Hawkeye Mfg Little Pilot User manual

1
2 3 4 5 6 7 8
1
HAWK-EYE Little Pilot 5" FPV monitor
Specifications and Features
1. Mute button
2. Up/Auto channel search button
3. Power/ Menu button
4. Down/Reference scale show/hide button
5.Video output port
6.Video input port
7.Battery charging status light
(will turn OFF when the battery is fully charged)
8.Micro USB Charge port

2
LED Screen
Resolution 800×480（HD)
Backlight
LED
Brightness 700 cd/m2（HD）
Aspect ratio
16：9
Response time
10ms
Color system
PAL/NTSC
Power Supply
Battery life
2.5-3 hours
Input SignalVideo（PAL/NTSC）
Output
Signal
Video
Matching antenna Interface RP-SMA
5.8G Sensitivity -94db
Button name
Function
Shortcut function
Mute button
Mute
Adjustment
button(+)
Item increase Auto channel search
Adjustment
button(-)
Item decrease Reference scale display
Power/Menubutton
Enter menu
Turn-on/off
Battery voltage System running time Signal strength
USB externalpower source Mute symbol
Reference scale
3.85 00：30 99

3
External Video Interface
Display Interface Setting
Press Menubutton to popup menu setting:
Frequency Group Selection
You can manually select the desired frequency from 4 groups: A, B, C and D,
or select SCAN option to start auto search.
Thirty-two 5.8G channels are covered:
A1: 5.645G B1: 5.740G C1: 5.725G D1: 5.733G
A2: 5.665G
B2: 5.760G
C2: 5.745G
D2: 5.752G
A3: 5.865G
B3: 5.780G
C3: 5.765G
D3: 5.771G
A4: 5.705G
B4: 5.800G
C4: 5.785G
D4: 5.790G
A5: 5.885G
B5: 5.820G
C5: 5.805G
D5: 5.809G
A6: 5.905G
B6: 5.840G
C6: 5.825G
D6: 5.828G
A7: 5.925G
B7: 5.860G
C7: 5.845G
D7: 5.847G
A8: 5.945G
B8: 5.880G
C8: 5.865G
D8: 5.866G
3.85 00：30 AV3

4
Format:
3options are provided: AUTO/
PAL/NTSC. If AUTO selected, the input
video system will be automatically
identified. System setting will cause
display failure.
GAMMA:
Control buttons: (-), (+). Range: C1-C3.
Brightness:
Control buttons: (-), (+). Range: 1-99.
Contrast:
Control buttons: (-), (+). Range: 1-99.
Saturation:
Control buttons: (-), (+). Range: 1-99.
Voltage trimming:
Range:-10~+10 (-0.1V~+0.1V)
Language:
Control buttons: (-), (+).
Options: Chinese and English
Reset:
This option leadsback to factory default
settings.
Auto Channel Search
Press “+ button” to start auto channel search. The channel with the strongest
signal will be chosen.
Show/hide Reference Scale
Reference scale can be showed by pressing “- button” once and hided by
pressing the same button again.
Battery Charging
Connect the machine to a phone charger using the included USB cable. Using 1A
charger or turning off the machine will increase the charging rate. The Charging
Status Light remains ON while the battery is charging and it will turn OFF when the
battery is fully charged. Charging current can be 500mA or 1A.

5
FAQ
The video displayed is black-and-white:
Check whether the camera output is black-and-white (some cameras might
automatically shift to black-and-white in low-light conditions)
Video display is abnormal:
Try resetting the machine.
Set the video format to AUTO.
No response when turned on:
Try charging the machine for 30 minutes, notice whether the Charging Status
Light is on or not.
No channel can be received:
Install antennas, and move the monitor close to the 5.8 GHz transmitter.
Try searching channels manually.
No sound:
Try pressing the Mute button to turn on the sound.