Heat Surge Transformer Media Center User manual

Transformer Media Center
Assembly Instructions
Contains the following parts (Roll-n-Glow Fireplace Not Included):
Base•
MediaCenterTop•
LeftSidePanel•
RightSidePanel•
Step 2:
Placetherightsidepanelwithtwodow-
elsonbottomintorightsideofthebase
aspictured.
Step 1:
Placethebasewhereyouwouldlikethemediacenter.
Theholesinthebasesideshouldbevisibleandplaced
towardstheback.Allow1"spacebetweenthebackofthe
baseandthewall.
Continues on back

©2011 HS M4309A MS14772R-1
Step 3:
RepeatStep2fortheleftsidepanel.
Step 5:
Placethetopontothesidepanelsandfire-
placebyaligningholesonthebottom/back
topofdowel.
Step 4:
LifttheRoll-n-Glowfireplaceontothebase
makingsurethatthewheelsareentirely
insidebase.Movetheleftsidepaneland
rightsidepaneltightagainstthefireplace.
Step 6:
Make sure all pieces are secure and
thenplaceTVandcomponentsontothe
TransformerMediaCenter.