Hawksmoor 95074 User manual

SKU: 95074
18V 26cm Cordless Grass Trimmer
Original User’s Instructions
READ BEFORE USE
PLEASE KEEP THESE INSTRUCTIONS FOR FURTHER REFERENCE

2
www.coreservice.co.uk
Hotline: [phone]
Email [email protected]
CONTENT
∫WHAT’S IN THE BOX ---------------------------------------------------------- 3
∫TOOLS REQUIRED ------------------------------------------------------------ 4
∫SPECIFICATIONS -------------------------------------------------------------- 4
∫EXPLANATIONS AND SYMBOLS, CAUTIONS AND WARNINGS ---------- 6
∫IMPORTANT SAFETY WARNINGS -------------------------------------------- 8
∫PRODUCT DESCRIPTION AND IDENTIFICATIONS ------------------------ 18
∫ASSEMBLY AND OPERATING INSTRUCTIONS -----------------------------19
∫CARE AND CLEANING ------------------------------------------------------- 30
∫TROUBLE SHOOTING -------------------------------------------------------- 31
∫DECLARATION OF CONFORMITY / PERFORMANCE -------------------- 33
∫ENVIRONMENTAL INFORMATION ------------------------------------------34
∫GUARANTEE -------------------------------------------------------------------35
∫CUSTOMER SUPPORT ------------------------------------------------------- 35

3
www.coreservice.co.uk
Hotline: [phone]
Email [email protected]
WHAT'S IN THE BOX
Grass Trimmer
Battery pack Charger Protection guard Auxiliary handle
If you do not have all these items, please contact:
www.coreservice.co.uk
Hotline: [phone]
Email [email protected]

4
www.coreservice.co.uk
Hotline: [phone]
Email [email protected]
SPECIFICATION
Technical Data
Model ST1904-2
Nominal voltage of product with battery 18V d.c./2.0Ah Li-ion
No-load cutting speed 8000 /min
Cutting width 26cm
Line diameter 1.6mm
Line length 6m
Net weight approx. 2.2 kg
Measured sound pressure level 81.3 dB(A), K=3.0 dB(A)
Guaranteed sound power level 96 dB(A)
Vibrations <2.5 m/s²; K=1.5 m/s²
Battery pack Model B0P-SP07-18ZM
Battery capacity 2.0Ah
Battery charging time Max. 50mins
Battery charger Model B0Q-SP06-20ZB
Battery charger input 220-240V AC, 50/60Hz 65W
Battery charger output 20V d.c. 2.4A
Protection class of charger class II /
Note: The above specifications are the MAXIMUM capacities of the tool. Voltage measured
without workload. Initial battery voltage reaches 20 Volts. Nominal voltage is 18 Volts.
The sound values have been determined according to noise test code given in EN 786, using the
basic standards EN ISO 11201 and EN ISO 3744.
TOOLS REQUIRED

5
www.coreservice.co.uk
Hotline: [phone]
Email [email protected]
The sound intensity level for the operator may exceed 80 dB(A) and ear protection measures are
necessary.
The declared vibration value has been measured in accordance with a standard test method (according
to EN 786) and may be used for comparing one product with another. The declared vibration value
may also be used in a preliminary assessment of exposure.
WARNING!
Depending on the actual use of the product the vibration values can differ from the declared total!
Adopt proper measures to protect yourself against vibration exposures! Take the whole work process
including times the product is running under no load or switched off into consideration!
Proper measures include among others regular maintenance and care of the product and cutting
attachments, keeping hands warm, periodical breaks and proper planning of work processes!

6
www.coreservice.co.uk
Hotline: [phone]
Email [email protected]
EXPLANATIONS AND SYMBOLS, CAUTIONS AND WARNINGS
This symbol indicates that there is a danger of serious personal injury
or death if you do not observe the warning.
To reduce the risk of injury, user must read instruction manual carefully.
Wear eye protection.
Wear ear protection.
Do not expose to rain.
96
Guaranteed sound power level.
Remove the battery pack before adjusting, cleaning or maintenance,
and before leaving the machine unattended for any period.
Objects thrown by the line trimmer could hit the user or other bystanders.
Keep bystanders away.
o
063
Keep other people out of working area during operation. A distance of at least 15 m
must be observed.
Do not dispose of batteries in rivers or immerse in water.

