Hh electronics Tessen tni-w4 User manual

iNSTALL

Designed and Engineered in the UK by HH Electronics LTD. © 2021 HH Electronics LtdFrançais 25 - 32Español 33 - 40 Português 41 - 48中国人 49 - 56한국어 57 - 64Safety Information:English 66Deutsche / Français 67Español/ Português 68Italiano 69中国人 70한국어 71日本語 72Specifications 10 - 16 Contents: Page:English Manual 2 - 9Translations:Deutsche 17 - 24

iNSTALL

Designed and Engineered in the UK by HH Electronics LTD. © 2021 HH Electronics LtdINTRODUCTION The Tessen wall mount installation speaker range includes 3 models: TNi-W4 (4 inch), TNi-W6 (6.5 inch) and TNi-W8 (8 inch) providing premium audio reproduction with effortless installation. Each of the TNi-W speakers feature adjustable power settings, and the ability to connect to 70V/100V or 8 Ohm lines. Vertical or horizontal mounting is possible using the included multi-position steel bracket, ensuring the engineer has everything required when the box is opened on site. With Euroblock or M4 input and output connectivity, the TNi series delivers versatility for the job at hand and all enclosed in light weight ABS enclosures.SAFETY The cabinets should be installed by properly qualiﬁed persons, in compliance with all local regulations and laws. The position of installation is also bound by laws and regulations so must be taken into account in the initial planning stages. If any of the hardware shows any signs of wear or damage, it should be replaced immediately.1: Choose a suitable location for the installation. Fixing is achieved via the four M4 ﬁxing holes (indicated below) on the included mounting bracket. Before proceeding, please consider the following:ŸThe structural integrity of the mounting surface.ŸThe type of ﬁxing used. This is dependent on the structure of the mounting surface.All installation equipment used is subject to regular safety checks which must be strictly adhered to.ŸThe position of the mounting bracket, and available clearance for the cabinet.ŸRear clearance and the possibility of hidden hazards, such as wiring or pipework.ŸFor added security, the use of a safety harness is advised and may be legally required in your market.VERTICAL AND HORIZONTAL CLEARANCEFailure to do so could result in serious injury or death!INSTALLATION2WALLWALLXZCEILINGYZZ - A suggested minimum clearance(Dimensions in mm)

ModelXYZ

TNi-W49021030

TNi-W611823730

TNi-W814026530

SATELLITE WALL SPEAKER

iNSTALL

Designed and Engineered in the UK by HH Electronics LTD. © 2021 HH Electronics Ltd3: Using suitable ﬁxing, attach the wall mounting bracket ﬁrst. 5: Re-assemble the two halves of the bracket using the M8 bolt and associated hardware.1: Using spanners (indicated) remove the M8 bolt.The easiest way to install the bracket system is as follows:2: Separate the bracket into halves.4: Attached the other half of the bracket to the loudspeaker using the included bolts.1:2:3:4:5:M8 WASHERTO WALLTO CABINETTO WALLTO CABINETM8 WASHER(13MM SPANNER)(14MM SPANNER)M8 BOLTM8 LOCKNUT3SATELLITE WALL SPEAKER

iNSTALL

Designed and Engineered in the UK by HH Electronics LTD. © 2021 HH Electronics Ltd ROTATIONVERTICAL MOUNTINGTILTTo set the loudspeaker rotation, loosen the nut at the bottom of the bracket. Set the required rotation and re-tighten the nut afterwards. To set the loudspeaker tilt, loosen the two nuts indicatedbelow. Set the desired tilt and re-tighten both nuts.445253045SATELLITE WALL SPEAKER

iNSTALL

Designed and Engineered in the UK by HH Electronics LTD. © 2021 HH Electronics LtdHORIZONTAL MOUNTING ROTATIONTILTTo set the loudspeaker rotation, loosen the two nuts indicated below. Set the desired rotation and re-tighten both nuts.To set the loudspeaker Tilt, loosen the nut indicated below. Set the desired rotation and re-tighten the nut.530303020SATELLITE WALL SPEAKER

iNSTALL

Designed and Engineered in the UK by HH Electronics LTD. © 2021 HH Electronics LtdDO NOT MIX LOW IMPEDANCE AND LINE SPEAKERS IN THE SAME SYSTEM.CONNECTIONFor convenience, the TNi Wall mount loudspeaker range are fitted with both with Euro-block and M4 screw input/output terminals. The I/O connections are wired in parallel so can be interchanged if required - please see internal connection diagram below.KEEP ALL SPEAKERS IN THE SAME POLARITY.++

DESIGNED AND ENGINEERED IN THE UK BYWWW.HHELECTRONICS.COMMADE IN CHINA654321123456IMPEDANCE8Ω70V100VOFF80W5W2.5W10W5W20W10W40W20WOFF

