Assa Abloy Lockwood 530 DX Series User manual

DX Mechanical Digital Door Locks
Service Manual
ASSA ABLOY, the global leader
in door opening solutions

Service Manual:
This manual contains a complete listing of parts and assemblies
for the DX Series Mechanical Digital Locks supplied by ASSA
ABLOY Australia. Exploded views are included along with parts
list for ordering of replacement components.
ASSA ABLOY Australia reserves the right to make changes in
design or specifications, or to make additions or improvements
to their product without incurring any obligation to incorporate
these amendments in product previously manufactured.
ASSA ABLOY Australia are not responsible for additions or
alterations made to their product by others.
Maintenance:
Cleaning: Care should be taken during construction/
refurbishment to ensure that paint, thinners, mortar or cement
splashes are carefully removed from locks, furniture and
hardware. Removal of these splashes with strong cleaning agents
or scourers should be avoided.
Dirt and grime should be regularly removed with a soft damp
cloth. A solution of mild soap and water may be required. During
cleaning, care should be taken to prevent cleaning solution from
entering the cylinder keyway. Surfaces should be dried.
Introduction

Contents
Setting a New Code 6
530 DX Mechanical Digital Locks 8
530 DX Mechanical Digital Locks – 2 Pads 9
002 DX Mechanical Digital Locks 10
Synergy 3572 DX Mechanical Digital Locks 11
Synergy 3572 DX Mechanical Digital Locks - Key Override 12
Synergy 3582 DX Mechanical Digital Locks 13
Mounting Instructions 14

The global leader in door opening solutions
ASSA ABLOY Australia Limited, 235 Huntingdale Rd, Oakleigh, VIC 3166 ABN 90 086 451 907 ©2012
4
Setting a New Code
If necessary the factory set five digit code can be easily
changed to a new four, five or six digit code of your choice.
STEP 1:
SELECT YOUR NEW CODE:
Use any combination of numbers or letters (0 to 9 XYZ) as
a four, five or six digit code. EACH DIGIT CAN ONLY BE USED
ONCE IN A CODE.
NOTE: BUTTON ‘C’ is used for clearing the code selector
mechanism and CANNOT BE CHANGED.
STEP 2:
PREPARE LOCK FOR RE-CODING: KEEP LOCK
HORIZONTAL WHILE CHANGING CODE
(a) Remove adaptor plate. (where fitted)
(b) Remove four red screws and carefully remove backplate.
STEP 3:
SETTING YOUR NEW CODE:
(a) Hold button ‘C’ depressed on front face while
repositioning tumblers.
(b) Using tweezers supplied, reposition RED and BLUE
tumblers as follows: RED TUMBLERS are located in holes
corresponding to new code. Insert one red tumbler for each
digit in the code. e.g. a four digit code requires four red
tumblers. (Where necessary use spare tumblers from plastic
wallet.) BLUE TUMBLERS are located in all remaining holes.
INSERT TUMBLERS WITH COLOURED END UP AND LARGE
SQUARE CUT-OUT FACING SIDE OF LOCK. EVERY HOLE MUST
HAVE A TUMBLER FOR THE LOCK TO FUNCTION.
(c) Release button ‘C’ after repositioning tumblers.
STEP 4:
TO RE-ASSEMBLE:
Replace backplate carefully and secure with four red screws.
CHECK THAT LOCK FUNCTIONS CORRECTLY USING NEW
CODE BEFORE INSTALLING ON DOOR. Retain tweezers, spare
tumblers and instructions for future code changes.
EXAMPLES OF CODES
FOUR DIGIT CODE - C
FIVE DIGIT CODE - C
SIX DIGIT CODE - C
2347
897YZ
01349X
ADDITIONAL KEYPAD
TUMBLERS:
RED SPDX-42
BLUE SPDX-43
8
9
Z
1
2
3
4
5
Y
X
C
6
7
0
KEYLESS
KEY
8
9
Z
1
2
3
4
5
Y
X
C
6
7
0
8
1
2
3
6
7
RED BLUE
LARGE
SQUARE
CUT
LARGE
SQUARE
CUT
TUMBLER
COLOURED END UP
8
9
Z
1
2
3
4
5
Y
X
C
6
7
0
8
9
Z
1
2
3
4
5
Y
X
C
6
7
0
8
9
Z
1
2
3
4
5
Y
X
C
6
7
0
8
9
Z
1
2
3
4
5
Y
X
C
6
7
0
TUMBLER
TWEEZERS
HOLD BUTTON
‘C’ DEPRESSED

DX Mechanical Digital Locks

6
530 DX Mechanical Digital Locks 530 DX Mechanical Digital Locks
Orderable Locks 530DXSC DX Digital 530 Latch Trade Pack 530DXPB DX Digital 530 Latch Trade Pack 530DXSCDP DX Digital 530 Latch Display Pack 530DXPBDP DX Digital 530 Latch Display Pack
Fixing screw Door thickness: 33 to 45mm: SP930-108ZP 46 to 65mm: SP930-208ZP
Latch and Strike Kits 60mm backset: 530-12SC (default) 70mm backset: 530-222SC 127mm backset: 530-225SC
Internal plate & gasket SPDX-30SC
Code pad and gasket SPDX-20SC
Spindle Door thickness: 33 to 45mm: SP10000-127ZP (default) 46 to 55mm: SP10000-627ZP 56 to 65mm: SP10000-727ZP

