Hewalex KSOL-2 User manual

KSOL-2 UNIVERSAL CONSTRUCION WITH MULTIPLE KS2500
COLLECTORS ASSEMBLY INSTRUCTION
Spacing of openings for the assembly of the KSOL-2 2500 universal structure
No
Name
Mount
1
Vertical bar
2
2
Upper horizontal bar
2
3
Lower horizontal bar
2
4
Bottom connector
2
5
Back connector
2
6
Diagonal connector
1
7
Base
4
8
Collector grasper
8
9
Connector
4
10
Connector
4
11
Insert
12
12
Screw M6x40
8
13
Nut M6
10
14
Screw M8x16
28
15
Screw M8x20
4
16
Washer Ø8
32
17
Nut M8
32
18
Nut cap
16
19
Cap
4
20
Connector
2
21
Screw M6x20
2
1a
1b
1c
19
8
18
11
10
9
19
20
1
3
4
6
5
7
2
8
20

f
The KSOL-2 universal structure is used to mount a set of 2 KS2500 collectors.
Steps of the assembly:
1. Attach the connectors (10) to the horizontal bars (2, 3). Attach the top horizontal bar (2) and the bottom one (3) to the
vertical bars (1).
2. Attach the bases (7), the bottom connector (4), the back connector (5) and the diagonal connector (6).
3. During the assembly, remove the upper collector graspers (8). Place the solar collectors on the frame’s platform,
keeping a distance of 85 mm between the collectors. Put the top graspers (8) in the place marked with rubber washers
and put caps on the nuts (18).
4. Push in and screw tight the bottom graspers of the collector (8) and put caps on the nuts (18).
2a
2b
2c
2d
3
4