Heta SCAN-LINE GREEN 300 User manual

1
Climate
EN
EN

2
Climate
EN
HETAclimate
Wi-Fi

3
Climate
EN
ENGLISH
CONTENTS
SYSTEM STRUCTURE .......................................................................... 2
LOCAL AND REMOTE CONNECTION ............................................... 3
HETAclimate MECHANICAL SPECIFICATIONS............................... 4
HETAclimate BUTTONS AND LEDS .................................................. 5
INSTALLATION.......................................................................................6
NEW MODULE – Wi-Fi CONFIGURATION......................................... 7
CONNECT TO A CONFIGURED Wi-Fi MODULE..............................11
HOME SCREEN ....................................................................................13
DEVICE SETTINGS ..............................................................................16
DEVICE CONTROL ...............................................................................17
TIMER AND 24H FUNCTION .............................................................18
GRAPHS.................................................................................................23
INFORMATION SCREEN.....................................................................24
MENU.....................................................................................................25

4
Climate
EN
The structure consists of 3 macro systems:
1. Wi-Fi MODULE: hardware unit that works with the motherboard and
communicates via the Wi-Fi router.
2. SERVER IN THE CLOUD: Web server infrastructure that enables data storage and
serves as a relay for remote communication.
3. APP: mobile application (available for free on Google Play and App Store), which
allows you to communicate with the pellet stove.
Wi-Fi
Local network
4G – ADSL
External
network
Connected to the
motherboard
Router
Server in the cloud
SYSTEM STRUCTURE

5
Climate
EN
LOCAL AND REMOTE CONNECTION
Local connection
The connection between the Wi-Fi module and the app via the local Wi-Fi network
(only if both are connected to the same Wi-Fi network).
delay 0 ms
Remote connection
The connection is remote when the app is no longer connected to the local network.
In this case, the app uses your mobile phone’s data connection and communicates
with the server. Remote connection times can vary depending on data network trafc,
network connectivity, and server trafc.
In the worst case, connections may be up to 5 minutes delayed.
The remote connection can only be used if you have
previously registered on the server in the cloud!
delay 0 ms
12
3 4
delay
2 min
delay
1 min
delay 0 ms

6
Climate
EN
MECHANICAL SPECIFICATIONS
COM port RS232
RS485
Power supply 5V
Cabinet Cabinet in ABS
Working temperature -20° ÷ 60°
Attachment Self-tapping 5 mm screws
70 mm
70 mm
64 mm
20 mm
The device is only guaranteed to function with the cables provided.

7
Climate
EN
BUTTONS AND LEDS
(a) Power/Error
(d) HW reset button
(e) Conguration button
(b) COM connection
(c) Wi-Fi communication

8
Climate
EN
INSTALLATION
1. Connect the Wi-Fi module to the power supply:
LED (a) must be lit and not ashing.
2. Connect the Wi-Fi module to the pellet stove using the cable provided:
LED (b) must be lit and not ashing. If it ashes, there may be communication
problems with the pellet stove. Make sure the pellet stove is connected to
the power outlet and the switch is on.
3. Wi-Fi communication: LED (c) must be lit to conrm a connection between the
app and the server.
4. Hardware reset button (d): Press this button if errors persist and restart the
conguration.
If the device is ofine during normal operation, press the conguration button
for 3 seconds. During conguration and operation, the LEDs can change from
lit to ashing.
Power ashing error
lit OK
COM ashing no connection to the pellet stove
lit connection OK
Wi-Fi ashing Wi-Fi is not congured
lit Wi-Fi connected
Power/Wi-Fi ashing conguration in progress

9
Climate
EN
NEW MODULE – Wi-Fi CONFIGURATION
New HETA module conguration
It is recommended that you connect your smartphone to your local Wi-Fi network
before you start the conguration.
When you start the app, you can choose the desired language. The steps for
conguring the HETA module are explained below:
1. Create an account using a valid email address and
password of your choice by lling in the elds.
2. Choose between ‘FIND DEVICE’ and ‘HETAclimate’.
HETA Climate or HETAclimate Lite:
select ‘ADD HETAclimate’ and follow the tutorial.

10
Climate
EN
NEW MODULE – Wi-Fi CONFIGURATION
3.
HETAclimate creates a temporary Wi-Fi connection that you must connect to
on your smartphone. To connect your smartphone, go to Wi-Fi -> Settings on
your smartphone. From the Wi-Fi list, select ‘4HEAT WI-FI’. If your smartphone
asks to remain connected to this Wi-Fi network, you must accept this, otherwise
conguration cannot be completed. HETAclimate can then connect to the app and
the linked account.
To activate ‘HETA WI-FI’ with the various modules:
• HETAclimate: Press button (e). The blue (c) and red (d) LEDs start ashing
alternately
• HETA Lite: press button (b), and the blue LED (a) starts ashing
4.
Write a name for the device and enter a PIN of you choice.
Each HETAClimate device has its own name and password.

