Hawking HNC720G User manual

Monitor and Secure Your Home or Office from Anywhere in the World !
The Hawking Net-Vision HNC720G is a high performance Wireless-G standalone camera
system with its own built-in CPU and web server, and thereby provides an ideal solution for remote
monitoring, surveillance, or sending live video over the Internet. The camera allows remote access
and management from anywhere in the world via the Internet or an existing LAN, and supports
both the Wireless 802.11g/b and 10/100Mbps Wired Fast Ethernet standards.
The Hawking HNC720G features a CCD image sensor and MPEG-4 compression to provide superior
quality picture and streaming video at up to 30 frames per second. Remote-motion technology can
be utilized via web interface or remote control, and allows the camera to pan across 270 degrees,
as well as tilt through 90 degrees. Users can scan a desired area from the safety and comfort of a
remote location. Built-in motion detection adds an extra measure of security. Included with the
camera is a powerful management and control software application that allows the user to playback
video, record directly to the hard drive, operate remote-motion control, and trigger automatic
recording via motion detection. A built-in microphone also enables audio monitoring.
The network camera features a built-in web server and utilizes its own IP address, thereby
eliminating the need to be attached to a PC. The cameras connect directly to an existing Ethernet
network, allowing users to view live video both from within their local area network (LAN) or from
outside the network via the Internet. Versatile and full-featured, the HNC720G offers a broad
array of applications and can be used to monitor various critical locations such as homes, offices,
banks, schools, childcare centers, hospitals, and other industrial and public areas.
System Requirements:
· CPU: Pentium III, 800 MHz or above (required for use with application software)
· Supported Operating Systems: Win 98SE, Win2000, WinME, WinXP
· VGA Card Resolution: 800 x 600 or above
· Internet Explorer 5.x or above
CA R E FR E E M ULTIM EDIA
CO NNECT W H ER EV ER Y O U W A N T•W H EN EV ER Y O U W A NT
W i r e l e s s -G R e m o t e -M o t i o n
CC D N e t w o r k Ca m e r a
HNC720G
Superior Quality CCD Image Sensor,
with MPEG-4 Compression
Remotely Controlled Pan/Tilt Function
Fully Compatible with 802.11g/b Networks
PACKAGE CONTENTS:
wOne HNC720G Wireless-G Remote-Motion
CCD Network Camera
wOne Installation CD-ROM
wOne Quick Installation Guide
wTwo Antennas
wOne DC Power Adapter
wOne RJ-45 Ethernet Cable
wOne IR Remote Controller
TM

SPECIFICATIONS:
Video
wSupported Algorithms: MPEG-4 for streaming video
JPEG for still images
wAdjustable image size, quality and bit-rate
wThree configurable motion detection windows
wFlip & mirror
wAudio/Video output connector
Video Resolution
wNTSC: Up to 30fps at 176x144
Up to 30fps at 352x288
wPAL: Up to 25fps at 176x144
Up to 25fps at 352x288
Audio
w24kbps
wBuilt-in microphone
wExternal microphone connector
wAudio/Video output connector
Pan/Tilt
wPan: range +/- 135 degrees, 10~50 degrees/sec
wTilt: range +90 ~ -45 degrees, 7~25 degrees/sec
wAuto pan mode
wAuto patrol mode
Security
wThree levels of user priviledge
w128-bit WEP encryption
wID/Password authentication
Connectivity
wWireless 802.11g/b
wWired 10Base-T Ethernet or 100Base-TX Fast
Ethernet
Additional Connectors
wLAN Port: (1) RJ-45, 10/100M, Auto-sensed
wTwo RP-SMA Antenna Connectors
wExternal I/O Connectors
RELATED PRODUCTS:
HNC300 Network Camera
HNC320W Wireless Network Camera
HWR54G 54M Wireless-G Router
SETUP DIAGRAM:
CA R E FR E E M ULTIM EDIA
CO NNECT W H ER EV ER Y O U W A N T•W H EN EV ER Y O U W A NT
HNC720G
Alarm I/O & Motion Detection
Built-in Web Server
Quick and Easy Setup & Software
Two Year Warranty
HAWKING TECHNOLOGIES, INC
USA: 15281A Barranca Parkway, Irvine, CA 92618
Europe: Rotterdam, The Netherlands
Sales: 888.662.8828, 949.580.0888 Fax: [phone]
Email:[e-mail] Email: [e-mail]
READY, NETWORK & GO!
It's easy to install, it's easy to use!
Step 1 - Connect the HNC720G
Connect the HNC720G to your LAN using a standard RJ-45 (Cat 5) cable.
Step 2 - Setup and Installation
Insert the Installation CD and use the Setup Wizard to install the camera.
Step 3 - Configure the HNC720G
Launch your web browser and type in the camera's IP address. Ensure that your "ActiveX"
controls are installed and start viewing. For custom configuration, click on "Configuration"
or "Client Settings". It's that easy!
Camera Specifications
w1/4" color CCD image sensor
w512(H) x 492(V) (NTSC) / 512(H) x 582(V) (PAL)
w1 Lux/F2.0
wAGC/AWB
wElectronic Shutter: 1/60 (1/50) to 1/100,000 sec.
wLens: 4.3mm, F2.0
LED Indicators
wPower/Microphone
wActivity
Dimensions
w103mm x 105mm x 113mm (LxWxH)
Weight
w394.8g
Power
w12V DC, 1.5A external universal power supply
EMI Certifications: CE, FCC
Copyright © Hawking Technologies, Inc. 2005. All rights reserved. All trademarks herein are the property of their respective owners.
Product specification subjects to change without notice.
W i r e l e s s -G R e m o t e -M o t i o n
CC D N e t w o r k Ca m e r a
SPECIFICATIONS:
WLAN
w2.4GHz 802.11g/b
wWireless Speed: 54/48/36/24/18/12/9/6/11/5.5/2/1Mbps adaptive data rate