Hi-ltte RAMBO330 3in1 Series User manual

User Manual
330W 3in1
(Beam-spot wash)

Thanks for choosing RAMBO330 3in1 series products, it is
our newest the latest independent research and development
of a high-grade quality. Compared with other same power 15R
lights, it's more lightweight and convenient, and with perfect
combination of international advanced electronic control
technology and excellent human chemical. 330W beam is In
full compliance with the CE standard supports the international
DMX512 signal control mode.
The newest moving head light used imported Yodn 330W
16R lamp. More brightness than 15R, strong light effect, clear
pattern, fast and smooth pan&tilt running, precise positioning
and uniform pure color high standards of color disc.
15R have a super high and super long distance range, also
has 12 gobos with open circle copper gobo wheel, a frost lens,
14 color with white color wheel, and a prism can quickly zoom.
330W 15R moving head beam lights are widely used in TV
station, large gymnasium, disco, dance halls, nightclubs,
large-scale performances and other professional occasion.
.
.
FORWORD
01
PRODUCT CATALOG
1
2
3
4
5
6
7
8
9
10
11
12
SAFETY TIPS
TECHNICAL PARAMETERS
SCHEMATIC LIGHTING COMPONENTS
PACKING AND SHIPPING
INSTALLATION
AC POWER
FUNCTION
LCD SET
CHANNEL
FAILURE ANALYSIS AND RESOLUTION
CLEAN LAMPS
LIGHT TABLE
3
4
5
6-7
8-9
10
11
12
13
14
14
14
02

◇Before using this product, please observe carefully the product is not unwrap or damage during transportation.
As a result of damage during transporting , please do not use the lights, and contact with the dealer or manufacturer.
◇Before running products, to ensure that the voltage and Hertz in accordance with the requirements of lights.
◇It’s very important, connecting ground wire to avoid the electric shock.
◇This product is for dry indoor environment.
◇This product must be installed on the sufficient space, adjacent to interface the shortest distance of 50 cm,
to ensure that the lights will not crash each other.
◇Before moving or repairing the product , please unplug the power.
◇When it working, ensure that no inflammable and explosive near objects.
◇When installing this product, please use the safety rope. When handling this product, lift the armrest base,
rather than the lamp body.
◇This product is suitable for a maximum temperature of 35 degrees Celsius, when the surrounding environment
is higher than 35 degrees Celsius, please do not use this product.
◇Do not touch. When working, the product running very fast, to prevent bruising hands.
◇Problems happens when operating performances, should immediately stop using the lights.
Do not carry out maintenance, repair damage caused or likely to cause other problems.
Please contact the company's maintenance repair. During the repair process, use the same type of accessories.
◇Please read the instructions carefully, especially regarding the installation, using, maintenance parts.
Important that the lighting in the transport process, must be packed anti-shock protection carton or flight case
SAFETY TIPS
Please read the guide book, the guide book
that contains the installation, use and
maintenance of important information
◇DMX Channel:16/24CHs
◇Control model:DMX512,Auto model
◇LED LCD Display+Press button,English/Chinese,
Diplsay board intelligent flip function.
◇Light Source:Yodn 16R lamp
◇Super fast and ultra silence 3-phase step motots
◇Color temperature is 8000K,life span is 2000Hs.
◇13 Color with white,dual color effect.
◇14 fixed gobo with open circle
◇9 changeable rotating three-dimensional gobo withwhite.
◇Any two-kinds prism stack can combine dynamic effect
positive and negative rotation switching effect.
◇Optical lens: High precision glued optical lens combination
◇Focus: Linear focus
◇Zoom: Linear zoom.
◇Dimmer: 0-100% linear dimmer.
◇Beam angle: 2.5-35 degree.
◇Strobe: two-pieces plate strobe(0.5-9FPS
◇16pcs super silence motors,pan&tilt 3-phase step motors,16bit.
◇Housing: High temperature resistant alloy plastic
◇IP Rate: IP20
◇Weight:18.6KG
◇Size: 361*300.8*601.8mm
Extend ed featur es: support disc onnecti ng
the powe r supply, t he display panel s et up addre ss
code (ha d to pre-eq uipped with batt eries).
1 2 TECHNICAL PARAMETERS
0304
41 0m m
490mm
361m m
300m m
60 1m m

