Haulotte Group Compact 10DX User manual

Operator's manual
H12/15/18 SX/SXL - HS 3388/4388/5388 RT/RTXL - COMPACT 10/12 DX - COMPACT 2668/3368 RT
4000014860 E10.16 USA / GB
Operator's manual
ENGINE-POWERED SCISSOR LIFTS
H12SX (HS 3388RT) - H12SXL (HS 3388RTXL) -
H15SX (HS 4388RT) - H15SXL (HS 4388RTXL) -
H18SX (HS 5388RT) - H18SXL (HS 5388RTXL) -
COMPACT 10DX (COMPACT 2668RT)
COMPACT 12DX (COMPACT 3368RT)
4000003660
X
USA

2 4000014860 E10.16 USA / GB
H12/15/18 SX/SXL - HS 3388/4388/5388 RT/RTXL - COMPACT 10/12 DX - COMPACT 2668/3368 RT

3
CONTENTS
Operator's manual
CONTENTS
1 - Operator's manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2 - After Sales Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3 - Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4 - HAULOTTE Services® contact details . . . . . . . . . . . . . . . 9
A
SAFETY PRECAUTIONS
1 - Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.1 - Operator's manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.2 - Symbols used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.3 - Decal colors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2 - Pre-operation instructions. . . . . . . . . . . . . . . . . . . . . . . . 13
2.1 - General instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.2 - Specific instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3 - Operation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.1 - Prohibitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.2 - Potential risks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3.2.1 - Risk of command system disturbance . . . . . . . . . . . . . . . . . . . . 16
3.2.2 - Risk of falling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3.2.3 - Risk of electrocution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.2.4 - Risk of uncontrolled movement and overturning . . . . . . . . . . . . 18
3.2.5 - Risk of burns and explosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.2.6 - Risk of crushing and collision . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
B
INTERVENOR'S RESPONSIBILITY
1 - Owner's (or hirer's) responsibility. . . . . . . . . . . . . . . . . . 23
2 - Employer's responsibility . . . . . . . . . . . . . . . . . . . . . . . . 23
3 - Trainer's responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4 - Operator's responsibility . . . . . . . . . . . . . . . . . . . . . . . . . 23
5 - Inspection and maintenance . . . . . . . . . . . . . . . . . . . . . . 24

4
Operator's manual
C
MACHINE LAYOUT
1 - Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2 - Main components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3 - Safety devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
3.1 - Sliding (or swinging) intermediate guardrail. . . . . . . . . . . . . . . . . . . . . . . 28
3.2 - Anchorage point (Please see machine configuration) . . . . . . . . . . . . . 29
3.3 - Maintenance support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3.4 - Folding guardrails - Option. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
4 - Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
4.1 - Classification plan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
4.1.1 - Red decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
4.1.2 - Orange decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
4.1.3 - Yellow decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
4.1.4 - Other decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
4.1.5 - Green decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
4.1.6 - Blue decals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
4.2 - Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
5 - Control boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
5.1 - Ground control box - Emergency control box. . . . . . . . . . . . . . . . . . . . . 60
5.2 - Platform control box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
D
OPERATING PRINCIPLE
1 - Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
2 - Safety devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
2.1 - Activation of controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
2.2 - Plateform lifting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
2.3 - Drive speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
2.4 - Anti-crush system when lowering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
2.5 - On-board electronics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
2.6 - Thermostat location / limitation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
2.7 - Detection of internal fault . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
2.8 - Automatic engine cut-out. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
2.9 - Load limiting in the platform (if fitted) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
2.10 - Chassis tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
2.11 - Drive buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

