Heatmiser Rc1-w1 User manual

1Model: RC1-W Model: RC1-W

2Wireless Receivers 2Model: RC1-W

Table of Contents

1

2

3-4

5

6-8

9-10

Product Image

Table of Contents

Installation Procedure

LED’s Explained

Wiring Diagrams

Notes

Model: RC1-W

Wireless Receivers1

43 Wireless Receivers Model: RC1-W

1

Installation Procedure

This receiver is designed to be ush mounted and requires a back box of 35mm

(minimum depth) to be sunk into the wall prior to installation.

Step 1

Carefully separate the front half of the receiver from the back plate by placing a

small at head terminal driver into the slots on the bottom face of the receiver.

Step 2

Place the receiver front somewhere safe.

Terminate the receiver as shown in the diagrams on pages 6-9 of this booklet.

Step 3

Screw the receiver back plate securely into the back box.

Step 4

Clip the front of the receiver back onto the receiver back plate.

2

3 4

Please read the instructions fully so you get the best from our product.

65 Wireless Receivers Model: RC1-W

LED Status

Power Switch

Pairing Button

There are 4 LED lights on the receiver.

Each LED is labeled and will light up or ash during setup and operation.

Please refer to your thermostats instructions for LED status information.

Comms LED

Wiring Diagram - RC1-W

Two Zone Heating System

230VAC

RC1-W

B1 A2 A1

B2 N L

P/L and S/L connections will vary

depending on the boiler model but

will normally be connected to the

thermostat connections.

N.B Valves must have end switches

Two Zone Heating System

N

L

N

L

Mains Supply In

Heating Zone 2 Valve

Heating Zone 1 Valve

P/L

To Boiler

S/L

N

L

Neutral

*

= Neutral

*

87 Wireless Receivers Model: RC1-W

Wiring Diagram - RC1-W

One Heating Zone & One Hot Water Zone System

Wiring Diagram - RC1-W

Combination Boiler System

230VAC

RC1-W

B1 A2 A1

B2 N L

P/L and S/L connections will vary

depending on the boiler model but

will normally be connected to the

thermostat connections.

N.B Valves must have end switches

N

L

N

L

Mains Supply In

Hot Water Valve

Heating Zone 1 Valve

P/L

To Boiler

S/L

N

L

Neutral

*

= Neutral

*

To Boiler

N

S/L P/L

L

Mains Supply In

S/L = Switched Live

P/L = Permanent Live

P/L and S/L connections

will vary depending on the

boiler model but will normally

be connected to the

thermostat connections.

230VAC

RC1-W

B1 A2 A1

B2 N L

109 Wireless Receivers Model: RC1-W

Notes

.........................................................................................................................................................................

Wiring Diagram - RC1-W With Mid Position Valve

230VAC

RC1-W

B1 A2 A1

B2 N L

Neutral

Cylinder

Stat Mid Position

Valve

Hot Water OFF

Hot Water ON

Heating ON

NC

NO

C

*230V Single Relay Required, Not Supplied

Supply In

85-230V AC

Live

230V Single Relay*

Grey

Orange

White

11 Wireless Receivers

Twitter: heatmiseruk

Facebook:

facebook.com/thermostats

Want More Information?

Call our support team on: +44 (0)1254 669090

Or view technical specications directly on our website:

www.heatmiser.com

PDF FAQ

Heating Professionals:

Request a copy of our product

installation guide containing

detailed technical specications

for our complete product range:

www.heatmiser.com/guide

Heatmiser RC1-W1 User manual

Popular Receiver manuals by other brands