Moving Head Beam light is packaged by carton or standard 2in1
flight case.(selectable 1in1 or 4in1), Random accessories items
shown below
Name
User manual
Signal line
safe rope
Hangin g lamp
hook and f astener
Power line
Quantity
1
1
1
2
1
Unit
piece
piece
piece
piece
piece
34
4.1 Packing
In order to transport it easy to protect the lamp body has two locks
(XY axes each a lock), X-axis has four lock position, Y-axis
triple lock, lock locked in the center position in the transport
and light a vertical position with the arm member
4.2 Transport protection locks
SCHEMATIC LIGHTING COMPONENTS PACKING AND SHIPPING
Pan prot ection lo ck Tilt pro tection l ock Lock pos ition ske tch map
0506
spot rotating gobo wheel：
Gobo：
color：
大红
Red
玫红
Ros e red
白光
Whi te
浅蓝
Lig ht
blu e
蓝色
Blu e
深绿
Dee p
Gre en
黄色
Yel lo w
橙色
Ora ng e
CTO UV
琥珀色
Amb er
绿色
Gre en
深蓝
Dee p
Blu e
深红
Dee p
red
light head cover
top cover
5-pin output
5-pin input
3-pin output
Power switch
power output
control rotating
button
Am cover
LCD Insurance Block
power input
3-pin input

5
1.Disconnect the power supply so that the lamp to cool completely before packaging equipment, at least 15 minutes or more.
2.Closing the light protect lock, when clean the surface of the light dust
3.Cover the light , seize the equipment both sides aluminum handles on to make it upside down and gently placed in the box.
4.Add lighting accessories after placing the light in box.
5.Up to two crates stacked prohibited upside down.
4.3Packing
4
1.Open the box and bag
2.Seizing the equipment handles, lifting and carrying away the light from the box .Or opening the flight case cover，
placing lift boom close to the light base, then equiping light hook on light base bottom.
tightening Quick Install locks. At last rising away boom to the top of the lamp from flight case, put the flight case away.
3.Before turing on the light,should open the light protecting lock
4.4U n p a c k i n g
RAMBO-330W beam moving head lights can be placed on the stage or on a stand in any direction，Quick lock system can
quickly and easily remove or install a light hook.
5.1I n s t a l l a t i n g r i g g i n g
5 . 2 F i x e d e q u i p m e n t
Users should ensure that light and installation materials are checked for regular safety checks, Unprofessional incorrect
installation can lead to dangerous, if the lack of working conditions and professional standards, please operate the light
by professionals. Do not use the light if the working temperature isn't 15°-40° .When the lighting installation, dismantling,
moving, or servicing, do not stand directly beneath the lamp. The operator must ensure that the fixtures are secure
connection, installing the light after professionals approving electrical parameters， make sure that these installation
must be checked at least once per year by experts
Note: must use two clamps fixed equipment, and are 1/4 buckle fastening jig, only fully rotated 90
degrees clockwise to lock fastener.
1. Before installing fixtures， must verified rigging equipments are not damaged,
and can bear at least 10 times of light's weight. Check the building can be beared
at least 10 times of total weights of light, fixture, and cable accessories
2.Insert the locked hook fastener into base mounting holes horizontally, grab the
handle clockwise 90 degrees fasteners, in the same way to install a second fastener,
make sure the fastener is fastened under the light base.
3.If truss can be lifted， the equipment can be directly clamped from flight case
and locked fixture base. Then hung on the light and using safety rope fixed it.
Before rising the light to right height, connect the power cord and
signal cable.
Note: add a safety rope attached the light's base insurance shelf,
do not connect the device handle.
PACKING AND SHIPPING
Note: Upon receipt of lamps, please check if there is damage to the fold closure caused by transport,
where there is transportation damage, please do not use this fixture, and as soon as possible contact
INSTALLATION
safe rop e
0708

