Hi Sharp CT7131 User manual

Thank you for purchasing our product.
Please read this User’s Manual before
using the product. Change without Notice
Long Distance Viewing
Smart Shift IR Camera

2
CONTENT TABLE
CONTENT TABLE…………………………………………..…………………….2
FCC STATEMENT…………………………………………..…………………….3
SAFETY PRECAUTIONS………………………………………............……….4
FUNCTION…………………………………………………………………..........5
Power and Video Output Jack………………………………………………... ..6
Dip functions………………………………………………………………………7
OSD Menu…………………………………………………………………………8
SPECIFICATIONS …….…………………………………………………………14
DIMENSION………………………………………………………………………17

3
FCC STATEMENT
WARNING
This device complies with Part 15 FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received including interference
that may cause undesired operation."
* Federal Communications Commission (FCC) Statement
WARNING
This Equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the ser is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
* You are cautioned that changes or modifications not expressly approved by
the party responsible for compliance could void your authority to operate the
equipment.

4
SAFETY PRECAUTIONS
Please read before using
1. Please read the service manual in details before using.
2. Don't try to disassemble the chassis or the part easily , in case that touch
the power by mistake , is shocked by electricity the danger or caused inside
parts to be damaged.
3. This product is a IP- 67 waterproof camera.
4. Do not attempt to service this unit yourself unless you are authorized to do
so. Opening cover may exposure you to dangerous voltage or other
hazards. Refer all servicing to qualified personnel only.
5. When being regular, please lock the parts firmly first to prevent the machine
damage.
6. Please connect correctly in accordance with the regulation, prevent the
machine from using or striking improperly.
7. Please don't use any organic solution or the corrosively sanitizer to insert
and wipe away the chassis outside. While inserting and wiping away please
turn off the power and use the clean cloth is stained with letting a small
amount of branch water, insert and wipe away appearance.
8. Please don't use the camera under the following abominable environments.
Temperature is lower than -10 degrees Centigrade, or is higher than +50
degrees Centigrade.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of insulated dangerous Voltage within the
product’s enclosure that may be sufficient magnitude to
constitute risk of electrical shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operation and maintenance (servicing) instructions in the
literature accompanying the appliance.

5
FUNCTION
The camera includes auto white balance mode (AWB) auto capture and color
temperature.
The range is 2400°K~9600°K。
SENSOR：Auto Cell Device Sensor, the IR LED would on when night comes to
make up lightness. IR LED would not on in the day, to reduce power
consumption. Illumination is 3.1 LUX (LED on) / 3.7LUX (LED off)。
LENS：Super sensitivity sensor lens .
IR LED：Super power LED IR light

6
Power and video output JACK：
DC JACK is for the power in, it is necessary to use a constant
voltage adapter , F(BNC) JACK is for video output.
Power and video output JACK：
The plug is for the power in, it is necessary to use AC110V~220V, F(BNC)
JACK is for video output.
1. Please use suitable adapter DC12V ± 10 %, 1.5A. Otherwise, this product
will be damaged
2. Please use AC24V ± 10%. Otherwise, this product will be damaged
3. Please use AC110V~240V ± 10%. Otherwise, this product will be damaged

7
DIP functions:
Unscrew the back of the device, the DIP switches can be seen under the cover.
The DIP switches are adjustable and waterproof. The details of the functions
are shown below.
1. Make the camera on the bracket stable.
2. Then connect the 75Ωcoaxial cable to device video in.
3. Put the power cable on.
4. Users may adjust the camera poison and angle in different environment.
OSD keypad illustration:
TypeB
1. N/A
2. D/N, day and night switcher
3. Piranha LED on/off switcher
4. Reflection LED switch on/off
5. Piranha low/high power switch
6. Reflection low/high power switch
7. LED light on/off
8. OSD direction/enter button
TypeA
1. N/A
2. D/N, day and night switcher
3. Piranha LED on/off switcher
4. Laser LED switch on/off
5. Piranha low/high power switch
6. Laser low/high power switch
7. LED light on/off
8. OSD direction/enter button
⑧

