, and nut.
For this step, it is best to have one person hold the enclosure pole in place while a
second person fastens the pole to the leg support.
INSTALLATION AND ASSEMBLY
SAFETY ENCLOSURE ASSEMBLY
•The trampoline enclosure is only to be used as an enclosure for a
trampoline of a size for which the enclosure is designed.
•Failure to exactly follow all instructions for assembling the safety
enclosure properly could result in the enclosure not functioning,
as intended, to keep the trampoline user from falling off the edge
of the trampoline, which may result in serious injury.
Two adults are needed to assemble the safety enclosure. Assemblers should
wear sturdy shoes to protect their feet and to prevent falling during assembly.
NOTICE
NOTICE
WARNING