7.2 Changing lamp
65
Note: Li ghts be pla ced vertically u pward,t he shorte st distance between
workin g lights mu st be more than or equ al 900mm, l ighting i nstallation
layout a s followi ng
controller is connects to the nearest input XLR 3-pin, then from
the output of the device connects to the input of the next device,
continuous connection one by one, the final output data cable
terminal equipment plug one end into the terminal.
If the signal transmission is long-distance , 512 signal amplifier
must be added. DMX512 signal controller connect to the input of
the amplifier first, then connect to the fixture from its output,
couple with the terminal plug last.
Power :100-240v
Fuse: 8A 5 * 20 main fuse
6.2 Power Connection
Note:
1 Do not install other similar bulbs, otherwise it will produce safety hazards or
equipment damage.
2.To reduce the risk of damage to the light, replacing the lampbefore its life is over
3.Mustn't use the banned scratched and damaged bulb
7.3 Correction bulbs
5.3 Data cable
Data cab le is DMX51 2 signal
Note: Si gnal line c onnections is X- type conn ector。
X-type con nector-----I f the external fle xible cab le or cord
of thisl ight is dam aged, please rep lace prof essiona l cable
or cord fr om the manu facture or its age nt.Ligh ts' DMX
input an d output co nnects to a three- pin
XLR and fi ve-pin XL R insert, first pi n is ground ed,
then neg ative sig nal is
second p in, third p in
connec ts to the pos itive
polari ty signal , fourth and
fifth ar e empty.I n order to
preven t recepti on reflection an d
interf erence co ntrol signal,
a termin al plug mus t be installed
on the fir st branch o f the connected
device l ast 3-pin o utput jack.
1 Do not use two separate output connection, if connec
t the branch separating consecutive DMX512 signal
amplifier must be used to separate.
2 Please use the shielded twisted-pair cable,
standard microphone cable can not be reliably
controlled long-distance data.
6.Fuse Size
If the external flexible cable or cord of this light is damaged, the
line is up to the manufacturer or its service agent or a similar
qualified person to replace, in order to avoid danger. Connect
the power supply personnel must have the appropriate
qualifications before proceeding, you must make sure you are
using the power supply voltage matches the voltage identified
and have overload or leakage protection. Directly connect the
device to the power supply, do not connect to the silicon box
dimming system, otherwise damage to the equipment.
Note: when replacing a lightlamp does not touch the bulb with
bare hands at the ball, avoiding oil stained hands on the ball.
2 When you install and dismantle the lamp into the lamp gently
put on, can not let the bulb hit hard objects around it to prevent
damage the bulbs.
INSTALLATION
1 Disconnect the power, so that the lamp cooling, the arm
of the lamp body lock locked in a horizontal position.
2 split bulbs:Remove thecover which is written “split this
cover to replace the lamp head cover”
3 Use a Phillips screwdriver to remove the fan two thumbscrews
fixed side.
4 with the appropriate force to push down the bulb when the
lamp cup beyond the edge of the
stainless steel shrapnel, taking up the lamp.
5 Install the bulb is the opposite of the operation.
(lamp has been corrected before selling, if the individual case
happens when changing the lamp, could following this way. the
light is reseted by turning on the power,using the menu or console
light bulb to play a bunch of white beam.
2 Using Phillips screwdriver to open the light body one bonnet side
which is printed “this cover to replace the lamp”
3 Using a flathead screwdriver to adjust the lamp bracket adjustment
screw, turn the screw clockwise or counter clockwise, and the
lamp can be right or left to adjust.
AC POWER
900mm 900mm
3XLR pl ug
1.Gro un di ng
2.Sig na l-
3.Sig na l+
Termi na l pl ug c on ne ct w ith XLR
plug se co nd o r th ir d by a 0 .2 5w
120oh m re si st or , th en c onnect
the res is to r in to l as t li ght's DMX
outpu t ja ck
09 10
7.1 Lamp Description
RAMBO330w 3in1 moving head beam light is used with Yodn
Single-ended lamp is short arc point light source, and its color
temperature is 8000K and very stable, CRI＞90.Life span is over
2000 hours(according the using situation)
Attention
1.1. Do not install other similar lamps, and will cause safety
hazards or equipment damage.
2.To reduce the risk of damage to the lamp, replacing the
lamp before the lamp life over.
3. Do not use scratches and has damaged bulb