7
www.coreservice.co.uk
Hotline: [phone]
Email [email protected]
max. 45
Do not subject the battery to strong sunlight over long periods and do not leave it on
a heater (max.45ºC).
Do not dispose of batteries in a fire. They will explode and cause injury.
Li-I on
Li-Ion battery This product has been marked with a symbol relating to ‘separate
collection’ for all battery packs and battery pack. It will then be recycled or dismantled
in order to reduce the impact on the environment. Battery packs can be hazardous for
the environment and for human health since they contain hazardous substances.
WEEE symbol. Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local authority or local
store for recycling guidelines
Double insulation (Only for charger)
The charger is for indoor use only.
T 3.15A Fuse
The product complies with the applicable European directives and an evaluation
method of conformity for these directives was done.
UK Conformity Assessed

8
www.coreservice.co.uk
Hotline: [phone]
Email [email protected]
IMPORTANT SAFETY WARNINGS
General Safety Instructions
Warning: Please read the following instructions carefully,
failure to do so could lead to serious personal injury. When
using the electric grass trimmer, basic safety precautions,
including the following, should always be followed to reduce
the risk of fire,electric shock and personal injury. Read all
these instructions before operating this product and save
these instructions.
Become familiar with the owner’s manual before attempting
to operate this machine.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure that they do not play
with the appliance.
• The appliance is only to be used with the power supply unit
provided with the appliance.
Important! Read carefully before use, keep for further
reference.
Training
• Read the instructions carefully. Be familiar with the controls and
the proper use of the equipment.

9
www.coreservice.co.uk
Hotline: [phone]
Email [email protected]
• Never allow children, persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge or
people unfamiliar with these instructions to use the machine,
local regulations may restrict the age of the operator.
• Never operate the machine while people, especially children, or
pets are nearby.
• Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their property.
Preparation
• While trimming, always wear substantial footwear and long
trousers. Do not operate the equipment when barefoot or
wearing open sandals.
• Thoroughly inspect the area where the equipment is to be used
and remove all objects which can be thrown by the machine.
• Before use, always visually inspect the machine for damaged,
missing or misplaced guards or shields.
• Ensure the switch is in the off position before inserting the
battery pack. Inserting the battery pack into a machine that is
switched on can result in injury.
• Never operate the machine while people, especially children, or
pets are nearby.
Product Safety Warnings
General Operation
• Use the tool only with specifically designated battery packs. Use
of any other battery packs will increase the risk of injury and fire.
• Only operate the product in daylight or in good artificial light.
• Do not expose tool and charger to rain or wet conditions. If a
tool or charger is exposed to moisture it will increase the risk of
electric shock, battery damage, fire or explosion.

10
www.coreservice.co.uk
Hotline: [phone]
Email [email protected]
• Wear eye protection, long trousers and stout shoes at all times
while operating the machine.
• Avoid using the machine in bad weather conditions especially
when there is a risk of lightning.
• Never operate the machine with damaged guards or shields or
without guards or shields in place.
• Switch on the motor only when the hands and feet are away
from the cutting means.
• Take care against injury to feet and hands from the cutting
means.
• Always ensure that the ventilation openings are kept clear of
debris.
• Never fit metal cutting elements.
• Always be sure of your footing on slopes.
• Walk, never run.
• Do not overreach and keep the balance at all times.
• Do not touch moving hazardous parts before removing the
battery pack from the machine and the moving hazardous parts
have come to a complete stop.
• Do not transport the product while the rotating parts are running.
• Stop the product and remove the battery pack from the machine
and make sure that all moving parts have come to a complete
stop:
∂Whenever you leave the product unattended.
∂Before clearing blockages or unclogging chute.
∂Before checking, cleaning or working on the product.
∂After striking a foreign object. Make sure to inspect the
product for damage and make repairs before restarting and
operating the product.
∂Whenever the machine starts vibrating abnormally.