HERA DynamicController User manual

Montage- und Bedienungsanleitung Montage- und Bedienungsanleitung
®
®
Nachdruck auch auszugsweise verboten.
Hera GmbH & Co. KG
Dieselstraße 9
32130 Enger / Germany
Hera GmbH & Co. KG
Dieselstraße 9
32130 Enger / Germany
Hera WiFi Lichtsteuerungssystem Hera WiFi Lichtsteuerungssystem
Nachdruck auch auszugsweise verboten.
Typ 24V WiFi Controller 2 Dynamic Typ 24V WiFi Controller 2 Dynamic24 V DC max. 75W 24 V DC max. 75W
Montagemaße
22600250601 19.10.2021
Bestimmungsgemäße Verwendung
1. Die Montage und Demontage darf nur im spannungslosen Zustand durchgeführt werden!
2. Beim Austausch von defekten Teilen dürfen nur Originalteile verwendet werden.
3. Alle Steckverbindungen immer bis zum Anschlag einführen.
4. Anschluß nur an spezielle LED - Konverter Hera Typ LED 24/...W mit konstanter Ausgangsspannung
24 V DC und mit einer Ausgangsleistung von max. 200 W.
5. Werden andere als die angegebenen LED - Konverter eingesetzt, übernimmt Hera keine Gewähr-
leistung.
6. Die Gesamtbelastung darf die Transformatoren-Nennleistung nicht überschreiten.
7. Die Einbauabstände des Transformators müssen eingehalten werden.
WiFi Controller als Lichtsteuerungssystem zum Anschluss an Sicherheitstransformatoren LED 24/...W für ein-
stellbare Lichtfarben mit Dynamic LED Leuchten mittels iOS oder Android Smartphone oder Tablet über „Magic
Home Pro“ App; nur für den Betrieb im Innenbereich geeignet.
82
16
62
RST
Power
Link
RST
Power
Link
RST
Power
Link
8 sec
31
16,5
Apple Google
70
RST
Power
Link
82
16
62
RST
Power
Link
RST
Power
Link
RST
Power
Link
8 sec
31
16,5
Apple Google
70
RST
Power
Link
82
16
62
RST
Power
Link
RST
Power
Link
RST
Power
Link
8 sec
31
16,5
Apple Google
70
RST
Power
Link
Anzeige Power Link
Rote LED:
Betrieb
Grüne LED: Netzwerkbetrieb
beide LED 24-Stecker müssen in den Verteiler
des Trafos gesteckt werden
Trafo 24V 5 - 75W separat
bestellen
Installation
1. LED Trafo an das Netz anschließen.
2. WiFi Controller an den Verteiler des Trafos anstecken.
3. Dynamic LED Leuchte an den Verteiler des WiFi Controllers anschließen.
4. Download und Installation der App „Magic Home Pro“
31
70
16,5
84
45
23
1.
2.
5. W-LAN mit Smartphone suchen, LEDnetxxxxxx auswählen
6. App öffnen
7. Gewünschte Steuerung gedrückt halten um über dem Punkt „Gerätetyp“ den Steuerungstypen „Dynamic“
auszuwählen und Namen zu vergeben
Das Licht der angeschlossenen LED Leuchte kann nun im „Stand-Alone-Modus“ gesteuert werden. Die Reich-
weite beträgt max. 50 m in Innenräumen.
Der WiFi Controller verfügt über eine Memory-Funktion, so daß der letzte Zustand vor einer Netztrennung (z.B.
bei einem Stromausfall oder primärer Schaltung) der LED Leuchten gespeichert bleibt und beim Anschluß an
das Netz wieder aktiviert wird.
Systemvoraussetzungen:
ab iOS 10.0 oder höher
Android 6.0 oder höher
Download-Größe 91 MB (iOS)
bzw. 95 MB (Android)
82
16
62
RST
Power
Link
RST
Power
Link
RST
Power
Link
8 sec
31
16,5
Apple Google
70
RST
Power
Link
82
16
62
RST
Power
Link
RST
Power
Link
RST
Power
Link
8 sec
31
16,5
Apple Google
70
RST
Power
Link

