Heat & Glo RH-42 Series User manual

Royal Hearth
Woodburning Fireplace

Royal Hearth Standard Features
• Seamless clean face design
• Realistic masonry-like refractory
• Easy-to-operate damper
• Neat-and-clean ash lip
• Scratch-resistant powder coated finish
• Unique fire grate
• Safety firescreen
• Performance-enhancing outside air kit
• Conversion-friendly dual gas knockouts
• UL tested for safety
Venting Specifications
Use of the Heat & Glo SL 300 Series Chimney
components required.
Options
• 4" Insulated Flex Duct - ID4
• 4" Uninsulated Flex Duct - UD4
• Chimney Air Kit - CAK4A
• Mantels & Surrounds
• Bifold glass doors available in 3 finishes
• Many gas log options available including Briarwood,
Charwood,Versawood, Mistwood and Realwood
Limited Lifetime Warranty
Covered by Heat & Glo 20-year Buyer Protection Plan.
Royal Hearth Specifications
Framing
Top View
Front ViewSide View Side View
Drawings below represent the RH-36 and RH-42 combined.
HNG-1043U-1206
20802 Kensington Boulevard, Lakeville, MN 55044
[phone] [phone]
Email: [e-mail] • Web: heatnglo.com
A brand of Hearth & Home Technologies, Inc.
Dimensions above are in inches. Reference dimensions only. We recommend measuring individual units at installation. Assumes the use of 1/2" drywall. NOTE: Non-combustible
material is allowed over this dimension. Make sure you do NOT cover the decorative door opening.
Refer to installation manual for detailed specifications on installing this product. Heat & Glo reserves the right to update units periodically. The flame and ember appearance may
vary based on the type of fuel burned and the venting configuration used. Pictures in this brochure are not true representation of the fireplace finish and/or flames.
Cover Photo: RH-36 shown with Fairfield mantel and green granite.
A clean face, radiant heating fireplace with a generous hearth and tall viewing height.
MODEL HEIGHT FRONT WIDTH BACK WIDTH DEPTH GLASS SIZE
RH-36
Actual Framing Actual Framing Actual Framing Actual Framing
21 x 36
39-1/2 40-1/4 41 42 23-3/4 42 21-3/8 21-1/2
RH-42 39-1/2 40-1/4 47 48 29-3/4 48 21-3/8 21-1/2 21 x 42
DM1036