8
OSD Menu
1. LENS menu：Select DC LENS model
LENS
DC
BRIGHTNESS: 0 ~100
RETURN

9
2. EXPOSURE menu ：User can adjust electronic shutter speed, auto gain
control, sensitivity-up level, back light compensation (BLC) &Highlight
Suppression (HSBLC) adjust and Digital WDR.
EXPOSURE
SHUTTER
AGC
FLK
,
1/60 ~1/100000
,
X2~256
OFF
,
LOW
,
MIDDLE
,
HIGH
SENS-UP
BLC
D-WDR
RETURN
OFF
,
AUTO
,
X2 ~ X256
,
Return
HSBLC
BLC
LEVEL: 0 ~ 8
LEFT/ RIGHT: 0 ~ 7
WIDTH: 0 ~ 8
TOP/BOTTOM: 0 ~7
HEIGHT: 0 ~ 8
GAIN: LOW
,
MIDDLE
,
HIGH
LEFT/ RIGHT: 0 ~ 7
WIDTH: 0 ~ 8
TOP/BOTTOM: 0 ~7
HEIGHT: 0 ~ 8
INDOOR
OUTDOOR
OFF
DEFAULT
RETUN
DEFAULT
RETURN
OFF

10
3. WHITE BAL menu：User can adjust white balance effect, the function like
as Auto Tracking White balance (ATW), Auto White Balance adjust (AWB),
Indoor or outdoor environment.
4. DAY NIGHT menu：User can adjust camera auto change threshold with day
and night level to change Color or Black/White mode and force assign
Color or Black/White type.
WHITE BAL
A
TW
A
WB
A
WCÆSET
MANUAL
IND
OO
R
OUTDOOR
BLUE 0~100
RED
0
~1
00
RETURN
DAY NI
G
HT
AU
T
O
CO
L
O
R
B
/
W
DELAY
0
~
63
S
–
LEVEL:
0
~ 1
00
E
–
LEVEL:
0
~ 1
00
B
U
R
S
T:
O
N
/O
FF
RET
U
RN
RET
U
RN
EXT

11
5. 3DNR menu：User can adjust 3-Digital Noise Reduction level to improve
night environment effect.
6. SPECIAL menu：User can setup Camera title, Digital effect (Freeze, Mirror,
V-FLIP, Rotate), Gamma ratio, Negative image effect, Motion alarm and
area adjust, Privacy mask area adjust and language function.
3DNR
ON
OFF
LEVEL: 0 ~ 100
RETURN

12
SPECIAL
CAM TITLE
D
–
EFFECT
MOTION
PRIVACY
LANGUAGE
RETURN
ON/OFF
FREEZE On/Off
MIRROR
,
V-FLIP
,
ROTATE
D
–
ZOOM On/Off
GAMM
A
0.05~1.00
NEG. IMAGE On/Off
A
REA SELECT: AERA: 1 ~ 4
A
REA DISPLAY: ON/OFF
LEFT / RIGHT: 0 ~ 100
WIDTH: 0 ~ 100
TOP / BOTTOM: 0 ~ 100
HEIGHT: 0 ~ 100
SENSITIVITY: 0 ~ 40
MOTION VIEW: ON/OFF
A
REA SELECT: AREA: 1 ~ 8
A
REA DISPLAY : ON / OFF
LEFT / RIGHT: 0 ~ 100
WIDTH: 0 ~ 100
TOP / BOTTOM: 0 ~ 100
HEIGHT: 0 ~ 100
COLOR: 0 ~15
ENGLISH
JAPANESE
CHINESE

13
7. ADJUST menu：User can adjust camera sharpness and color parameter.
8. RESET menu：User can reset all camera setting back to factory default.
9. EXIT menu：Exit OSD menu.
ADJUST
SHARPNESS: 0 ~ 31
BLUE: 0 ~ 100
RED: 0 ~ 100
RETURN
RESET
FACTORY RESET
RETURN

