HCC USB ISP1161 User manual

USB ISP1161 Host Controller User Guide
Copyright HCC Embedded 2017 1 www.hcc-embedded.com
USB ISP1161 Host
Controller User Guide
Version 1.10
For use with USBH ISP1161 Host Controller versions
2.01 and above
Date: 19-Jun-2017 17:03
All rights reserved. This document and the associated software are the sole property of HCC
Embedded. Reproduction or duplication by any means of any portion of this document without the
prior written consent of HCC Embedded is expressly forbidden.
HCC Embedded reserves the right to make changes to this document and to the related software at
any time and without notice. The information in this document has been carefully checked for its
accuracy; however, HCC Embedded makes no warranty relating to the correctness of this document.

USB ISP1161 Host Controller User Guide
Copyright HCC Embedded 2017 2 www.hcc-embedded.com
Table of Contents
System Overview ______________________________________________________________________ 3
Introduction _________________________________________________________________________ 3
Feature Check _______________________________________________________________________ 4
Packages and Documents ______________________________________________________________ 5
Packages ________________________________________________________________________ 5
Documents ______________________________________________________________________ 5
Change History ______________________________________________________________________ 6
Source File List ________________________________________________________________________ 7
API Header File ______________________________________________________________________ 7
Configuration File ____________________________________________________________________ 7
Source Code ________________________________________________________________________ 7
Version File _________________________________________________________________________ 8
Platform Support Package (PSP) Files ____________________________________________________ 8
Configuration Options ___________________________________________________________________ 9
Starting the Host Controller _____________________________________________________________ 10
usbh_isp_hc _______________________________________________________________________ 10
Host Controller Task _________________________________________________________________ 10
Code Example ______________________________________________________________________ 11
Integration ___________________________________________________________________________ 12
OS Abstraction Layer ________________________________________________________________ 12
PSP Porting ________________________________________________________________________ 13
isp_hwinit _______________________________________________________________________ 14

USB ISP1161 Host Controller User Guide
Copyright HCC Embedded 2017 3 www.hcc-embedded.com
1 System Overview
1.1 Introduction
This guide is for those who want to implement HCC Embedded's USB host stack with NXP Semiconductors'
ISP1161 and ISP1161A1 USB host controllers.
The module provides a high speed USB 2.0 host controller which provides both full and low speed USB
functions. The controller can handle all USB transfer types and, in conjunction with the USB host stack, can
be used with any USB class driver.
The position of the host controller within the USB stack is shown below:

USB ISP1161 Host Controller User Guide
Copyright HCC Embedded 2017 4 www.hcc-embedded.com
1.2 Feature Check
The main features of the host controller are the following:
Conforms to the HCC Advanced Embedded Framework.
Designed for integration with both RTOS and non-RTOS based systems.
Integrated with the HCC USB Host stack and all its class drivers.
Supports NXP Semiconductor ISP1161 and ISP1161A1 USB host controllers.
Supports multiple simultaneous ISP1161 host controllers, each with multiple devices attached.
Spports all USB transfer types: control, bulk, interrupt, and isochronous.

USB ISP1161 Host Controller User Guide
Copyright HCC Embedded 2017 5 www.hcc-embedded.com
1.3 Packages and Documents
Packages
The table below lists the packages that you need in order to use this module:
Package Description
hcc_base_doc This contains the two guides that will help you get started.
usbh_base The USB host base package. This is the framework used by USB class drivers to
communicate over USB using a specific USB host controller package.
usbh_drv_isp1161 The USB host controller package described by this document.
Documents
For an overview of HCC's embedded USB stacks, see on the main HCC website.Product Information
Readers should note the points in the on the HCC documentation website.HCC Documentation Guidelines
HCC Firmware Quick Start Guide
This document describes how to install packages provided by HCC in the target development environment.
Also follow the when HCC provides package updates. Quick Start Guide
HCC Source Tree Guide
This document describes the HCC source tree. It gives an overview of the system to make clear the logic
behind its organization.
HCC USB Host Base System User Guide
This document defines the USB host base system upon which the complete USB stack is built.
HCC USB ISP1161 Host Controller User Guide
This is this document.