7 8
8.1Gobo wheel
Metal gobo with 12 gobos, simple
customized is supported.
8.2 Color wheel
8.3 Optical lens focusing
8.4
8.5Dimming and strobe
8.6 Frost
Color wheel is made by14 high standard fixed color, the user can easily
select their own favorite color, to create a perfect lighting effect.
Use the gobo wheel at same time is better.It can be easily transformed
a colorful gobo effect. (According to customer needs may change at any
time own custom various color wheel).
Super silence motors with belt synchronous working,and two sets Adjust
optics lenses to adjust focus from 2.5 degree to 36 degree make perfect
focus function.
clockwise and counterclockwise rotating, speed is adjustable.Prism
wheel can be created a variety of brilliant lighting effects with color
wheel and gobo wheel. Prism wheel through two high-precision
ultra-fast eight-head screw motor spot size adjustment cut prisms,
and creates a wonderful prism dynamic effects.
0-100% mechanical dimmer, you can instantly switch freely adjustable
strobe speed up to 12 times / sec, along with random strobe special
features.
Frost is a piece of atomizing lens, according to the actual control to
complete the frost effect as your want .
Pan:540°，Tilt 270°，With 16BIT precise positioning capabilities.
Horizontal and vertical speed is adjustable.
prism wheel and the prism enlarge
8.7 horizontal and vertical scanning
8.1LCD
FUNCTION LCD SET
1112
spot rotating gobo wheel：
Gobo：
color：
大红
Red
白光
Whi te
蓝色
Blu e
深绿
Dee p
Gre en
橙色
Ora nge
CTO UV
琥珀色
Amb er
深蓝
Dee p
Blu e
深红
Dee p
red
玫红
Ros e red
浅蓝
Lig ht
blu e
黄色
Yel low
绿色
Gre en
8.1Display
1:DMX Address
Address setting, operate touch screen to set the address,thepress
the 6th enter key to save the selected address.
2:! information
Fixture times ,powe ontimes, power on number,lamp on times , lamp on number
3:Setting
1.DMX presets 1.mode1 16CH 2.model 24CH
2.Display Intensity Display brightness 0-255 can optionally from dark to light
3.Display saver Delay 0-600 Screensaver time settings
4.pan Reverse off/on
5.tilt Reverse off/on
6.Blackout pan/tilt off/on
9: internal control
1.Reset Total system Reset
pan/tilt reset
color system reset
gobo system reset
strobe reset
optics reset
3.manual control
4.uto mode1/2/3
5.alibrations
Enter Access Code
Select 003 code then press enter into setting
Pan,tilt,color,static gobe,Rot.gobo, rotating gobo,prism
1 prism rotation, prism 2, prism 2Rotaion,zoom, frost, focus ,immer
Right1 lamp Icon
1 lamp status on/off
2setting lamp on power off/on
7.control mode DMX/AUTO/SOUND
8.Default settings
9.2Menu operating

9CHANNEL
14
0-255: PAN 540 deg ree
0-255: Pan fine
0-255: Tilt 270 de gree
0-255：Pa n fine
0-255: Pan&til t speed adjustme nt
130-13 9 lamp on
140-14 9pan&ti lt reset
150~15 9color wh eel reset
160-16 9gobo whe el reset
170-17 9strobe r eset
180-18 9zoom/f ocus/prism res et
200~20 9comple te reset
230-23 9lamp off
0 white
9 dark red
18 dark bl ue
27 yello w
37 green
46 carmi ne
55 skybl ue
64 red
73 dark gr een
82 amber
91 blue
101 oran ge
110CTO
119 uv
128-12 9 white
130~13 4 dark red
135~13 8 dark blue
139~14 3 yellow
144~147 green
148~15 2carmin e
153~15 7sky blue
158~161red
162~16 6 dark gree n
167-17 1 amber
172-17 6 blue
1: PAN
2: pan: fi ne
3: Tilt
4: tilt: f ine
5: pan/t ilt: spee d
6: funct ion
7: color : wheel
177~18 0 orange
181~18 5 CTO
186~18 9 uv
190~22 0 clockwi se rainbow effec t from fast t o slow
221~22 4 static
225~25 5 anticlo ckwise rainbow e ffect fro m slow to fas t
0-255 co lor wheel f ine
empty
0~3 whit e
4-9 gobo 1
10~15 go bo 2
16~21 go bo 3
22~27 go bo 4
28~33 go bo 5
34~39 go bo 6
40~45 go bo 7
46~51 go bo 8
52~57 go bo 9
58~63 go bo 10
64~69 wh ite 1
70~75 wh ite 2
76~81 wh ite 3
82~87 wh ite 4
88~95 go bo 1 shake
96~103 g obo 2 shake
104~11 1 gobo 3 shak e
112~11 9 gobo 4 shak e
120~12 7 gobo 5 shak e
128~13 5 gobo 6 shak e
136~14 3 gobo 7 shak e
144~15 1 gobo 8 shak e
152~15 9 gobo 9 shak e
160~16 7 gobo 10 sha ke
168~17 5 white 1 sha ke
176~18 3 white 2 sha ke
184~19 1 white 3 sha ke
192~19 9 white 4 sha ke
200~20 1 white
202~22 7 clockwi se from fast to slow
228~22 9 static
230~25 5 anticlo ckwise from slow t o fast
7: color : wheel
8: colou r: wheel( fine: position ing)
9
10: stat ic: gobo: w heel
1-127G obo rotat ing from fast to slo w
128-25 5 gobo rota ting anticlock wise from s low to fast
0-255 au to rotati on fine
0-19 ope n circle
20-49 pr isn 1 stati c
50-75 pr ism rotat ion
76-105 p rism 1 stat ic
106-12 7 prism 2 rot ating
0 static p rism
1-127 cl ockwise f rom fast to slow
128-12 9 static
130-25 5 anticlo ckwise from slow t o fast
0-255 li near fros t
0-255
0-255
0-255
0-255
empty
0-31 str obe off
32-63 st robe on
64-95 st robe from f ast to slow
96-127 strobe on
128-14 3strobe o n from fast to slow
144-15 9shutte r from slow to fast
160-19 1strobe o n
192-22 3 random st robe from slow to fa st
224-25 5strobe o n
0-255 0- 100%
0-255 di mmer fine
12 spot go bo auto rot ating
13 rotat ing gobo po sition
14: pris m
15: pris m: rotati ng
16: fros t
17: zoom
18: zoom : fine
19: focu s
20: focu s: fine
21
22: stro be
23: dimm er
24: dimm er: fine
0 white
1-4 the bi ggest fix ed open circle
5-7spo t gobo 1
8-10 spo t gobo 2
11-13 sp ot gobo 3
14-16 sp ot gobo 4
17-19 sp ot gobo 5
20-22 sp ot gobo 6
23-25 sp ot gobo 7
26-28 sp ot gobo 8
29-31 sp ot gobo 9
32-34 sp ot gobo 1 aut o rotating
35-37 sp ot gobo 2 aut o rotating
38-40 sp ot gobo 3 aut o rotating
41-43 sp ot gobo 4 aut o rotating
44-46 sp ot gobo 5 aut o rotating
47-49 sp ot gobo 6 aut o rotating
50-52 sp ot gobo 7 aut o rotating
53-55 sp ot gobo 8 aut o rotating
56-59s pot gobo 9 au to rotating
60-67 sp ot gobo 1
68-75 sp ot gobo 2
76-83 sp ot gobo 3
84-91 sp ot gobo 4
92-99 sp ot gobo 5
100-10 7 spot gobo 6
108-11 5 spot gobo 7
116-12 3 spot gobo 8
124-12 9 spot gobo 9
130-13 71 spot gob o 1 auto rotating
138-14 5 spot gobo 2 a uto rotating
146-15 3 spot gobo 3 a uto rotating
154-16 1 spot gobo 4 a uto rotating
162-16 9 spot gobo 5 a uto rotating
170-17 7 spot gobo 6 a uto rotating
178-18 5 spot gobo 7 a uto rotating
186-19 3 spot gobo 8 a uto rotating
194-19 9 spot gobo 9 a uto rotating
200-20 1 white
202-22 7gobo clo ckwise from fast t o slow
228-22 9 static
230-25 5 gobo anti clockwise from s low to fast
11: spot :
gobo: wh eel

