Seville Classics 05122 User manual

Step 6:
Slide the Shallow Wire Basket (G) onto
the top sidebars and Deep Wire Basket
(H) onto the bottom sidebars. And place
Inlays (I) on the shelf and the wire
baskets.
STACKING:
Assemble a second unit. Instead of screwing the leveling feet, screw the
Stacking Connectors (J) into the bottom of each pole. Remove pole
caps from the first unit. Then carefully install the second unit on all four
of the poles.
WARNING:
• EACH BASKET HOLDS 5 LB (2.2 KG) EVENLY DISTRIBUTED.
• THE SHELF HOLDS 15 LB (6.8 KG) EVENLY DISTRIBUTED.
Rev. 07/13
DOUBLE BASKET ORGANIZER
Model No. 05122
ASSEMBLY INSTRUCTIONS
Customer Service
Tel [phone]
Tel [phone]
Fax [phone]
Monday through Friday 8:30 am - 4:30 pm (Pacific Time)
Seville Classics, Inc.
Torrance, CA 90501 USA
www.sevilleclassics.com
Please read and save these instructions
©2013 Seville Classics, Inc.

Please make sure you have all the parts before assembly
A
4 pcs
B
4 pcs
C
16 pairs
D
2 pcs
Poles
Leveling Feet
Slip Sleeves
Cross Bars
E
2 pairs
F
1 pc
G
1 pc
H
1 pc
Sidebars
Shelf
Shallow Wire Basket
DeepWireBasket
I
3 pcs
J
4 pcs
Inlays
Stacking Connectors
Step 1:
Screw the Leveling Feet (B) into the
bottom of each Pole (A).
Step 2:
Starting at the bottom, fasten a pair of Slip Sleeves (C) around the
groove of each pole. If necessary, move the sleeves slightly up or down
until it snaps into position.
Step 3:
Slide Cross Bars (D) over the front and back poles and push
down firmly.
Step 4:
Place slip sleeves around the grooves of the poles and slide the
Sidebars (E) on each side of the poles. Repeat for the second
pair of sidebars.
NOTE: The drawer glides on sidebars face inward to support wire
baskets.
Step 5:
Fasten slip sleeves at the top grooves of the
poles and slide Shelf (F) over the poles.