HES 5900 Series User manual

®
5900 Series Electric Strike
Installation Instructions
HES, Inc.
22630 N. 17th Ave.
Phoenix, AZ 85027
800-626-7590
www.hesinnovations.com
1
Product Components
Diagram 1: Electrical Specifications
ELECTRICAL RATINGS FOR SOLENOID MINIMUM WIRE GAUGE REQUIREMENTS SOLENOID VOLTAGE CONTINUOUS DUTY
12VDC 12VDC
50
.24
24VDC 24VDC
200 50 200
.12 .24 .12
12VAC 24VAC
INTERMITTENT DUTY*
Resistance in Ohms
Amps
Solenoids are rated at +/- 10% indicated value.
*10% max duty cycle (2 min. max on time)
200 feet or less
200 - 300 feet
300 - 400 feet
18 gauge
16 gauge
14 gauge
20 gauge
18 gauge
16 gauge
Faceplate (sold separately)
#12-24 Mounting Screws (included with faceplate)
#8-32 Faceplate Screws (included with faceplate)
1
2
5900 Electric Strike Body
Sticky Shims (optional use)
1
2
3
4
5
3
5

6
5900 with 593 Faceplate
1-1/4” x 6-7/8” Radius Corner Faceplate
Aluminum Jamb Installations
5900 with 595 Faceplate
1-3/8” x 9” Radius Corner Faceplate
Aluminum or Wood Jamb Installations
6-1/8" [156]
6-7/8" [175]
3-3/8" [86]
1-1/4" [32]
1/8" [3]
9" [228.4]
1-3/8" [35]
3-3/8" [86]
3/32" [2.4]
1/8" [3]
Cutout Template
©2007 HES, Inc.
4063006.001 rev A
Remove additional material as
needed to provide clearance for
electric strike and wires. Then drill
for wires (see Diagram 8)
Inches [mm]
1-1/16