Listed below is a common approach in the operation of a
few common problems.
◇Fault A: The lamp is not working, the bulb is not lit, the
fan does not work
Solving 1: Check the power supply or the fuse is burned
Solve 2: The main power connector on the voltage detector
◇Fault B: connect control units, lighting does not respond
Solving 1: After connecting control units, lighting should be
working. If it is not working properly, check the signal cable
plugs and wires are connected correctly.
Solve 2: If the lamp is lit display, but the channel does not
respond, check the address code is set correctly and DMX
output voltage polarity.
Solve 3: DMX signal problems if your lighting is off,
check the input terminal and the circuit board
Solve 4: Please change another one DMX controller
Solve 5: Check whether the signal cable near high voltage
power lines caused DMX display board inside the wire
damage.
◇Fault C: some channel is not working
Solving 1: stepper motor may be damaged,
or the line connecting the motherboard burned out
Solve 2: IC driver board on the motherboard may be
damaged
10 11
Must regularly clean the outside of the
optical lens focusing the dust。
Based on the number of lamps use a
clean environment to determine:
Are moist, smoked or the surrounding
environment is particularly dirty, which
can cause dust deposition lamps.
Please use a glass cleaning solution and
a soft cloth to wipe the focusing
optical lens. Carefully Qi dry each
part. At least 20 days to clean the
dust outside a lens, the lens inside
30-60 days to clean up the dust once.
Regular inspection lamp fan and bottom case fan, a fan of at least
20\days to clean up dust deposition. Above cleaning must be
executed in case of power failure.
12
FAILURE SCOREBOARD AND SOLUTIONS CLEAN LIGHTS
330W moving head beam light shine table
deaner
38 22 00 0 1100 0 740 0 510 0
57911
20.2 3 0. 31 0 .3 9 0. 47
PHOTOMETRICS DIAGRAM 2
300 0
14
0.5 9
38 2
PHOTOMETRICS DIAGRAM 38
2
38 1. 22 1 .7 2.1 6 2. 72 3 .3 6
600 00 0 33 000 0 240 00 0 15 000 0 90 00 0