Montage- und Bedienungsanleitung Montage- und Bedienungsanleitung
®
®
Nachdruck auch auszugsweise verboten.
Hera GmbH & Co. KG
Dieselstraße 9
32130 Enger / Germany
Hera GmbH & Co. KG
Dieselstraße 9
32130 Enger / Germany
Hera WiFi Lichtsteuerungssystem Hera WiFi Lichtsteuerungssystem
Nachdruck auch auszugsweise verboten.
Typ 24V WiFi Controller 2 Dynamic Typ 24V WiFi Controller 2 Dynamic24 V DC max. 75W 24 V DC max. 75W
Bedienung der SteuerungBei bestehendem Heimnetzwerk oder mehreren Steuerungen sind die folgenden Punkte zu beachten:
1. Auf das Plus Symbol rechts oben klicken und
„Hinzufügen neuer Geräte“ auswählen
2. Gewünschtes Heimnetzwerk auswählen, zugehöriges
Passwort eingeben und bestätigen
3. Einen Namen vergeben und über „Erledigt“ bestätigen.
Nun kann die Leuchte über das eigene Heimnetzwerk
gesteuert werden
Alle angemeldeten Steuerungen werden unter dem Reiter „Lokal“ angezeigt.
Um weitere Steuerungen anzulernen, sind die oben genannten Schritte jeweils zu wiederholen. Abschlie-
ßend sind alle Steuerungen nach Neustart in der App aufgelistet. In den W-LAN Einstellungen des Smart-
phones werden die Adressen dieser Steuerungen nicht mehr angezeigt.
Timer-Funktion
Mit der Timer-Funktion können individuelle Ein- und Ausschaltzeiten
programmiert werden.
Einstellung der Farbtemperatur
DIY: gedrückt halten um
eingestellte Helligkeit zu
speichern
Steuerung der Lichtfarbe
22600250601 19.10.2021

Montage- und Bedienungsanleitung Montage- und Bedienungsanleitung
®
®
Nachdruck auch auszugsweise verboten.
Hera GmbH & Co. KG
Dieselstraße 9
32130 Enger / Germany
Hera GmbH & Co. KG
Dieselstraße 9
32130 Enger / Germany
Hera WiFi Lichtsteuerungssystem Hera WiFi Lichtsteuerungssystem
Nachdruck auch auszugsweise verboten.
Typ 24V WiFi Controller 2 Dynamic Typ 24V WiFi Controller 2 Dynamic24 V DC max. 75W 24 V DC max. 75W
Bei Reinigung der Oberflächen nur
milde Reinigungsmittel und weiche
Lappen benutzen!
Entsorgen Sie elektrische Geräte nicht im Hausmüll, nutzen Sie die
Sammelstellen in Ihrer Gemeinde. Wenn Sie das Gerät durch ein neues
ersetzen, ist der Verkäufer gesetzlich verpflichtet, das alte mindestens
kostenlos zur Entsorgung entgegenzunehmen.
Im „Stand-Alone-Modus“ kann nur 1 WiFi Controller mit einem Smartphone gesteuert werden. Im Heimnetz-
werk hängt die Anzahl der anzusteuernden Controller nur von der Leistung des Routers ab.
Falls die Verbindung zwischen Smartphone und WiFi Controller nicht funktioniert wie folgt verfahren:
• Netzanschluss prüfen
• Prüfen ob das Smartphone normal mit dem WiFi Netzwerk verbunden werden kann
• Prüfen ob der WiFi Controller mit dem W-LAN verbunden ist. Falls nicht W-LAN mit Smartphone suchen
und LEDnetxxxxxxxxxx auswählen
• App starten und darauf achten, dass der WiFi Controller angezeigt wird.
• Heimnetzwerk:
• In Einstellungen den Status des Netzwerkes prüfen. Wenn das Netzwerk auf „getrennt“ steht Pass-
wort prüfen.
• Ist das Passwort falsch Verbindung zum Router neu herstellen.
• Ist das Passwort richtig aber das Netzwerk noch getrennt, WiFi Controller 3 Sekunden vom Trafo
trennen. Nach 3 Minuten Status des Netzwerkes prüfen.
• Falls das Netzwerk immer noch getrennt ist Router und WiFi Controller ausschalten und nach eini-
gen Minuten neu starten.
Hinweise
Remote-Funktion - Steuerung über das Internet
Die Remotefunktion ist Standartmäßig aktiviert, dies kann über folgende Schritte kontrolliert
werden
1. Links oben auf das Zahnrad Symbol tippen und die
Geräteinstellungen auswählen
2. Sind beide Symbole blau, ist die Remotefunktion bereits aktiviert
3. Ist das Internet Symbol ausgegraut kann durch das Tippen auf das
Gerät das Menü für die Remotesteuerung geöffnet werden
4. Remote Status aktivieren
Reset
Mit folgender Ein - Ausschaltsequenz erfolgt ein Reset auf die Werkseinstellungen und eine Umschaltung in
den Stand-Alone-Modus.
Konformitätserklärung:
Hiermit erklärt Hera GmbH & Co. KG, dass der Funkanlagentyp “Hera 24V WiFi Controller 2 Dynamic“ der
Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden
Internetadresse verfügbar:
http://www.hera-online.de/de/fachliches/konformitaetserklaerung.html
82
16
62
RST
Power
Link
RST
Power
Link
RST
Power
Link
8 sec
31
16,5
Apple Google
70
RST
Power
Link
Nadel
alternativ
Mittels Nadel oder Büroklammer muss die Taste „RST“
gedrückt werden.
• langer Druck (8 Sekunden):
Der WiFi Controller wird wieder auf die
Werkseinstellungen zurückgesetzt.
Der WiFi Controller wird vom Netzwerk-Betrieb
wieder in den Stand-Alone-Modus geschaltet.
Ein
Aus
3 sec
3 sec
Leuchten blinken
Reset erfolgt
22600250601 19.10.2021