TNi-W8 80W Speaker

LINKINPUTFrom AmplifierTo additional CabinetEUROBLOCK CONNECTION INTERNAL CONNECTIONS

From AmplifierTo additional Cabinet+

DESIGNED AND ENGINEERED IN THE UK BYWWW.HHELECTRONICS.COMMADE IN CHINA654321123456IMPEDANCE8Ω70V100VOFF80W5W2.5W10W5W20W10W40W20WOFFTNi-W8 80W SpeakerLINKINPUT

+TERMINAL CONNECTION LINKINPUT+_654321

6SATELLITE WALL SPEAKER

iNSTALL

Designed and Engineered in the UK by HH Electronics LTD. © 2021 HH Electronics Ltd70V/100V line systems have the added advantage of allowing many speakers to be used in the setup using parallel connections. Ensure the cable used is capable of delivering the working current and the ampliﬁer has sufﬁcient drive capacity to support the number of speakers in the system. In the example below, the coil tap is set to 5 Watts, powered by a 100W /100V line ampliﬁer. Each TNi's output level within the system can be set independently based on the location and desired output level.7AMPLIFIER100WCOMMON100VAUDIO OUTPUT

DESIGNED AND ENGINEERED IN THE UK BYDESIGNED AND ENGINEERED IN THE UK BYDESIGNED AND ENGINEERED IN THE UK BYDESIGNED AND ENGINEERED IN THE UK BYWWW.HHELECTRONICS.COMWWW.HHELECTRONICS.COMWWW.HHELECTRONICS.COMWWW.HHELECTRONICS.COMMADE IN CHINAMADE IN CHINAMADE IN CHINAMADE IN CHINA

11111112222233333444445555566666IMPEDANCEIMPEDANCEIMPEDANCEIMPEDANCEIMPEDANCE8Ω8Ω8Ω8Ω8Ω70V70V70V70V70V100V100V100V100V100VOFFOFFOFFOFFOFF80W80W80W80W80W5W5W5W5W5W2.5W2.5W2.5W2.5W2.5W10W10W10W10W10W5W5W5W5W5W20W20W20W20W20W10W10W10W10W10W40W40W40W40W40W20W20W20W20W20WOFFOFFOFFOFFOFF

TNi-W8 TNi-W8 TNi-W8 TNi-W8 TNi-W8 TNi-W8 TNi-W8 TNi-W8 TNi-W8 TNi-W8 TNi-W8 TNi-W8 80W Speaker80W Speaker80W Speaker80W Speaker80W Speaker80W Speaker80W Speaker80W Speaker80W Speaker80W Speaker80W Speaker80W Speaker

INPUT

INPUTINPUT

INPUT

INPUTINPUT

INPUT

INPUTINPUT

INPUT

INPUTINPUT

LINK

LINKLINK

LINK

LINKLINK

LINK

LINKLINK

LINK

LINKLINK To additional Cabinet.HOW MANY SPEAKERS CAN I CONNECT? VOLTAGE TAP SETTINGAMPLIFIER OUTPUTIn the example to the right, the speaker tap is set to 5W (position 4) and the output of the ampliﬁer is a 100W. This would allow for the theoretical maximum connection of up to 20 speakers per channel. Don’t forget to also allow for cable losses. 5W 100W = 20 (total number)20 x 80% = 16(Recommended number of loudspeakers)It is recommended however that systems are designed with 20% spare capacity, so as not to put too much strain on the ampliﬁer, or to allow for the addition of additional cabinets in the future.

SATELLITE WALL SPEAKER

iNSTALL

DESIGNED AND ENGINEERED IN THE UK BYWWW.HHELECTRONICS.COMMADE IN CHINA

11123456IMPEDANCE8Ω70V100VOFF80W5W2.5W10W5W20W10W40W20WOFF

TNi-W8 TNi-W8 TNi-W8 80W Speaker80W Speaker80W Speaker

INPUT

INPUTINPUT

LINK

LINKLINKOPTION 1: 70V LINE SYSTEM TNi-W6 and TNi-W8AMPLIFIERCOMMON70VAUDIO OUTPUT654321123456IMPEDANCE70V100VOFF80W5W2.5W10W5W20W10W40W20WOFF8ΩFive options are available for the 70V line system. Positions 1 to 4 offer variable output levels and the 5th will disable the speaker output. To additional Cabinet.

