Heatmiser TM4-TS User manual

Model: TM4-TS

1
Time Clock Series
Model: TM4-TS

Table of Contents
1
2
3-4
5-6
7
8
9
10
11
12
13
13
14
Product Image
Table of Contents
Installation Procedure
LCD Display
Normal Run Mode
Setting the Clock
Holiday
Selecting 5/2 Day or 7 Day Programming
Adjusting the Switching Times
Copy Function
Mode Select
Boost Facility
Wiring Diagram
Model: TM4-TS
2

3
Time Clock Series
Installation Procedure
This time clock is designed to be flush mounted and requires a back box of 35mm
(minimum depth) to be sunk into the wall prior to installation.
Step 1
Carefully separate the front half of the time clock from the back plate by placing a
small flat head terminal driver into the slots on the bottom face of the time clock.
Step 2
Place the front of the time clock somewhere safe.
Terminate the time clock as shown on the wiring diagram on page 14 of this booklet.
Step 3
Screw the time clock back plate securely into the back box.
Step 4
Clip the front of the time clock on to the back plate.
Do
Mount the time clock at eye level.
Read the instructions fully so you get the best from our product..
Don’t
Do not install near to a direct heat source as this will affect functionality.
Do not push hard on the LCD screen as this may cause irreparable damage.

Model: TM4-TS
4
1 2
34

5
Time Clock Series
1 2
7
4
5
6
8
10
12
9
3
11
5 Time Clock Series

Model: TM4-TS
6
1. Day Indicator - Displays the day.
2. Copy - Enables copying of switching times from one zone to another.
3.
4. Timer Status - Displays the current status of the timed output.
5. Up/Down Keys - Increase or decrease values shown on left digit group.
6. Up/Down Keys - Increase or decrease values shown on right digit group.
7. Select Zone - Prompts a zone selection.
8. Boost Left/Holiday Left - Displays the remaining duration of a timed boost
or holiday setting.
9.
operations.
10. Setup/Programming Keys - Used to navigate setup options.
11.
12.
LCD Display
12
11
6Model: TM4

7
Time Clock Series
7 Time Clock Series
Normal Run Mode
In normal run mode, the time clock will display the current time. It can also be set to
show the status for a particular zone. To display the status of a zone, press
Zone 1 – Zone 4. This screen will be displayed until you press DONE and return to
the main menu.
Normal Run Mode Zone Selected

Model: TM4-TS
8
8Model: TM4
To set the clock, follow these steps:
• Press the Clock key .................................................................................................................
• Use the Left Up/Down keys to set the hour .......................................................
• Use the Right Up/Down arrow keys to set the minute ....................................
• Press the Day key to set the day ........................................................................................
• .........................................................................................
Setting the Clock
Adjust Hours
Adjust Minutes
Minutes
Adjust Day
Current Day
Hours

9
Time Clock Series
9 Time Clock Series
All four timed outputs will be disabled during a holiday period.
At the end of your holiday, the time clock will revert back to the programmed setting.
• Press HOLIDAY ..............................................................................................
• Enter the desired duration in days ........................................................
• .............................................................
To cancel a Holiday setting, reduce the holiday time to 00 days.
Holiday
Holiday Days
Note: A holiday period does not start until 00:00 the next day. For example, if you set a holiday
revert back to the programmed schedule at 00:00 on Monday.

Model: TM4-TS
10
10Model: TM4
Selecting 5/2 Day or 7 Day Programming
Each zone can be programmed to work in 5/2 (Weekday/Weekend) or 7 Day mode.
• Press ZONE 1 ...................................................................................................................
• Press Day ..........................................................................................................................
• Use the Up/Down arrow keys to set the programming mode ...........
00 = 5/2 Day mode, 01 = 7 Day mode
• ...............................................................................
In 5/2 Day mode the time clock will display
Mon > Fri prompting you to program the
switching times for the weekend.
In 7 Day mode, the time clock
will display Mon.

11
Time Clock Series
11 Time Clock Series
Adjusting the Switching Times
• Select the zone you wish to program, for example Zone 1 ................................
• Press EDIT ..............................................................................................................................
If the zone is operating in 5/2 day mode, you will see Mon, Tue, Wed, Thu, Fri
on the display. If it is operating in 7 day mode, you will see Mon.
• Press the Day key to select the day to program .....................................................
• Use the Up/Down arrow keys to set the on time .........................................
•
• ........................................
• Repeat for Time 2, 3 and 4 ......................................................................
• ...................................................................................

Model: TM4-TS
12
12Model: TM4
Copy Function
The Time clock has a copy function, enabling you to copy switching times from one
zone to another. To use the Copy function, follow these steps:
• Select the zone to copy from and press EDIT .........................................................
• Press the Copy key ...........................................................................................................
• Select each zone you want to copy to ...................................
• ..................................................................................
Copy Key

13
Time Clock Series
13 Time Clock Series
Boost Facility
Each zone has a boost facility allowing you to turn any of the zones on for a number
of hours. This is ideal for when you need to extend the time period but do not wish
to reprogram the time clock settings. To use the Boost facility, follow these steps:
• Select the zone ....................................................................................
• Press Boost ...............................................................................................................................
• Use the Up/Down arrow keys to enter the boost period (in hours) .........
• .......................................................................................
The remaining Boost time will be displayed on-screen.
To cancel the boost early, repeat the steps above reducing the boost time to 00.
Mode Select
Each zone can operate in 3 modes: Auto: The zone will work to the programmed switching
To set the mode for the zone, follow these steps:
• Select the zone you wish to program ..................................
• Press Mode until the desired mode is displayed ................................................
•

Model: TM4-TS
14
14Model: TM4
Each zone can operate in 3 modes: Auto: The zone will work to the programmed switching
Wiring Diagram - TM4-TS
NL
TM4-TS
CH1
CH2CH3CH4
230VAC
Neutral
Live
Switch Live CH1
Switch Live CH2
Switch Live CH3
Switch Live CH4

Want More Information?
PDF FAQ
Call our support team on: [phone]
Or view technical specifications directly on our website:
www.heatmiser.com
Twitter: @heatmiseruk Facebook: facebook.com/thermostats
Rev.2.1