5
CONTENTS
Operator's manual
E
DRIVING
1 - Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
2 - Checks before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
2.1 - Visual inspections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
2.1.1 - General mechanical functions . . . . . . . . . . . . . . . . . . . . . . . . . . 74
2.1.2 - Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
2.2 - Functional tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
2.2.1 - Safety features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
2.2.2 - Ground box controls (emergency station). . . . . . . . . . . . . . . . . . 77
2.2.3 - Platform box controls (driving station) . . . . . . . . . . . . . . . . . . . . 78
2.3 - Periodical checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
2.4 - Repairs and adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
2.5 - Inspection / Testing requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
3 - Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
3.1 - Test procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
3.1.1 - E-stop button operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
3.1.2 - Tilt sensor switch operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
3.1.3 - Visual and sound alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
3.1.4 - Weighing system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
3.2 - Operation from ground position. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
3.2.1 - Machine start-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
3.2.2 - Machine shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
3.2.3 - Movement control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
3.2.4 - Other controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
3.3 - Operations from the platform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
3.3.1 - Machine shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
3.3.2 - Movement control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
3.3.3 - Other controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
F
SPECIAL PROCEDURE
1 - Emergency lowering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
1.1 - Principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
1.2 - Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
1.3 - Extraordinary procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
2 - Lowering for repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
2.1 - Principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
2.2 - Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
3 - Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
3.1 - Disengaging the drive hubs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
3.2 - Brake release. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
3.3 - Re-engaging the drive hubs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
4 - Loading and unloading . . . . . . . . . . . . . . . . . . . . . . . . . . 96
4.1 - Principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
4.1.1 - Lifting operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
4.1.2 - Lifting operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
4.2 - Putting in transport position. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
4.3 - Unloading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
4.4 - Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
5 - Detection of internal fault. . . . . . . . . . . . . . . . . . . . . . . . 108
5.1 - Principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
5.2 - Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
6 - On-board generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
6.1 - Principle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
6.2 - Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

6
Operator's manual
G
TECHNICAL SPECIFICATIONS
1 - Main characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
1.1 - Technical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
1.2 - Technical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
2 - Overall dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
3 - Working area / Range of motion . . . . . . . . . . . . . . . . . . 123
3.1 - Machine COMPACT 10DX (COMPACT 2668RT) . . . . . . . . . . . . . 123
3.2 - Machine COMPACT 12DX (COMPACT 3368RT) . . . . . . . . . . . . . 124
3.3 - Machine H12SX (HS3388RT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
3.4 - Machine H15SX (HS4388RT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
3.5 - Machine H18SX (HS5388RT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
3.6 - Machine H12SXL (HS3388RTXL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
3.7 - Machine H15SXL (HS4388RTL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
3.8 - Machine H18SXL (HS5388RTXL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
4 - AS - CE standard specificities . . . . . . . . . . . . . . . . . . . 131
4.1 - Overload test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
4.2 - Functional test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
4.3 - Stability test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
5 - Declaration of conformity . . . . . . . . . . . . . . . . . . . . . . . 137
H
INTERVENTION REGISTER
1 - Intervention register. . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

7
4000014860 E10.16 USA / GB
H12/15/18 SX/SXL - HS 3388/4388/5388 RT/RTXL - COMPACT 10/12 DX - COMPACT 2668/3368 RT
You have just purchased a HAULOTTE® product
and we would like to thank you for your business.
1 - Operator's manual
As stated on the delivery slip, this manual is one of the documents in the on-board document holder
provided upon delivery of your HAULOTTE® machine.
The operator manual is a translation of the original instructions.
Safe operation of this product can only be assured if you follow the operating instructions contained in
this manual are followed.
We would particularly like to draw your attention to 2 essential points :
• Compliance with safety instruction (machine, use, environment)
• Use of the equipment within the performance limits.
2 - After Sales Service
Our HAULOTTE Services® After Sales Service is at your disposal throughout your machine's service
life to ensure the optimum use of your HAULOTTE product.
• When contacting our After Sales Service, ensure that you provide the machine model and serial
number.
• When ordering any consumables or spare parts, please use this manual and the Haulotte Essential
catalogue to receive your genuine HAULOTTE spare parts, your only guarantee of parts
interchangeability and correct machine operation..
• If there is an equipment malfunction involving a HAULOTTE® product, then contact HAULOTTE
Services® immediately even if the malfunction does not involve material and/or bodily damage..
• HAULOTTE® must be informed in the event of an incident that either involves one of these products
or has caused bodily injury or significant deterioration of property (personal property or the product);
contact HAULOTTE Services® immediately (See : HAULOTTE Services® contact details)
With regard to the designation of our equipment, we stress that this is purely for commercial purposes and
not to be confused with the technical specifications. Only the specifications in this manual should be used
to study the suitability of the equipment for the intended use.