Assembly and operating Instructions
®
®
Reproduction of this document in whole or part is forbidden.
Hera GmbH & Co. KG
Dieselstraße 9
32130 Enger / Germany
Hera GmbH & Co. KG
Dieselstraße 9
32130 Enger / Germany
Hera WiFi Light Control System
Reproduction of this document in whole or part is forbidden.
Assembly and operating Instructions
Hera WiFi Light Control System
Type 24V WiFi Controller 2 Dynamic Type 24V WiFi Controller 2 Dynamic24 V DC max. 75W 24 V DC max. 75W
Assembly dimensions
22600250601 19.10.2021
Intended use
1. Disconnect from the mains supply before attempting to mount/ dismount the lighting fixture.
2. Faulty parts should only be replaced with original parts.
3. Always fully insert all plug connections.
4. Connection only to special LED - Converter Hera Type LED 24/...W with a constant output voltage
24 V DC and a maximum output power of 200 W.
5. Hera grants no warranty when other LED converters as the prescribed converters are used.
6. The total load may not exceed the nominal load of the converter.
7. The specified installation distances of the converter must be maintained.
WiFi Controller to connect to electronic safety isolating converter LED 24/...W for adjustable colour appearance
with Dynamic LED luminaires with iOS or Android smartphone or tablet with „Magic Home Pro“ App; this
product is for indoor use only.
both LED 24 plugs must be inserted in the 12-
way distributor of the converter
transformer 24V 5 - 75W
order separately
Assembly
1. Connect the LED converter to the mains.
2. Connect the WiFi Controller to the distributor of the converter.
3. Connect the Dynamic LED luminaires to the distributor of the WiFi Controller.
4. Download and Installation of the App „Magic Home Pro“
31
70
16,5
84
45
23
1.
2.
5. Search W-LAN with smartphone, choose LEDnetxxxxxx
6. Run App
7. Press and hold the desired control unit to select the control unit type „Dynamic“
above the item „Unit type“ and assign name.
The light of the connected LED luminaires can be controlled in the „Stand-Alone-Mode“. The remote distance is
max. 50 m indoor.
The WiFi Controller has a memory function of the performance before a disconnection from the mains. After
reestablish the mains connection the LED luminaires operate in the performance before the power failure.
system requirements:
iOS 10.0 or above
Android 6.0 or above
Download size 91 MB (iOS)
or 95 MB (Android)
Signalling Power Link
Red LED:
Working
Green LED: Networking
82
16
62
RST
Power
Link
RST
Power
Link
RST
Power
Link
8 sec
31
16,5
Apple Google
70
RST
Power
Link
82
16
62
RST
Power
Link
RST
Power
Link
RST
Power
Link
8 sec
31
16,5
Apple Google
70
RST
Power
Link
82
16
62
RST
Power
Link
RST
Power
Link
RST
Power
Link
8 sec
31
16,5
Apple Google
70
RST
Power
Link
82
16
62
RST
Power
Link
RST
Power
Link
RST
Power
Link
8 sec
31
16,5
Apple Google
70
RST
Power
Link
82
16
62
RST
Power
Link
RST
Power
Link
RST
Power
Link
8 sec
31
16,5
Apple Google
70
RST
Power
Link

