Heritage Audio 80 Series User manual

USER MANUAL
8-SLOT
80 SERIES
August/2022)Rev.)1.0.)
FRAME 8

INTRODUCTION
CONTENTS
DESCRIPTION
APPLICATIONS!
SPECIFICATIONS
TROUBLE SHOOTING
WARRANTY STATEMENT
REGISTRATION!
RECALL SHEETS
2
2
3
6
9
9
10
10
11
TABLE OF CONTENTS
Thank you for choosing the FRAME 8. Heritage Audio is dedicated to bringing you ´the sound of yesterday for
tomorrow´. We specialize in capturing that unique, enticing sound that everybody has fallen in love with. For years
engineers, producers and musicians have been yearning for that classic vibe. Usually the only option is to search for
old, used original equipment that is almost always in a questionable state of operation. This brings with it a whole lot of
other issues, making the experience less than desirable. Not to mention the very high prices asked for this equipment,
which makes them virtually unobtainable for the great majority. Now it´s possible to obtain that same sound with a
brand new piece that will give you all the problem-free, heavy-duty use you´ll need for years of music making history.
Peter Rodriguez
CEO!
Heritage Audio - Madrid, Spain
INTRODUCTION
© 2022 Heritage Audio S.L. is the sole owner of the copyright of all information and drawings contained in this manual which are not to be copied or
reproduced by any means or disclosed in part or whole to any third party without written permission.
Heritage Audio reserves the right to alter specifications without notice. The information in this manual has been carefully checked and is believed to
be accurate at the time of publication. However, no responsibility is taken by us for inaccuracies, errors or omissions nor any liability assumed for any
loss or damage resulting either directly or indirectly from use of the information contained within it.
2
FRAME 8
AC POWER CORD EU & US
POWER SUPPLY HA-PSU08

DESCRIPTION
Our FRAME 8 is handmade in the EU employing the same exact ISEP mechanical components used in the Series 80
consoles with aluminium rails, guides, etc. This will ensure your original vintage modules, as well as any of the currently
made modules, will fit like a glove.
Every channel has its own output control to attenuate the signal before the output transformer as well as an illuminated
phantom switch to provide 48 V.
The FRAME 8 is also ready for linking up to eight 2264E (Legacy Product) compressors.
The back panel features Neutrik gold plated XLR connectors for MIC and LINE inputs, as well as LINE outputs for
connecting equipment.
External Power Supply Unit is connected by a Neutrik gold plated 4-pin XLR. It is configurable for 220-240 V or 110 V.
The power supply is included.
3
8173 Modules not included
8173 Modules not included

GETTING STARTED
FRONT
4
1
2
3
4
5
PHANTOM POWER SWITCH
Activates the 48 V power for
Condenser MICs.
OUTPUT ATTENUATOR
Attenuates from 0 to infinity
8 x EDGE CONNECTOR
To connect and power the 80
Series Modules.
Impedance Switch Space
Opening to allow the
Impedance Switch through.
RAIL
To fasten and secure the 80
Series Modules in place.
5
1
2
3
4
FRAME 8 EDGE CONNECTOR PIN OUT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
0V
To Pin V
Hi
Lo
Mic I/P
-20dBu
Hi
Lo
Line I/P
0V
To Pin V
LINK
Unbalanced O/P
Hi
Lo
BAL O/P
To Pin V
+24V
0dBu
0dBu
-3dBu
Technical!
Earth Link

REAR
5
All XLRs are:
Pin 1: GND!
Pin 2: Hot!
Pin 3: Cold
1
2
3
3
2
1
GND!
Hot (+)!
Cold (-)
MALE XLR
FEMALE XLR
1
2
3
4
MIC INPUT
8 x Female XLR, Gold Plated.
LINE INPUT
8 x Female XLR, Gold Plated.
LINE OUTPUT
8 x Male XLR, Gold Plated.
POWER CONNECTOR
Neutrik gold plated 4-pin XLR.
1
2
3
4

DRUM
RECORDING
APPLICATIONS
MONITOR
SPEAKERS
THUNDERBOLT
COMPUTER
KICK
SNARE
HI HAT
TOM 1
OH - L
SNARE
TOM 2
OH - R
2 - MIC INPUT
3 - MIC INPUT
4 - MIC INPUT
5 - MIC INPUT
6 - MIC INPUT
7 - MIC INPUT
8 - MIC INPUT
OUTPUTS 1-8
1
2
3
5
4
8
6
7
INPUTS 1-8
LINE INPUTS
AUDIO INTERFACE
6
1 - MIC INPUT
8173 & 6673 Modules not included

7
LINE
USB - COMPUTER
LINE INPUTS - AUDIO INTERFACE
OUTPUTS 1-2
LINE OUTPUTS
KEYBOARD
LINE INPUTS 1-2
6673 Modules not included

AUDIO
PROCESSING
OUTPUTS 1-8
LINE INPUTS 1-8
8
LINE
OUTPUTS
1-8
THUNDERBOLT
COMPUTER
LINE
INPUTS
1-8
AUDIO INTERFACE
MONITOR
SPEAKERS
8173 & 6673 Modules not included

SPECIFICATIONS
9
• Handcrafted in the EU employing the same mechanical components used in vintage Series 80 consoles.
• Neutrik gold-plated XLRs for Mic and Line inputs.
• Neutrik gold plated XLRs outputs.
• Illuminated red pushbuttons for +48 V phantom power (Less than 260 mA @ 48 V DC).
• Prepared for Compression Linking of buses A and B.
• Separate output controls per slot.
• Dimensions (W x H x L): 315 mm x 230 mm (6U) x 482 mm.
TROUBLE SHOOTING
PROBLEMS
SOLUTIONS
There doesn´t seem to be any power feeding the
FRAME 8.
Make sure it has been connected to its power supply.
It is configurable for 220-240 V or 110 V
I´m trying to use a condenser microphone but it doesn´t
seem to recognise it.
Make sure you have activated the 48 V button for the
corresponding channel.
I´m getting too much signal at my DAW.
Try reducing the OUTPUT with the red knob on the right.
I´d like to change the Impedance from 1200 to 300 Ωbut
don´t know how.
There is a switch on the back of the modules that will
allow this. You will have to remove the module first to
access it.
* For any further doubts or questions please get in contact with us at: [email protected]!

LIMITED 2 YEAR WARRANTY
Heritage Audio FRAME 8 is warranted by Heritage Audio SL to be free from defects in materials and workmanship for
the period of 2 years to the original purchaser. In the event of such defects, the product will be repaired without charge
or, at our option, replaced with a new one if delivered to Heritage Audio prepaid, together with a copy of the sales slip or
other proof of purchase date. The warranty excludes problems due to normal wear, abuse, shipping damage or failure
to use the product in accordance with the specifications.
Heritage Audio shall not be liable for damages based upon inconvenience, loss of use of the product, loss of time,
interrupted operation or commercial loss or any other damages, whether incidental, consequential or otherwise.
This warranty is not transferable.
REGISTRATION
10
Please visit our website:
WARRANTY STATEMENT
https://heritageaudio.com/registration/

RECALL SHEETS
11
Session / Title: Track: Connected Equipment: !
Date: Instrument: Notes:
Switch ON
Switch OFF
Session / Title: Track: Connected Equipment: !
Date: Instrument: Notes:
Switch ON
Switch OFF

www.heritageaudio.com
HERITAGE AUDIO. C/ Alfonso Gómez, 38, 3C. 28037 Madrid – Spain. Tel: [phone]
[email protected]