8 4000014860 E10.16 USA / GB
H12/15/18 SX/SXL - HS 3388/4388/5388 RT/RTXL - COMPACT 10/12 DX - COMPACT 2668/3368 RT
3 - Compliance
We would like to remind you that HAULOTTE® complies with the provisions of any applicable
directives applicable to this type of machine.
HAULOTTE advises you that NO modifications carried out without the written permission
of HAULOTTE® will void the HAULOTTE warranty.
HAULOTTE® cannot be held liable for any changes to the technical characteristics/specifications
contained in this manual.
HAULOTTE® reserves the right to alter technical specifications and to make improvements or
modifications to the machine without modifying this manual.
Certain options can modify the machine's operating characteristics and its associated safety. If your
machine was originally delivered with options fitted, replacing a safety component associated with a
particular options not require any particular precautions other than those associated with the installation
itself (static test).
Otherwise, it is essential to follow the manufacturer's recommendations as stated below :
• Installation by authorised HAULOTTE® personnel only.
• Update the manufacturer's identification plate.
• Have stability tests carried out by a certified agency/competent person.
• Ensure decal compliance.

9
4000014860 E10.16 USA / GB
H12/15/18 SX/SXL - HS 3388/4388/5388 RT/RTXL - COMPACT 10/12 DX - COMPACT 2668/3368 RT
4 - HAULOTTE Services® contact details
HAULOTTE Services® contact details
HAULOTTE FRANCE
PARC DES LUMIERES
601 RUE NICEPHORE NIEPCE
69800 SAINT-PRIEST
TECHNICAL Department:
[phone]
SPARE PARTS : [phone]
FAX : [phone]
E-mail : [e-mail]
www.haulotte.fr
HAULOTTE ITALIA
VIA LOMBARDIA 15
20098 SAN GIULIANO MILANESE
(MI)
TEL: [phone]
FAX: [phone]
E-mail : [e-mail]
www.haulotte.it
HAULOTTE HUBARBEITSBÜHNEN GmbH
Ehrenkirchener Strasse 2
D-79427 ESCHBACH
TEL : [phone] - 0
FAX : [phone] - 119
E.mail : [email protected].com
www.haulotte.de
HAULOTTE VOSTOK
35, SVOBODY STREET
Bldg. 19
125362 MOSCOW
RUSSIA
TEL/FAX : +7
495
221 53 02 / 03
E.mail : [e-mail]
www.haulotte-international.com
HAULOTTE DO BRASIL
AV. Tucunaré, 790
CEP: 06460
-
020 – TAMBORE
BARUERI
–
SAO PAULO
–
BRASIL
TEL
: [phone]
FAX
: [phone]
E.mail
:
[email protected]m.br
www.haulotte
.com.br
HAULOTTE IBERICA
C/ARGENTINA N° 13 - P.I. LA GARENA
28806 ALCALA DE HENARES
MADRID
TEL : [phone]
TEL SAT : [phone]
FAX : [phone]
E.mail : [email protected]om
www.haulotte.es
HAULOTTE POLSKA Sp. Z.o.o.
UL. GRANICZNA 22
05-090 RASZYN - JANKI-
TEL : [phone]
FAX : [phone]
E-mail :
haulottepolsk[email protected]
www.haulotte.pl
HAULOTTE MÉXICO, Sa de Cv
Calle 9 Este, Lote 18, Civac, Jiutepec,
Morelos
CP 62500 Cuernavaca
México
TEL : [phone]
FAX : [phone]
E-mail : [email protected]
www.haulotte-international.com
HAULOTTE PORTUGAL
ESTRADA NACIONAL NUM. 10
KM. 140 - LETRA K
2695 - 066 BOBADELA LRS
TEL : + 351 21 995 98 10
FAX : + 351 21 995 98 19
E.mail : haulotteportug[email protected]
www.haulotte.es
HAULOTTE SINGAPORE Pte Ltd.
No.26 CHANGI NORTH WAY,
SINGAPORE 498812
Parts and service Hotline:
[phone]
FAX : [phone]
E-mail: [e-mail]
www.haulotte.sg
HAULOTTE MIDDLE EAST FZE
PO BOX 293881
Dubaï Airport Free Zone
DUBAÏ
United Arab Emirates
TEL : [phone]
FAX : [phone]
E-mail : haulottemiddle-
[email protected]
www.haulotte-international.com
HAULOTTE SCANDINAVIA AB
Taljegårdsgatan 12
431 53 Mölndal
SWEDEN
TEL : [phone]
FAX : [phone]
E-mail : [email protected]tte.com
[email protected]om
www.haulotte.se
HAULOTTE TRADING (SHANGHAI)
Co. Ltd.
#7 WORKSHOP
No 191 HUA JIN ROAD
MIN HANG DISTRICT
SHANGHAI 201108 CHINA
TEL : [phone]
FAX : [phone]
E-mail :
[email protected]
www.haulotte.cn
HAULOTTE ARGENTINA
Ruta Panamericana Km. 34,300
(Ramal A Escobar)
1615 Gran Bourg
(Provincia de Buenos Aires)
Argentina
TEL.: [phone]
FAX. [phone]
E-mail : [e-mail]
www.haulotte-international.com
HAULOTTE UK Ltd
STAFFORD PARK 6
TELFORD - SHROPSHIRE TF3 3AT
TEL : [phone]
FAX : + 44 (0)1952 292758
E.mail : [e-mail]
www.haulotte.co.uk
HAULOTTE GROUP / BILJAX
125 TAYLOR PARKWAY
ARCHBOLD, OH 43502 – USA
TEL : +1
419
445 8915
FAX :+1
419 445 0367
Toll free : [phone]
E.mail : [email protected].com
www.haulotte-usa.com
HAULOTTE GROUP
1301 E PATRICK STREET
FREDERICK, MD 21701 – USA
TEL : [phone]
FAX :[phone]
Toll free : [phone]
E.mail : [email protected]om
www.haulotte
HAULOTTE CHILE
El Arroyo 840
Lampa (9380000)
Santiago (RM)
TEL : + 562 2 3727630
E.mail : [email protected]
www.haulotte-chile.com
-usa.com
HAULOTTE NETHERLANDS BV
Koopvaardijweg 26
4906 CV OOSTERHOUT - Nederland
TEL : [phone]
FAX : [phone]
E.mail :
[email protected]
HAULOTTE AUSTRALIA PTY Ltd
46 GREENS ROAD
DANDENONG – VIC – 3175
TEL : [phone]
FAX : [phone]
E.mail :
l
[e-mail]
hl
HAULOTTE INDIA
Unit No. 1205, 12th foor,Bhumiraj Costarica,
Plot No. 1&2, Sector 18,
Palm Beach Road,
Sanpada, Navi Mumbai- 400 705
Maharashtra, INDIA
Tel. : [phone] to 35
E-mail : [email protected]
www.haulotte.in