11
Climate
EN
NEW MODULE – Wi-Fi CONFIGURATION
5.
Once the app and HETAclimate are connected, you will be asked to select the home
Wi-Fi system that the HETAclimate device should connect to.
6.
Make sure that the smartphone connects to your home Wi-Fi and that the LEDs
change and continue in the conguration step.

12
Climate
EN
NEW MODULE – Wi-Fi CONFIGURATION
If the conguration procedure fails, you can recongure HETAclimate by pressing and
holding the button for 10 seconds. (Only if all three green LEDs don’t ash) And then
press button (b) for 10 seconds.
The screens and descriptions may vary depending on the device you are conguring.
Once installation of the HETAclimate device is complete, it is recommended that you
close the app and restart it.
Close the app between open windows in the background. On Apple devices.

13
Climate
EN
CONNECT TO A CONFIGURED Wi-Fi MODULE
You can also connect remotely (using your smartphone’s data connection) by
entering the login details for a HETAclimate device you have congured.
You can also connect remotely (using your smartphone’s data connection) by
entering the login details for a HETAclimate device you have congured.
Connected to the same Wi-Fi network. Connected remotely.
When a device is added or found, the home screen displays the list of connected
devices, and the main temperature and status for each.
Linked HETAclimate devices appear on the home screen using their identifying name.
The app reports:
Operating state OFF
Operating state BLOCKED
Operating state ON
Not connected or unavailable device.

14
Climate
EN
• Double-tap the Home button in the HETA app to close it.
On Android devices
• Tap the lower-right button for devices with virtual keys or the lower-left button for
devices with xed keys
• Swipe left on the preview of the HETA app to close it
The procedure can vary from smartphone to smartphone.
Connection to a HETAclimate device that is already congured
In the ‘FIND DEVICE’ section, you can connect to a HETAclimate device by entering
the PIN (if HETAclimate is connected to the same Wi-Fi as your smartphone).
CONNECT TO A CONFIGURED Wi-Fi MODULE

15
Climate
EN
HOME SCREEN
The home screen shows a list of modules connected to the app.
The linked devices are shown on the home screen using their ID name.
The status of each device is displayed as follows:
Operating state OFF
Operating state BLOCK
Operating status ON
Not connected or unreachable device
Updating required
Accessing settings

16
Climate
EN
HOME SCREEN
Tap on this icon to add another Wi-Fi module.
This menu displays the device information associated with your app,
including the ID and PIN.
Account management: this menu allows you to
create a new account or log in/out.
Restore app: this menu allows you to reset the app
to factory settings.
Reactivate guide: this menu allows you to
reactivate the guide to using the app for the rst
time.
Notication management: this menu allows you to
enable notications regarding the pellet stove.
Change language: this menu allows you to change
the menu language.
App info: this menu allows you to view information
about the version of the app installed on your
smartphone.
Download instructions: this menu allows you to
download a user guide to the app. Tap on the save
icon to save the manual on your smartphone.
Help centre: opens a link to a website with help
and information.

17
Climate
EN
HOME SCREEN
It allows you to connect to the management applications of the smart
thermostats installed in you home system. To connect to the smart
thermostats, enter the account credentials you recorded when setting it
up.

18
Climate
EN
DEVICE SETTINGS
Access to the settings menu on the selected device.
Device name: used to change the name of the current device.
Icon: change the device’s display icon on the home screen.
Remote support enabled: you can activate the option to
receive technical support.
Widget: allows you to select the widgets that appear on the
main screen.
Settings menu: allows you to customise how menu features
are displayed. Some features may not be available due to how
the pellet stove is congured.
Settings info: allows you to customise how system values are
displayed in the info menu.
Remove device: allows you to delete a device in the app.
Info: technical information related to the product code in the
motherboard and the rmware version in the module.
Wi-Fi info: information about the network to which the Wi-Fi
module is connected.

19
Climate
EN
DEVICE CONTROL
Operating status:
displays the status of
the pellet stove, which
function is active and any
error message..
Red = OFF: press to
turn on the pellet stove.
Green = ON: press to
turn off the pellet stove.
Synchronisation:
if the LED is ashing
it means the app and
Wi-Fi module are
communicating.
Current room
temperature
Desired room temperature:
Press the icon for
2 seconds to activate
adjustment of the desired
room temperature.
Use the and buttons
or slide the coloured band
to adjust to the temperature
you want.
Widget:
displays information related to the pellet
stove. You can decide which widget to
display using the menu .

20
Climate
EN
TIMER AND 24H FUNCTION
From the Timer menu you can select and change settings in two different modes.
Press to change the selected mode and its function.
When you enter the TIMER function you can set three different time periods.
You can further choose from three types of programming:
• Weekly: Set the same three time periods for all days.
• Daily: Set each day separately
• Weekend: Set time periods for the weekend (Saturday and
Sunday) or weekdays (Monday to Friday)..
24H function
OFF
TIMER function
ON
TIMER
Each time you change a setting, press the Save the button.
To clear a time period, slide it to the left and tap the waste
bin.