7
530 DX Mechanical Digital Locks - Two Pads
Fixing Screws Door thickness: 33 to 45mm: SP930-108ZP 46 to 65mm: SP930-208ZP
Latch and Strike Kits 60mm backset: 530-12SC (default) 70mm backset: 530-222SC 127mm backset: 530-225SC
Spindles Door thickness: 33 to 45mm: SP10000-1127ZP (default) 46 to 55mm: SP10000-1227ZP
External Code Pad & gasket SPDX-20SC
Internal Code Pad & gasket SPDX-220SC
530 DX Mechanical Digital Locks – 2 Pads Orderable Locks 530DXSC/PADSX2 DX Digital 530 Latch Trade Pack 2 Pads 530DXPB/PADSX2 DX Digital 530 Latch Trade Pack 2 Pads

8
002 DX Mechanical Digital Locks
Code pad & gasket SPDX-50SC
002 DX Mechanical Digital Locks Orderable Locks 002-1KDXSC DX Digital 002 Knob Timber Strike Trade Pack 002-3KDXSC DX Digital 002 Knob Metal Frame Strike Trade Pack 002-4KDXSC DX Digital 002 Knob Open Out Strike Trade Pack
002-1LDXSC DX Digital 002 Lever Timber Strike Trade Pack 002-3LDXSC DX Digital 002 Lever Metal Frame Strike Trade Pack 002-4LDXSP DX Digital 002 Lever Open Out Strike Trade Pack 002-1KDXSCDP DX Digital 002 Knob Timber Strike Display Pack
Mounting plate SPDX-520
Spindle SP10000-138ZP
Mounting plate screw SP10000-134ZP
Code pad fixing screw SP10000-108ZP
Screw cup washer SP10000-107SC
002 Variations Knob timber timber open in: 002-1K1SC Knob metal frame open in: 002-3K1SC Knob open out: 002-4K1SC Lever timber frame open in: 002-1L1SC Lever metal frame open in: 002-3L1SC Lever open out: 002-4L1SC

9
Synergy 3572 DX Mechanical Digital Locks
3572 DX Mechanical Digital Locks Orderable Locks 3572DXLSC DX Digital 3572 60mm Backset Left Hand 3572DXRSC DX Digital 3572 60mm Backset Right Hand 4572DXLSC DX Digital 3572 89mm Backset Left Hand 4572DXRSC DX Digital 3572 89mm Backset Right Hand 5572DXLSC DX Digital 3572 127mm Backset Left Hand 5572DXRSC DX Digital 3572 127mm Backset Right Hand
Code Pad & gasket SPDX-50SC
Mounting plate SPDX-324
Mounting Plate Screw SP10000-134ZP
Screw cup washer SP10000-107SC
Fixing Screws SP1800-408ZP (50MM) SRWM4-65SS (65MM)
Adaptor SP3570-5050
Lock 3572SC
For components that relate specifically to the mortice lock refer to the Synergy Series Service Manual for Details. 1800/2800 internal furniture plate required to complete assembly - ordered separately.
Furniture Fixing Screw SPDS806/32AZP
Spindle SP10000-138ZP

10
3572 DX Key Override Mechanical Digital Locks Orderable Locks 3572DXKOLSC DX Digital 3572 60mm Backset Key Override Left Hand 3572DXKORSC DX Digital 3572 60mm Backset Key Override Right Hand 4572DXKOLSC DX Digital 3572 89mm Backset Key Override Left Hand 4572DXKORSC DX Digital 3572 89mm Backset Key Override Right Hand 5572DXKOLSC DX Digital 3572 127mm Backset Key Override Left Hand 5572DXKORSC DX Digital 3572 127mm Backset Key Override Right Hand
Synergy 3572 DX Mechanical Digital Locks - Key Override
3572DXKOLSCNCYL DX Digital 3572 60mm Backset Key Override Left Hand No Cylinder 3572DXKORSCNCYL DX Digital 3572 60mm Backset Key Override Right Hand No Cylinder 4572DXKOLSCNCYL DX Digital 3572 89mm Backset Key Override Left Hand No Cylinder 4572DXKORSCNCYL DX Digital 3572 89mm Backset Key Override Right Hand No Cylinder 5572DXKOLSCNCYL DX Digital 3572 127mm Backset Key Override Left Hand No Cylinder 5572DXKORSCNCYL DX Digital 3572 127mm Backset Key Override Right Hand No Cylinder
Mounting Plate Accessory Packet SP3577-5619
Spindle SP10000-138ZP
Lower cylinder assembly 577-2SC
Fixing screws SP1800-408ZP (50MM) SRWM4-65SS (65MM)
Screw cup washer SP10000-107SC
Key override cylinder mounting plate SPDX-524
Mounting plate screw SP10000-134ZP
Mounting plate SPDX-324
Code pad & gasket SPDX-50SC
Adaptor SP3570-5050
Lock 3572SC
For components that relate specifically to the mortice lock refer to the Synergy Series Service Manual for Details. 1800/2800 internal furniture plate required to complete assembly - ordered separately.