10 4000014860 E10.16 USA / GB
H12/15/18 SX/SXL - HS 3388/4388/5388 RT/RTXL - COMPACT 10/12 DX - COMPACT 2668/3368 RT
Notes

A
B
C
D
E
F
G
H
I
11
4000014860 E10.16 USA / GB
H12/15/18 SX/SXL - HS 3388/4388/5388 RT/RTXL - COMPACT 10/12 DX - COMPACT 2668/3368 RT
A - Safety precautions
Safety precautions
1 - Recommendations
1.1 - OPERATOR'S MANUAL
This operators manual is specific to the HAULOTTE® products listed on the cover page of this
manual..
1.2 - SYMBOLS USED
Symbols are used to alert the operator to safety precautions or to highlight practical
information.
Legend
The operator manual does not replace the basic training required for all worksite equipment operators.
HAULOTTE® has compiled this manual to assist in safe and efficient operation of the products covered
by the manual.
This manual must be kept on the machine (or in the cab in its storage case. The manual must be available
to all operators and must be kept in good condition. Additional copies can be ordered from HAULOTTE
Services®.
Symbol Description
Danger : Risk of injury or death
Caution : Risk of material damage
Prohibition relating to work safety and quality
Reminder : No identified risk, but a reminder of the need for common sense,
good practice or pre-action prerequisites
Cross-reference to another part of the manual (see section or sheet)
Cross-reference to another manual (see manual)
Cross-reference to repairs (contact HAULOTTE Services®)
N.B. : Additional technical information

