S320+GeoSurveyor Mobile_NTRIP RTK Rover Connect Page 5 of 22
PN 874-0304-000 Rel. Jan 06, 2014
23.
Select GPS Rover > Receiver,
24.
Select Antenna model: HEMS320
25.
Enter Antenna Height: 2.000m
26.
DGPS Type: None
27.
If performing a RTK Rover survey >>
select DGPS Type: None, this tells the
GNSS receiver to be a RTK Rover, use
internal GSM Cellular modem, or internal
UHF/Spread Spectrum radio.
28.
Select/tap [Advanced ] menu bar,
29.
Advanced menu selections:
30.
[√]Use GLONASS
31.
Tap [√]Green Check Mark to continue,
32.
If connecting to Trimble VRS Now
Network, the User may need to configure
the Data Collector NMEA Output
menu,
set the NMEA, GGA message
output to
30-secs, or 10-secs, >>
depending on
VRS Now >> NMEA GGA
send Interval
requirements.
33.
Select GPS Rover > RTK menu,
34.
Device: Internal GSM
35.
Network: NTRIP
36.
Select/tap the Tools menu icon for the
Device: Internal GSM…
