Henderson 600852 User manual

Swing Door Magnet
FITTING INSRUCTIONS –NOTICE DE POSE –MONTAGE HANDLEIDING –MONTAGEANLEITUNG
ISTRUZIONI DI MONTAGGIO –INSTUCCIONES DE MONTAJE
Ø7 Drill bit
Electric Drill
Tape
measure
Pencil
Posi Screw
driver
Tools required
Content of Kit
1. Plate –Mark position including holes
Plate
Wall plugs
Anchor bolt
Ball
Screws
Cover
Cup
Inner
Spring
Screws
Exploded view
Assembled View
Door
10mm ring
Spanner
2.

Swing Door Magnet
FITTING INSRUCTIONS –NOTICE DE POSE –MONTAGE HANDLEIDING –MONTAGEANLEITUNG
ISTRUZIONI DI MONTAGGIO –INSTUCCIONES DE MONTAJE
3. Mark position on wall. Remove cover to mark
hole positions
4. Drill marked positions
5. Insert plugs into wall –tighten anchor bolt –locate body
NOTE: It is the installer’s responsibility to
ensure the wall insert supplied is suitable to be
used. Depend on wall type / quality