12 4000014860 E10.16 USA / GB
H12/15/18 SX/SXL - HS 3388/4388/5388 RT/RTXL - COMPACT 10/12 DX - COMPACT 2668/3368 RT
A - Safety precautions
1.3 - DECAL COLORS
The potential dangers and any specific regulations are indicated around the product by decals
and identification plates.
Familiarize yourself with the decals and their respective color codes.
Decal color code
Decal color code-For Russia and the Ukraine only
The decals must be kept in good condition. Additional decals can be ordered from HAULOTTE Services®.
Decals Color Description
Red Potentially fatal danger
Orange Risk of serious injury
Yellow Risk of material damage and/or minor injury
Other Additional technical information
Green Maintenance operation or information
Decals Color Description
Red Prohibitions - Danger
Yellow Warning : Risk of material damage and/or minor injury
Blue Precaution
Blue Information
Other Additional technical information

A
B
C
D
E
F
G
H
I
13
4000014860 E10.16 USA / GB
H12/15/18 SX/SXL - HS 3388/4388/5388 RT/RTXL - COMPACT 10/12 DX - COMPACT 2668/3368 RT
A - Safety precautions
2 - Pre-operation instructions
2.1 - GENERAL INSTRUCTIONS
• On soft, unstable or cluttered ground.
• With wind blowing faster than the permissible limit. Check the maximum allowable value in the
technical characteristics / specifications ( Section G 1-Main characteristics). Consult the
Beaufort scale ( Section A 3.2.4-Risk of uncontrolled movement and overturning).
• Close to power lines. Respect the safety distance ( Section A 3.2.3-Risk of electrocution).
• At ambient temperatures higher than 45 °C(113 °F) and lower than -15 °C(5 °F) .
Consult HAULOTTE® if it is necessary to work outside this range.
• In an explosive atmosphere.
• During storms (risk of lightning).
• In the presence of strong electromagnetic fields.
N.B.-:-You are advised to use the machine under "NORMAL" climatic conditions.. If you need to use
the machine in climatic conditions likely to cause deterioration (extreme : humidity, temperatures,
salinity, corrosiveness, atmospheric pressure), contact HAULOTTE Services®. Reduce intervals
between servicing.
N.B.-:-Whilst the machine is not in use, care must be taken to ensure that if the machine is not locked
in a secure location, that the unit key switch is removed to prevent unauthorised use of the machine.
• The employer has the obligation to issue a driving permit to the operator.
• The employer is obliged to inform the operator of the local regulations.
Do not operate the product in the following situations :

14 4000014860 E10.16 USA / GB
H12/15/18 SX/SXL - HS 3388/4388/5388 RT/RTXL - COMPACT 10/12 DX - COMPACT 2668/3368 RT
A - Safety precautions
2.2 - SPECIFIC INSTRUCTIONS
• If the load in the platform exceeds the maximum load authorized. Check the maximum allowable value
in the technical characteristics / specifications ( Section G 1-Main characteristics).
• If the ground slope is greater than the permissible limit. Check the maximum allowable value in the
technical characteristics / specifications ( Section G 1-Main characteristics).
• In a non-ventilated area as the exhaust gases are toxic.
• At night unless the machine is equipped with the optional light.
• If the number of persons exceeds the permissible limit. Check the maximum allowable value in the
technical characteristics / specifications ( Section G 1-Main characteristics).
• If the side force is greater than the permissible force. Check the maximum allowable value in the
technical characteristics / specifications ( Section G 1-Main characteristics).
Do not operate the product in the following situations :