DESIGNED AND ENGINEERED IN THE UK BYWWW.HHELECTRONICS.COMMADE IN CHINA

11123456IMPEDANCE8Ω70V100VOFF80W5W2.5W10W5W20W10W40W20WOFF

TNi-W8 TNi-W8 TNi-W8 80W Speaker80W Speaker80W Speaker

INPUT

INPUTINPUT

LINK

LINKLINKOPTION 2: 100V LINE SYSTEM TNi-W6 and TNi-W8AMPLIFIERCOMMON100VAUDIO OUTPUTTNi-W4654321123456IMPEDANCE8Ω100VOFF80W5W10W20W40W70V2.5W5W10W20WOFF654321123456IMPEDANCE70V100VOFF80W5W2.5W10W5W20W10W40W20WOFF8ΩAs with the 70V line system, ﬁve options are available for the 100V line system. Positions 1 to 4 offer variable output levels and the 5th will disable the speaker output. To additional Cabinet.Power Modes: Depending on the required output level, and the type of ampliﬁer used to power the system, connections and settings will change. These are summarized below:For safety reasons, it is essential that wiring and connections are installed by a professional only. The length of cable and gauge used are important for optimal performance.8TNi-W4654321123456IMPEDANCE8Ω70V100VOFF60W3W1.5W6W3W15W7.5W30W15WOFF

+_+_

SATELLITE WALL SPEAKER

iNSTALL

Designed and Engineered in the UK by HH Electronics LTD. © 2021 HH Electronics LtdOPTION 3: LOW IMPEDANCE (8Ω) TNi-W4654321123456IMPEDANCE70V100VOFF80W5W2.5W10W5W20W10W40W20WOFFTNi-W6 and TNi-W88ΩIf the ampliﬁer doesn’t have a 70V or 100V line output, the TNi Low Impedance setting is used. In this mode, the TNi cabinet has an input impedance of 8Ω. Depending on the ampliﬁer used, it may be possible to use more than one loudspeaker in this mode. Please check the ampliﬁer speciﬁcation before proceeding.Once the TNi cabinet has been set to low impedance (setting 6 on the rotary selector), DO NOT connect a signal from the 70V/100V line output on the ampliﬁer. Doing this could cause damage to the cabinet, ampliﬁer or both!9654321123456IMPEDANCE8Ω70V100VOFF60W3W1.5W6W3W15W7.5W30W15WOFF

DESIGNED AND ENGINEERED IN THE UK BYWWW.HHELECTRONICS.COMMADE IN CHINA

11123456IMPEDANCE8Ω70V100VOFF80W5W2.5W10W5W20W10W40W20WOFF

TNi-W8 TNi-W8 TNi-W8 80W Speaker80W Speaker80W Speaker

INPUT

INPUTINPUT

LINK

LINKLINKAMPLIFIERCOMMONOUTPUTAUDIO OUTPUT To additional Cabinet.70V/100VAMPLIFIERCOMMONOUTPUTAUDIO OUTPUT70V/100V++++++

DESIGNED AND ENGINEERED IN THE UK BYWWW.HHELECTRONICS.COMMADE IN CHINA666555444333222111123456IMPEDANCE8Ω70V100VOFF80W5W2.5W10W5W20W10W40W20WOFF

TNi-W8 TNi-W8 TNi-W8 80W Speaker80W Speaker80W SpeakerLINKLINKLINKINPUTINPUTINPUT++++++

DESIGNED AND ENGINEERED IN THE UK BYWWW.HHELECTRONICS.COMMADE IN CHINA666555444333222111123456IMPEDANCE8Ω70V100VOFF80W5W2.5W10W5W20W10W40W20WOFF

TNi-W8 TNi-W8 TNi-W8 80W Speaker80W Speaker80W SpeakerLINKLINKLINKINPUTINPUTINPUTLOW IMPEDANCE - PARALLEL CONNECTION - The ampliﬁer will see a combined speaker impedance of 4Ω.Is the ampliﬁer capable of driving into a 4Ω load?AMPLIFIERCOMMONOUTPUTAUDIO OUTPUT70V/100V++++++

DESIGNED AND ENGINEERED IN THE UK BYWWW.HHELECTRONICS.COMMADE IN CHINA666555444333222111123456IMPEDANCE8Ω70V100VOFF80W5W2.5W10W5W20W10W40W20WOFF

TNi-W8 TNi-W8 TNi-W8 80W Speaker80W Speaker80W SpeakerLINKLINKLINKINPUTINPUTINPUT++++++

DESIGNED AND ENGINEERED IN THE UK BYWWW.HHELECTRONICS.COMMADE IN CHINA666555444333222111123456IMPEDANCE8Ω70V100VOFF80W5W2.5W10W5W20W10W40W20WOFF

TNi-W8 TNi-W8 TNi-W8 80W Speaker80W Speaker80W SpeakerLINKLINKLINKINPUTINPUTINPUTLOW IMPEDANCE - SERIES CONNECTION - The ampliﬁer will see a combined speaker impedance of 16Ω.REMEMBER: An ampliﬁer can drive into an impedance higher than its output impedance, but one with a lowerimpedance could cause problems.

+_+_+_

SATELLITE WALL SPEAKER

Other manuals for Tessen TNi-W4

This manual suits for next models

Table of contents

Other HH Electronics Speakers manuals