Health Mate HM-8200 User manual

1
User manual 4D massage chair HM-8200
Remote control
On/Off: Press the on/off button to start the massage chair; the massage chair will
now place itself in standby mode. Select an automatic or manual massage program
from the menu; the massage device will first detect the shoulder height and then
start the massage. To turn the chair off, press the on/off button again, the massage
chair will now turn off and return to its original position. The control panel will shut
down in 3-5 seconds.
Menu: It is possible to set and view all the massages using the menu button. Some
settings can also be adjusted here. This includes the air cushions, foot roller, time of
the desired massage and language; there is also a stop function to stop the chosen
massage. The user can choose between all the different massage functions here.
Press this button again to return to the home page.
Timer: The standard massage time is set to 20 minutes. The duration of the massage
can be adjusted in 10-minute increments by pressing this button. The time at the top
right will change each time this button is pressed. When the time is up, the massage
chair will turn itself off and return to its original position.
Hot rocks: Press this button to start the “Quick relax program”. This is a massage
program lasting eight minutes. Press again to stop the massage.
Navigation: The direction button has four options: up, down, left and right. The menu
button allows the user to press up or down to choose a massage. The user presses
left or right to access the previous or next menu. The up and down button can also be
used to adjust the massage position in acupuncture point tracking. When being used
as music controls, the left and right buttons skip to the previous and next track. The
up and down buttons adjust the volume. The volume increases by one bar every two
times the button is pressed.
OK: Press the OK button to confirm the menu selection and move to the next menu.
Reducing the angle of the backrest: Pressing this button will decrease the angle of
the backrest. When the button is released, both the backrest and the leg support will
stop moving. The text, “Chair posture adjusting…” will appear on the controller

2
display while the massage chair position is adjusting. The massage must be in
progress before this function can be used.
Increasing the angle of the backrest: Pressing this button will increase the angle of
the backrest. When the button is released, both the backrest and the leg support will
stop moving. The text, “Chair posture adjusting…” will appear on the controller
display while the massage chair position is adjusting. The massage must be in
progress before this function can be used.
Lifting the leg support: Pressing this button will lift the leg support.
The leg support will stop moving when the button is no longer being pressed. The
text, “Chair posture adjusting…” will appear on the controller display while the
massage chair position is adjusting. The massage must be in progress before this
function can be used.
Lowering the leg support: Pressing this button will lower the leg support. The leg
support will stop moving when the button is no longer being pressed. The text, “Chair
posture adjusting…” will appear on the controller display while the massage chair
position is adjusting. The massage must be in progress before this function can be
used.
4D- and 4D+: This button can be used during a manual massage to increase or
decrease the intensity of the massage. The start screen displays stripes behind the
icon to denote the number of times it has been pressed.
Air intensity: Press this button to increase or decrease the intensity of the air
cushions after selecting an automatic massage. The start screen displays stripes
behind “Intensity” to denote the number of times it has been pressed.
Roller: This button adjusts the force with which the foot unit massages. Pressing this
button once will provide a softer massage, pressing it again will stop the massage.
Automatic mode: Pressing this button will cause the massage chair to start one of
the six automatic massage functions, which can be seen at the top left. If this button
is pushed again, another automatic massage function will start. Keep pressing the
button until the desired automatic massage function appears at the top left of the
start screen. There are six automatic programs to choose between: “Soft”, “Power”,
“Stretch”, “Vitality”, “Normal” and “Sports”. There is also the “Special” that has six

3
extra massage functions, namely “Therapy”, “Recovery”, “Relaxation”, “Healing”,
“Sleeping” and “Slimming”.
Manual mode: After switching the massage chair on, press this button to select a
manual program. Pressing the button will cause the selected manual program to
appear at the top of the start screen. Press again to go to the next program. The
choices offered are “Kneading”, “Knocking”, “Tapping”, “Kneading & knocking” and
“Shiatsu”.
Air massage: In addition to the manual and automatic programs, there is a choice of
four different air pressure massages. The choices offered are “Full Body”, “Shoulder
& arm”, “Lower back & seat” and “Leg & foot”.
Weightless position: The 4D massage chair has three weightlessness positions. Press
this button to place the massage chair in the level 1 weightlessness position. Press
this button again to move to the level 2 weightlessness position. Press a third time to
enter sleeping mode, and press a fourth time to return to the default position.