14
TypeA – Specifications
Model TypeA-1 TypeA-2
Pick up device 1/3" interline transfer CCD
Total Pixels NTSC:811(H) x 508(V) / PAL:795(H) x 596(V)
Effective Pixels NTSC:768(H) x 494(V) / PAL:752(H) x 582(V)
Resolution 540TV lines
Synchronizing
System
2:1 Internal
Scanning
System
NTSC: 525 Lines / 60 Fields ; PAL: 625 Lines / 50 Fields
S/N Ratio More than 50 dB (AGC OFF)
Electronic
Shutter
Auto 1/60 (1/50) ~1/100,000 sec.
OSD YES
Special function Sense-up, camera title, mirror, D-zoom, privacy, motion,
AWB, AGC
Min.
Illumination
0.35 lux / F2.0 (0 lux IR on), 0.00019 lux (Sens-up, 256X)
Video Output 1.0 Vp-p / 75 ohm composite
IR Distance 40M (34pcs IR LED :
26pcs Piranha /
8pcs Laser)
80M (42pcs IR LED : 36pcs
Piranha /
6pcs Reflection)
IR Trigger 3.1lux / 3.7lux IR On / Off
Lens Type Standard:
Varifocal Lens:9 ~ 22mm
/ F1.6
Optional: Varifocal
Lens:3.5 ~ 12mm / F1.8
(600TV lines)
Standard :Varifocal Lens: 6 ~
50 mm / F1.6
Optional : Varifocal Lens: 9 ~
22 mm / F1.6
Power Source Standard : DC12V±10％
/ 1A / AC 24V
Optional : DC12V±10％
/ 1A
Standard : DC12V ±10% /
1.5 A/ AC 24V
Optional : DC12V ±10% /
1.5 A ; AC 110V~240V
Power
Consumption
DC12V : 9W / AC24V :
8.5W
DC12V : 6.5W
DC12V : 12W / AC24V : 11.5W
DC12V : 6.5W
AC110V : 10W ; AC240V :
10.5W
Current DC12V : 720mA / DC12V : 1A / AC24V : 790mA

15
AC24V : 590mA
DC12V : 530mA
DC12V : 530mA
AC110V :210mA ; AC240V :
120mA
Operating
Temperature
-10℃~ 50℃(14℉~ 122℉)
Storage
Temperature
-20℃~ 70℃(-4℉~ 158℉)
Dimension 88.5(W) x 190(H) x
190(D)mm
100(W) x 203(H) x 222(D)mm
Weight N.W./G.W.: 1.5kg / 1.9kg N.W./G.W.: 1.74kg / 2.15kg
Weatherproof IP67
TypeB – Specifications
Model TypeB-1 TypeB-2
Pick up device 1/3" interline transfer CCD
Total Pixels NTSC:811(H) x 508(V) / PAL:795(H) x 596(V)
Effective Pixels NTSC:768(H) x 494(V) / PAL:752(H) x 582(V)
Resolution 540TV lines
Synchronizing
System
2:1 Internal
Scanning
System
NTSC: 525 Lines / 60 Fields ; PAL: 625 Lines / 50 Fields
S/N Ratio More than 50 dB (AGC OFF)
Electronic
Shutter
Auto 1/60 (1/50) ~1/100,000 sec.
OSD YES
Special function Sense-up, camera title, mirror, D-zoom, privacy, motion,
AWB, AGC
Min.
Illumination
0.35 lux / F2.0 (0 lux IR on), 0.00019 lux (Sens-up, 256X)
Video Output 1.0 Vp-p / 75 ohm composite
IR Distance 40M (34pcs IR LED :
26pcs Piranha /
8pcs Laser)
80M (42pcs IR LED : 36pcs
Piranha /
6pcs Reflection)
IR Trigger 3.1lux / 3.7lux IR On / Off
Lens Type Standard :
Varifocal Lens:9 ~ 22mm
/ F1.6
Standard:
Varifocal Lens: 6 ~ 50 mm /
F1.6

16
Optional : Varifocal
Lens:3.5 ~ 12mm /
F1.8(600TV lines)
Optional:
Varifocal Lens: 9 ~ 22 mm /
F1.6
Power Source DC12V±10％/ 1A DC12V ±10% / 1.5 A
Power
Consumption
6.5W 9W
Current 530mA 710mA
Operating
Temperature
-10℃~ 50℃(14℉~ 122℉)
Storage
Temperature
-20℃~ 70℃(-4℉~ 158℉)
Dimension 88.5(W) x 191(H) x
154(D)mm
100(W) x 203(H) x 167(D)mm
Weight N.W./G.W.: 1.15kg /
1.59kg
N.W./G.W.: 1.4kg / 1.85kg
Weatherproof IP67
Optional
accessory
Power Box for DC12V/AC24V switch or AC110~AC240
switch

17
DIMENSION
TypeA-1
TypeA-2
190

18
TypeB-1
TypeB-2

19
TypeB with Power Box
TypeB-1 with power box TypeB-2 with power box
Power Box Pin defines:
power +
power —
alarm + (N/A)
alarm — (N/A)
audio + (N/A)
audio — (N/A)
video +
video —
85-CT7120-A002G-A