Hi Sharp HS-CC763 User manual

CONTENT TABLE
Thank you for purchasing our product.
Please read this User’s Manual before
using the product. Change without Notice CONTENT TABLE…………………………………………..………………. 2
SAFETY PRECAUTIONS………………………………………................. 3
FUNCTION…………………………………………………………………… 4
SENSOR ……………………………………………..……………. 4
LENS ………………………………………..……………………… 4
IR LENS ………………………………..…………………………... 4
Scaffold….………………………………………………………….. 5
Sunshade………………………….……………………………….. 5
Power and Video Output Jack…………………………………… 5
INSTALL STEP……….. …………………………………………………….. 7
SPECIFICATIONS …….…………………………………………………….. 9
D
IMENSION…………………………………………………………………... 10
2
3D Free Angle IR Camera
SAFETY PRECAUTIONS FUNCTION
Please read before using
1. Please read the service manual in details before using.
2. Don't try to disassemble the chassis or the part easily , in case
that touch the power by mistake , is shocked by electricity the
danger or caused inside parts to be damaged ,
3. This product is a IP- 67 waterproof camera。
4. Do not attempt to service this unit yourself unless you are
authorized to do so. Opening cover may exposure you to
dangerous voltage or other hazards. Refer all servicing to
qualified personnel only.
5. When being regular, please lock the parts firmly first to prevent
the machine damage.
6. Please connect correctly in accordance with the regulation ,
prevent the machine from using , or striking improperly.
7. Please don't use any organic solution or the corrosively sanitizer
to insert and wipe away the chassis outside . While inserting and
wiping away, please turn off the power, and use the clean cloth is
stained with letting a small amount of branch water, insert and
wipe away appearance.
8. Please don't use the camera under the following abominable
environments: Temperature is lower than -10 degrees
Centigrade, or is higher than +50 degrees Centigrade.
3
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of insulated dangerous Voltage within the
product’s enclosure that may be sufficient magnitude
to constitute risk of electrical shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operation and maintenance (servicing) instructions in
the literature accom
p
an
y
in
g
the a
pp
liance.
The camera includes auto white balance mode(AWB)，auto capture
color temperature. The range is 2400°K~9400°K。
SENSOR：Auto Cell Device Sensor, the IR LED would on when night
comes to make up lightness. IR LED would not on in the day,
to reduce power consumption. Illumination is 2.6 LUX (LED
on) / 2.7LUX(LED off)。
LENS：Super sensitivity sensor IRIS (BOARD LENS 6.0mm or other
option lens ).
IR LED：Super power LED IR light，wavelength is 850nm，IR light up
distance up to 15m.
4

INSTALLATION
Notice：The camera lens is already on right focus, user can adjust it
if in need. Please do not open the camera board housing,
otherwise the warranty will be invalid.
8
Power and video output JACK：
DC JACK is for the power in, it is necessary to use a constant
voltage adapter , F(BNC) JACK is for video input.
5 6
Step 1
Remove the base and position
to the desired location.
Step 2
Screw the base
Step 3
body
base
Aim the screw on the body to
the gape on the base.
7
Screw cover Screw 2
Screw 1
Screw 3
Pan-Tilt-Twist (P-T-T) : Adjustable Manual X-Y-Z position
Pan: 360degree rotation
Tilt : 360 degree
Twist : 360 degree rotation (one round only)
Twist:360degree Pan:360degree
Tilt:180degree
DC JACK
DC 12V Power In
F(BNC) JACK VIDEO
Video Output
+-
Step 4
Fix the body into the base
Step 5
Adjust the angel then screw 1,
2, 3 tightly and add the cover
for screw 2

SPECIFICATION DIMENSION
Type 1 Type 2 Type 3
IMAGE SENSOR 1/3” COLOR CCD SENSOR INTERLINE
Total Pixels NTSC:537(H) x 505(V)
PAL:537(H) x 597(V) NTSC:811(H) x 508(V) PAL:795(H) x 596(V)
Effective Pixels NTSC:510(H) x 492(V)
PAL:500(H) x 582(V) NTSC:768(H) x 494(V) PAL:752(H) x 582(V)
Synchronizing
system 2：1 Internal
Scanning system NTSC 525 lines / 60 fields
PAL 625 lines / 50 fields
Video Output 1.0 Vp-p / 75 Ohms composite
Electronic Shutter Auto Electronic Shutter
(1/60~1/100000 sec) NTSC, (1/50~1/100000 sec) PAL
Lens Standard: Board Lens 6.0mm,
Optional: Board Lens 4.3mm
Horizontal
Resolution 420 TV Lines 480 TV Lines
S/N Ration More than 48 dB,AGC OFF
Minimum
Illumination 0.4 lux color
/ F2.0 0.1 lux color
/ F2.0
0.2 lux color
/ F2.0
Auto White Balance 2400°K~9400°K
Weatherproof IP67
IR Distance 15M
(21pcs IR LED) 15M (12pcs IR LED)
IR Trigger 2.6LUX / 2.7LUX IR ON / OFF
X-Y-Z Position Adjustable Manual P-T-T (Pan-Tilt-Twist)
Power Supply 12V DC ±10﹪
Power Consumption 3.8W (Max) 2.52W(Max) 2.64(Max)
Current 320mA (Max) 210mA(Max) 220mA(Max)
Weight N.W./G.W.:0.33kg / 0.46kg
Dimension 74mm x 122.5mm
Operating Temp -10 to 50℃(14 to 122℉)
Storage Temp -20 to 70℃(-4 to 158℉)
Type 1
T
ype 2 & Type 3
10
85-7630-A0090G - C