4
Extra information:
After the power has been applied, press the power button, a buzzer will beep once
shortly. The LCD screen will now appear, after 2-3 seconds it will show the home screen
and enter standby mode.
Pressing the menu button will enable management of all possible massage functions and
the settings. To return to the home screen, press menu again.
Generation of negative ions: When the massage chair is switched on, press the “OK”
button to turn on the air filter function. A green leaf will appear on the home screen of
the remote control.
Automatic massage: The 4D massage chair has a shortcut to all the different automatic
massages. This can be found at the bottom left. Press one of the buttons to start an
automatic program. Press again to go to the next automatic program. The desired
program will appear at the top left of the screen.
An automatic program can be selected using the menu button. The cursor will be on the
“Automatic massage” function as standard. Press the OK button to go to the automatic
mode. There are six programs to choose from: “Soft”, “Power”, “Stretch”, “Vitality”,
“Normal” and “Sports”. There is also the “Special”, which consists of six additional
automatic massage programs.
After the power has been applied, the massage chair will detect the acupuncture point
position the first time the automatic program is used. “Acupuncture point tracking…” will
be displayed on the screen at this time. After acupuncture point tracking is complete, the
buzzer will sound five times (once per second); meanwhile, the massage chair will be
detecting the shoulder position. If the user thinks the position is incorrect, the up/down
navigation button can be used to adjust it. “Acupuncture point adjusting…” will be
displayed on the screen at this time. Note: this can only be adjusted for automatic
massages.
Manual massage: The 4D massage chair has a shortcut to all the different manual
massages. This can be found at the bottom left. Press to start a manual program. Press
again to go to the next manual program. The desired program will appear at the top left
of the screen.
A manual program can also be selected using the menu button. Select “Manual” using
the navigation button, press the OK button. There are five options: “Mode”, “Position”,
“Width”, “Speed”, “4D” and “Footrest”. Select the desired function, then press the OK
button to open the next menu. Select the desired massage or go back to the overview
using the left arrow of the navigation button. If the user starts a manual massage,
pressing the menu button will return the user to the home screen. The user can now use
the up/down button to adjust the massage position. Information such as “Massage
position adjusting…” will be displayed on the display screen.

5
Note:
1. Overall: When choosing a full massage, the shoulder height detection process will
only be performed once.
2. Partial or point: The “Partial” and “Fixed point” massages do not require shoulder
height detection, choosing a different massage will cause a shoulder height detection
to be performed.
Air pressure: press the menu button, select “Airbag” via the navigation, then press the
OK button. You can choose between two types of air pressure functions: “Position” and
“Intensity”. Select the desired function, press the OK button to see the next menu, and
select the desired function again.
Roller: press the menu button on the remote control, choose “Roller”. There are three
options to choose from: “Level 2”, “Level 1” and “Stop”.
Warmth: press the menu button, select “Heating” using the navigation, and then press
“Back ON” to switch on the back heating. The foot heating can also be switched on in the
same way. When the heat is activated, a thermometer will be displayed at the top right
of the home screen. The intensity of the heat can be chosen here.
Speech recognition function: The speech recognition sensor is attached on the left at ear
level. Choose from the “User’s voice commands” below to have the massage chair
perform the selected functions.
Settings: press the menu button, select “Settings” and then choose the time (timer) or
language (language)
Timer: choose the desired duration of the massage: 10 min, 20 min, 30 min or
50 min, when the time is up, the power will turn off automatically
Language: English, Dutch and French are available
Stop button: When this button is pressed, the massage will stop immediately.
Voice Recognition Application Operation Method User's Voice Commands Massage Chair Voice Reply
To activate voice recognition Turn on speech recognition mode Speech recognition has been opened
To deactivate voice recognition Voice Off Voice recognition mode is off
To shut down massage function Massage chair shutdown Massage chair is powering off
To start Chinese massage Chinese Massage Chinese Massage has been opened for you
To activate pain relief Pain Relief Pain relief has been opened for you
To activate stretching mode Body Stretch Body Stretch has been opened for you
To activate experience mode Experience Experience has been opened for you
To activate relaxation mode Relaxation Relaxation has been opened for you
Voice Recognition Function To activate zero gravity mode Zero Gravity Start Zero Gravity Start
Voice Recognition Function