A
B
C
D
E
F
G
H
I
15
4000014860 E10.16 USA / GB
H12/15/18 SX/SXL - HS 3388/4388/5388 RT/RTXL - COMPACT 10/12 DX - COMPACT 2668/3368 RT
A - Safety precautions
3 - Operation instructions
3.1 - PROHIBITIONS
It is preferable to operate the machine on flat, consolidated ground (tarmac, concrete, etc.).
• Never use a faulty machine (hydraulic leaks, worn tires/tyres, malfunction).
• Never operate the machine controls suddenly.
• Never place the machine against a structure to hold that structure in place.
• Never use the machine to tow other machines or to drag materials.
• Never expose the batteries or electrical components to water (pressure cleaner, rain).
• Never disable the safety devices.
• Do not make contact with a fixed or mobile obstacle. The contact can cause premature deterioration of
the structure and lead to the corruption of certain safety elements.
• Do not climb onto the covers.
• Never use the machine with only an operator in the platform. A second person competent in the operation
of emergency retrieval, should be present on the ground in case of an emergency.
• Never use the machine when the platform is cluttered.
• Never increase the surface area of the platform by using floor extensions or accessories not authorized
by HAULOTTE®.
• Never leave the hydraulic cylinders fully extended or retracted before switching off the machine, or when
stationary for an extended period of time.
• Never use the machine with material or objects suspended from the guard-rail.
• Never use the machine with elements that can increase the wind force (panels).
• Never increase the working height by using attachments (ladder).
• Never use the guardrail as a means of access for climbing in or out of the platform. The basket can be
easily accessed in its low position. For machines fitted with : Steps have been provided for this purpose
where required.
• Never climb on the guardrail.
• Do not use the machine if the guard rails are not correctly installed and locked.
• Never use the machine without fitting the sliding (or rotating) middle rail, closing the safety gate or the
swing gates beforehand.
• Never use the machine as a crane, material lift or elevator.
• Never use the machine for any other purpose than to transport people, their tools and material to the
desired place.
• Never drive fast in narrow or cluttered areas. Keep speed under control in bends.
• Never tow the machine over extended distances (it must be transported on a trailer).

16 4000014860 E10.16 USA / GB
H12/15/18 SX/SXL - HS 3388/4388/5388 RT/RTXL - COMPACT 10/12 DX - COMPACT 2668/3368 RT
A - Safety precautions
3.2 - POTENTIAL RISKS
3.2.1 - Risk of command system disturbance
Risk of disrupted movement. Maintain clearance from high voltage lines or magnetic fields.
3.2.2 - Risk of falling
When in the platform, respect the following instructions :
• Carry individual protection equipment adapted to the work conditions and local
rules.
• Avoid contact with fixed or mobile obstacles (other machines).
• Ensure that the adjustable midrail is closed (low position and against the guardrails).
• Ensure that the gate is closed and locked (For machines fitted with).
• Hold on securely to the guardrails during elevation and driving.
• Do not sit, stand, or climb on the platform guard rails.
• Ensure that guard rails are correctly installed and locked.
• Always keep your feet firmly on the floor of the platform.
• Remove any trace of oil or grease from the steps, floor, handrail and the guardrails.
• Keep the floor of the platform free of debris.
• Do not leave the platform until it is fully in its stowed position.
• Do not climb on to the platform if the machine is not in the stowed position.
To climb up or climb down from the platform :
• The machine must be completely stowed.
• Face the machine to access the entry opening to the platform
• Keep 3 support points between the steps and the guardrail

A
B
C
D
E
F
G
H
I
17
4000014860 E10.16 USA / GB
H12/15/18 SX/SXL - HS 3388/4388/5388 RT/RTXL - COMPACT 10/12 DX - COMPACT 2668/3368 RT
A - Safety precautions
3.2.3 - Risk of electrocution
The machine is not electrically insulated and does not offer any insulation
protection.
The risks of electrocution are high in the following situations :
• Close to live power lines, consider the movement of the machine and the sway of the electric power
lines particularly in windy conditions.
• In the event that you were to make accidental contact with a high voltage line, wait for the power to
the line to be switched off before operating the machine.
• During storms.
Never use the machine as a welding earth.
Maintain a minimum safe distance with regard to power lines and electrical devices.
Respect the local rules and the minimum safety distance from power lines.
Minimum safe approach distances
N.B.-:-This table is applicable, except when the local regulations are more strict.
Electric voltage Minimum safety distance
Mètre Feet
0 - 300 V Avoid contact
300 V - 50 kV 310
50 - 200 kV 515
200 - 350 kV 620
350 - 500 kV 825
500 - 750 kV 11 35
750 - 1000 kV 14 45

