WRIGHT 95470008 User manual

Installation Manual
FLAT PACK FIRE PIT
FAILURE TO FOLLOW SAFE OPERATING PRACTICES MAY RESULT IN SERIOUS INJURY OR DEATH.
Read this manual and other manuals that came with your PURCHASE before operating.
©1998-2023 Wright Manufacturing, Inc. All rights reserved. This material may not be reproduced or copied, in whole or part, without written permission
from Wright Manufacturing, Inc. Grass Gobbler, Gobbler, Leaf Gobbler, Velke, Pro 1, X2, Stander, and Sentar are trademarks of Wright Manufacturing.
For Kit 95470008
Revised November 2022

1- Installation
1-21-2
1. Conrm the items below are provided:
ID DESCRIPTION QTY
15/16-18 X 1.25” Carriage Bolt 2
25/16-18 Plastic “T” Nut 2
3Fire Pit Side, Slotted 3
4Fire Pit Side, Hooked 3
5Fire Pit Bottom, Hexagonal 1
3. Remove the “T” nuts and bolts to separate
the re pit components.
4. Find a at, inammable spot for your re
pit to rest and begin by assembling one
hooked side to one slotted side.
5. Continue assembly of the sides, alternating
between hooked and slotted, until you have
completed the hexagon.
6. Place the re pit bottom plate into the
bottom of the hexagon to complete the re
pit.
The owner/user can prevent and is
responsible for accidents, injuries
occurring to people, or damage to property.
Follow all local restrictions and regulations.
General information is provided with this kit
for reference
1-2

2-Safety
3
• Many communities require a minimum of
a 10-foot distance from your house and
neighbors’ yards
• Do not use on or near combustible
surfaces, such as a wood or plastic deck.
• Do not use in enclosed spaces due to
carbon monoxide and smoke inhalation risk.
• This product is intended as a wood burning
repit only. Do not use other combustible
materials such as plastic or rubber.
• Firepit is not suitable for large res. Wood
and kindling should not be stacked higher
than the rim of the re pit.
• Fire pits should not be placed directly
on concrete products as high heat can
adversely a󰀨ect the integrity of the product.
• Check wind direction before lighting a re.
• Don’t use ammable uids (gasoline, lighter
uid, etc.) to light or relight res.
• Don’t wear ammable clothing (like nylon)
or any loose-tting clothing.
• Keep children and pets at least three feet
away from the re.
• Keep a re extinguisher, garden hose or
bucket of water nearby.
• Be careful not to touch the steel while it’s
hot. It can still retain heat long after the re
has been extinguished.