USB ISP1161 Host Controller User Guide
Copyright HCC Embedded 2017 6 www.hcc-embedded.com
1.4 Change History
This section describes past changes to this manual.
To view or download earlier manuals, see .Archive: USB ISP1161 Host Controller User Guide
For the history of changes made to the package code itself, see .History: usbh_drv_isp1161
The current version of this manual is 1.10. The full list of versions is as follows:
Manual
version Date Software version Reason for change
1.10 2017-06-19 2.01 New format. Change History
1.00 2015-12-22 2.00 First release.

USB ISP1161 Host Controller User Guide
Copyright HCC Embedded 2017 7 www.hcc-embedded.com
2 Source File List
This section describes all the source code files included in the system. These files follow the HCC
Embedded standard source tree system, described in the . All references to file HCC Source Tree Guide
pathnames refer to locations within this standard source tree, not within the package you initially receive.
Note: Do not modify any of these files except the configuration file and PSP files.
2.1 API Header File
The file is the only file that should be included by an application using thissrc/api/api_usbh_isp1161.h
module. It declares the function. For details, see .usbh_isp_hc() Starting the Host Controller
2.2 Configuration File
The file contains all the configurable parameters. Configure these assrc/config/config_usbh_isp1161.h
required. For details, see .Configuration Options
2.3 Source Code
The source code files are in the directory .src/usb-host/usb-driver/isp1161 These files should only be
.modified by HCC
File Description
isp1161.c Source file for ISP1161 code.
isp1161.h Header file for ISP1161 public functions.
isp1161_hc.c Source file for the ISP1161 HC descriptor.
isp1161_hc.h HC descriptor header file.
isp1161_hub.c Source file for public hub functions.
isp1161_hub.h Header file for public hub functions.
isp1161_reg.h Header file for ISP1161 registers.
isp1161_rw.c Source code for functions including read/write.
isp1161_rw.h Header file for functions including read/write.

USB ISP1161 Host Controller User Guide
Copyright HCC Embedded 2017 8 www.hcc-embedded.com
2.4 Version File
The file contains the version number of this module. This version numbersrc/version/ver_usbh_isp1161.h
is checked by all modules that use this module to ensure system consistency over upgrades.
2.5 Platform Support Package (PSP) Files
These files are in the directory named . These provide functions and elementssrc/psp/target/usbh-isp-port
the core code may need to use.
Note: These are PSP implementations for the specific microcontroller and board; you may need to
modify these to work with a different microcontroller and/or development board. See forPSP Porting
details.
The files are as follows:
File Description
isp_port.c Source code of the function.isp_hwinit()
isp_port.h Header file.

USB ISP1161 Host Controller User Guide
Copyright HCC Embedded 2017 9 www.hcc-embedded.com
3 Configuration Options
Set the following system configuration options in the file .src/config/config_usbh_isp1161.h
Note: For full details of these options, refer to the manufacturer's manual for the device.
ISP_MAX_PORTS
The maximum number of ports in ISP1161. The default is 2.
MAX_DEVICE
The maximum number of devices supported. The default is 2.
MAX_EP
The maximum number of endpoints; the total of bulk, isochronous, and interrupt endpoints. The default is 4.
ISP_MAX_TRANSFER_SIZE
The maximum number of bytes one endpoint can send with one TX/RX call. The default is 1023.
ISP_BUF_SIZE
The buffer size. The default is 4096.
ISP_ATL_BUF_SIZE
The ATL buffer size. The default is 4096.
ISP_ITL_BUF_SIZE
The ITL buffer size. The default is 0.
ISP_MAX_TRANSFERS
The default is 8.
ISP_HOST_ISR
The VIC number of EINT2 in LPC2292. The default is VIC_EINT0.
ISP_HOST_INT_PRIO
The interrupt priority. The default is 0.

USB ISP1161 Host Controller User Guide
Copyright HCC Embedded 2017 10 www.hcc-embedded.com
4 Starting the Host Controller
This section shows how to start the host controller and describes the task created. It includes a code
example.
4.1 usbh_isp_hc
This external interface function provides the host controller descriptor required by the usbh_hc_init()
function.
Format
extern void * const usbh_isp_hc
4.2 Host Controller Task
The host controller task handles all completed transfers. Callback requested for the transfer is executed
from this task.
The task has the following attributes:
Attribute Description
Entry point usbh_isp_transfer_task
Priority USBH_TRANSFER_TASK_PRIORITY
Stack size USBH_ISP_TASK_STACK_SIZE. The default is 4096.