HEB lighting RT2 User manual

RT2 RT7
● Apply to dual color(warm white + cool white) LED controller.
Ultra sensitive color adjustment touch wheel.●
● Each remote can match one or more receiver.
● AAAx2 b attery powered.
● Operate with LED indicator light.
User Manual Ver 1.0.6
Technical Parameters
Model No.: RT2/RT7
Features
Page 1
1 and 4 zone CCT/Touch color wheel/Wireless remote 30m distance/AAAx2 battery
Touch Wheel RF Remote Controller
RT2,RT7 Touch Wheel RF Remote Controller
LVDRED
1 Zone CCT 4 Zone CCT
Mechanical Structures and Installations
Operation
● When turn on light, the indicator display blue. when turn off light, the indicator display red.
● When touch the color wheel, the indicator will display the same color.
● When press or touch operation is invalid (If the light is off), the indicator display red.
● To extend battery life, no touch or press key operation after a few seconds,
the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.
Match Remote Control (two match ways)
Use the controller’s Match key
Match:
Short press match key, immediately press on/off
key (single zone remote) or zone key (multiple zone
remote) of the remote.
The LED indicator fast flash a few times
means match is successful.
Use Power Restart
Match:
Switch off the power, then switch on power again,
immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power, then switch on power again,
immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were
deleted.
Delete:
Press and hold match key for 5s to delete all match,
The LED indicator fast flash a few times
means all matched remotes were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:
Warranty
5 years
Warranty
Operation temperature
Environment
IP20
IP rating
Ta: -30
O
C ~ +55
O
C
Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Radio Equipment(RED) EN300 328
Certification CE,EMC,LVD,RED
EN60950
Safety standard(LVD)
Input and Output
Output signal RF 2.4GHz( )
Working voltage 3VDC AAAx2( )
Working current ＜5mA
Standby current ＜10μA
Standby time 1 year
Remote distance 30m(Barrier-free space)
Weight
0.048 k g
Gross weight
Net weight
0.088kg
53 .00 m m
12 2.0 0 m m
17 .50 m m
3VDC(AAAx2) Battery Back holder
To x the remote, two options are offered for selection:
Option 1: fix the remote' back holder on the wall with two screws.
Option 2: adhere the remote' back holder to the wall with paster.
58 .00 m m
33 .00 m m
53.00 mm
22 .00 m m

Safety information
1. Read all instructions carefully before you begin this installation.
2. When installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only.
User Manual Ver 1.0.6 Page 2
RT2,RT7 Touch Wheel RF Remote Controller
: Adjust brightness, short press 10 levels,
long press 1-6s for continuous 256 levels adjustment.
: Touch to change color temperature.
: Turn on/off light.
: Short press recall the scene,
long press 2s save current state into S1/2/3/4.
the LED indicator display green when save OK.
: 25%, 50%, 75%,100% brightness.
: Get warm white or cold white directly.
: Short press turn on/off all zone light.
: Short press select and turn on zone light,
long press 2s turn off zone light.
Short press multiple zone key fastly,
will select multiple zone synchronously.
: Touch to change current zone color temperature.
: Short press recall the scene,
long press 2s save current state into S1/2/3/4.
the LED indicator display green when save OK.
4 zone recall or save synchronously.
: Adjust brightness for current selected zone,
short press 10 levels,
long press 1-6s for continuous 256 levels adjustment.
: Get warm white or cold white directly for current selected zone.
● RT2 1 zone CCT remote
CWWW
S1S2S3S4
S1S2S3S4
CWWW
● RT7 4 zone CCT remote
CWWW
S1S2S3S4
124
3
S1S2S3S4
124
3
CWWW
Key function