Uplift Desk CHR467 User manual

1
Flex Chair (set of 2)
CHR467
Package Contents
M6 x 20 Screw
qty 12 (6 per chair)
Seat
qty 2 Base
qty 2 5mm Allen Wrench
Chair Assembly
A. Place one chair Seat upside down on the edge of a table
and place a Base on top of the Seat as shown.
B. Align the six attachment holes in the Base and Seat,
then insert one M6 x 20mm Screw into each hole.
C. Tighten each screw with a 5mm Allen Wrench and place
the chair upright on the oor.
D. Repeat this process for additional chairs.
Interlock Chairs (optional)
Chairs can be interlocked to keep them aligned and
to create rows that are even and consistently spaced.
To interlock chairs:
A. Place the chairs side by side.
B. While standing behind two chairs, lift the left chair and
place its right-side legs over the top of the left-side legs
of the other.
C. Continue to add chairs to the row in this way.
To Separate Interlocked Chairs:
A. While standing behind the rst chair at the left end of
the row, lift the chair to the left up and off the legs of
the chair to the right.
B. Continue to separate chairs.
Note: Chairs are recommended primarily for indoor use but can be used outdoors for short periods.

AI-CHR467-1.4
SAVE THE INSTRUCTIONS
Study this manual carefully. If this product is sold, please provide this
manual to the buyer, installers, or support personnel operating the product.
Work Better. Live Healthier
Copyright Notice: This guide is a component of this UPLIFT Desk product. This guide is a part of
the scope of delivery, even if the item is resold. This guide is also available on the UPLIFT Desk
website: upliftdesk.com. These specications are subject to United States copyright law.
©
upliftdesk.com
[email protected]
800-349-3839
512-614-3152
Storing Chairs
When not in use, the chairs can be stacked directly
on top of one another. We recommend stacking no
more than 10 chairs at a time.
Stacks of chairs can be moved easily using the Flex
Chair Dolly (ACC074).
Safety and Warnings
CAUTION: Read all instructions before assembly. Failure to assemble or operate properly may result in damage or
personal injury. Retain manual for future reference.
WARNING: This product’s maximum weight capacity is 297.6 lb (135 kg). DO NOT exceed the maximum weight
capacity.
!
!