Haulotte 4527A User manual

Haulotte 4527A  Quick-start Guide Page1

Hydraulic Articulating Boom Lift

1- Park lift on a reasonably flat surface with 14 feet of clearance left to right for outriggers. Outriggers can
level the unit on a grade of up to 12.5°
2- Set parking brake on lift and disconnect from vehicle, unhook all safety chains, cables, and electrical
connections.
3- Release the two green handled lever locks, which secure the boom for transport.
4- Make sure that BOTH red emergency stop buttons are PULLED OUT. There is one on each control panel.
The unit will not power on if one of these is pressed in.
5- At the ground control panel, turn key counter-clockwise for operation from the base.
6- Press and hold the EXTEND and AUTO LEVEL buttons  SIMULTANEOUSLY until unit stops beeping and all
outrigger lights are green.


Please call us anytime at [phone] with any questions or issues.

Haulotte 4527A  Quick-start Guide Page2

7- You may now control the lift from the ground panel, if you wish to control the lift from the
platform panel, you must turn the key clockwise. The lift will now only be controlled by the platform panel.
8- To operate the lift, choose an ARROW BUTTON to press and hold, then also press and hold 1 of the 4 SPEED
BUTTONS.
*Please note that every function requires the operator to press and hold 2 buttons simultaneously.





Please call us anytime at [phone] with any questions or issues.

Haulotte 4527A  Quick-start Guide Page3



Please call us anytime at [phone] with any questions or issues.