Assembly and operating Instructions
®
®
Reproduction of this document in whole or part is forbidden.
Hera GmbH & Co. KG
Dieselstraße 9
32130 Enger / Germany
Hera GmbH & Co. KG
Dieselstraße 9
32130 Enger / Germany
Hera WiFi Light Control System
Reproduction of this document in whole or part is forbidden.
Assembly and operating Instructions
Hera WiFi Light Control System
Type 24V WiFi Controller 2 Dynamic Type 24V WiFi Controller 2 Dynamic24 V DC max. 75W 24 V DC max. 75W
Controller apply interface
Timer-Function
Individual turn on and turn off times can be programmed with the Timer-Function.
DIY: press to save the
adjusted brightness
Colour adjustment
Control of the light appearance
How to connect WiFi Controller to home network or using multiple controller:
1. Click on the plus symbol at the top right and
select „Add new devices“
2. Select the desired home network, enter the associated
password and confirm
3. Assign a name and confirm by clicking on „Done“.
Now the luminaire can be controlled via the home network.
All connected controller can be found under the flag „Local“.
To adjust further controller repeat these points. Finally you can find all controller in the App after restar-
ting. The adresses of theses controllers are not shown in the W-LAN settings of the smartphone.
22600250601 19.10.2021

Assembly and operating Instructions
®
®
Reproduction of this document in whole or part is forbidden.
Hera GmbH & Co. KG
Dieselstraße 9
32130 Enger / Germany
Hera GmbH & Co. KG
Dieselstraße 9
32130 Enger / Germany
Hera WiFi Light Control System
Reproduction of this document in whole or part is forbidden.
Assembly and operating Instructions
Hera WiFi Light Control System
Type 24V WiFi Controller 2 Dynamic Type 24V WiFi Controller 2 Dynamic24 V DC max. 75W 24 V DC max. 75W
Frequently Questions
In „Stand-Alone-Mode“ only 1 WiFi Controller can be connected to a smartphone. In network mode the quan-
tity that how many WiFi Controller can be connected depends on router level.
When failed to connect smartphone and WiFi Controller follow these conditions:
• Check power supply
• Check if smartphone can be connected to WiFi network normally
• Check whether Controller is connected to W-LAN successfully or not. If not search W-LAN with smartpho-
ne and connect LEDnetxxxxxxxxxx
• Run App and make sure it shows the WiFi Controller.
• Network mode:
• Check status of network in Settings. If status is „unconnected“ check password of the router.
• If password is wrong reconnect the router to the smartphone.
• If the passwort is right but the network is still unconnected power off WiFi Controller for 3 seconds.
Wait additional 3 minutes and check status of network by same methods.
• If the network is still unconnected power off router and WiFi Controller. Wait a couple of minutes
and restart router and WiFi Controller.
Only clean surfaces with a mild
cleaning agent using a soft cloth!
Do not dispose of electrical appliances in household waste, use separate
collection facilities. When replacing old appliances with new ones, the
retailer is obliged by law to accept to take back your old appliance for
disposal free of charge.
Declaration of Conformity:
Hera GmbH & Co. KG declares that the product „ Hera 24V WiFi Controller 2 Dynamic “ corresponds to the
directive 2014/53/EU. The full text of the EU-Declaration of Conformity is available on the following internet
address:
http://www.hera-online.de/en/technical-information/declaration-of-conformity.html
82
16
62
RST
Power
Link
RST
Power
Link
RST
Power
Link
8 sec
31
16,5
Apple Google
70
RST
Power
Link
needle
alternative
With a needle or paper clip press and hold the button
„RST“.
• long pressure (8 seconds):
The factory settings of the WiFi Controller are
restored. The WiFi Controller is switched from
network mode to Stand-Alone-Mode.
Reset
The following switching sequence describes the reset to factory settings. After reset to factory settings the WiFi
Controller is switched to the Stand-Alone-Mode.
On
Off
3 sec
3 sec
Connected
luminaires are
flickering. Reset
finished
Remote-Function - Controls via Internet
The remote function is activated by default, this can be checked via the
following steps
1. Tap the cogwheel symbol at the top left and select the
device settings
2. If both symbols are blue, the remote function is already activated.
3. If the Internet symbol is greyed out, tapping on the device opens the
menu for the remote control
4. Activate Remote Status
22600250601 19.10.2021
This manual suits for next models
1
Table of contents
Languages:
Other HERA Controllers manuals
Popular Controllers manuals by other brands

Digitrax
Digitrax DN166PS quick start guide

Netafim
Netafim Orbia GrowSphere MAX user manual

Chemglas
Chemglas CG-2033-X-31 Operation manual

Fisher
Fisher D500243X012 instruction manual

Chore-Time
Chore-Time SUPER-Selector PT 40866 Installation and operation manual

Matrox
Matrox QuadHead2Go Q2G-DP4K Configuration guide