18 4000014860 E10.16 USA / GB
H12/15/18 SX/SXL - HS 3388/4388/5388 RT/RTXL - COMPACT 10/12 DX - COMPACT 2668/3368 RT
A - Safety precautions
3.2.4 - Risk of uncontrolled movement and overturning
When in the platform, respect the following instructions :
• Before operating the machine on any indoor or outdoor surface (premises, bridge,
truck, etc.), check that the surface is capable of supporting the combined machine
weight and platform capacity. Check the maximum allowable value in the technical characteristics /
specifications ( Section G 1-Main characteristics).
• Remain vigilant of driving direction reversal at the platform. Check the driving direction with the help
of the red or green arrow on the chassis relative to the red and green arrows on the platform control
box.
• Always ensure that the chassis is never driven any closer than 1 m(3 ft3 in) to holes, bumps, slopes,
obstructions, debris and ground coverings that may hide holes and other dangers.
• During motion direction reversal from the platform or ground control box, the joysticks or switches
must be in neutral position before reversing the direction of motion.
• Taking note of the overall load dimensions and weight, place the loads in the centre of the platform or
distribute them it a uniform manner.
• If the tilt alarm sounds when the platform is raised, lower platform completely, then reposition machine
onto level ground before raising platform.
• Do not drive the machine on slopes or tilts beyond the design limits. Check the maximum allowable value
in the technical characteristics / specifications( Section G 1-Main characteristics).
• Do not travel down slopes in high speed.
• Do not use the machine (elevation and travel) on an incline greater than that permitted by the slope
sensor.
• Do not drive in reverse (direction opposite the field of vision).
• Never use the machine in winds exceeding the permissible limit.
• Do not increase the surface area exposed to wind. The greater the surface area exposed, the more
unstable the machine becomes.
For COMPACT 10DX (COMPACT 2668RT) - COMPACT 12DX (COMPACT 3368RT) :
• Make sure manual brake system is closed (tap is completely screwed in).
• Do not operate machine if brakes are released.
• Section F 2.1Manual brake release

A
B
C
D
E
F
G
H
I
19
4000014860 E10.16 USA / GB
H12/15/18 SX/SXL - HS 3388/4388/5388 RT/RTXL - COMPACT 10/12 DX - COMPACT 2668/3368 RT
A - Safety precautions
N.B.-:-The Beaufort scale measures the wind force with a graduation system. A wind speed range at 10
m(32 ft9 in) above flat, clear land is associated with each degree.
Beaufort scale
Force Meteorological
description Observed effects m/s km/h mph
0Calm Smoke rises vertically. 0 - 0,2 0 - 1 0 - 0,62
1Very light breeze Smoke indicates the wind direction. 0,3 - 1,5 1 - 5 0,62 - 3,11
2Light breeze Wind felt on the face. Leaves rustle.
Weather vanes turn. 1,6 - 3,3 6 - 11 3,72 - 6,84
3Slight breeze Leaves and small twigs in constant
motion. Flags move slightly. 3,4 - 5,4 12 - 19 7,46 - 11,8
4Nice breeze Raised dust and loose papers. Small
branches are moved. 5,5 - 7,9 20 - 28 12,43 - 17,4
5Nice breeze Small trees in leaf to sway. Crested
wavelets form on inland waterways. 8,0 - 10,7 29 - 38 18,02 - 23,6
6Cool wind
Large branches in motion. Power lines
and chimneys 'sing'. Umbrellas used
with difficulty.
10,8 - 13,8 39 - 49 24,23 - 30,45
7Strong cool wind Whole trees in motion. Inconvenience
felt when walking against wind. 13,9 - 17,1 50 - 61 31 - 37,9
8Squall Some branches break. Generally we
cannot walk against the wind. 17,2 - 20,7 62 - 74 38,53 - 45,98
9Strong squall
The wind causes slight damage to
buildings. Tiles and chimney stacks are
blown off.
20,8 - 24,4 75 - 88 46,60 - 54,68

20 4000014860 E10.16 USA / GB
H12/15/18 SX/SXL - HS 3388/4388/5388 RT/RTXL - COMPACT 10/12 DX - COMPACT 2668/3368 RT
A - Safety precautions
3.2.5 - Risk of burns and explosion
N.B.-:-Acid is neutralized with sodium bicarbonate and water.
For any intervention on the power sources, wear glasses and protective clothes (acid spray).
• Do not work in an explosive or flammable atmosphere (spark, flame, etc.).
• Do not touch the hot parts of the hydraulic power source (engine, filters, etc.).
• Do not bridge the battery terminals with metallic objects.
• Do not service the battery in proximity of spark, open flame, lit cigarettes.
• Do not fill up the fuel tank, when the engine is running and/or near a flame.