Hidrotermal HJ-3600RF User manual

HJ-3600RF(Common Anode)
HJ-3600F is a multi-functional RGB LED controller, use the advanced PWM(Pulse-Width modulation) control
technique, built-in 16 kinds of changing mode. Smooth changing effect without flicker; PC engineering plastic
shell, exquisite appearance. The receiver has 8 keys, which are used for namely ON/OFF, PAUSE, MODE+/-,
SPEED+/-, BRT+/-, compatible with RF remote(100m control distance).12-24VDC wide voltage input, 3CH
output(common anode), widely used for all kinds of LEDs with current-limiting resistor, like RGB LED
modules, LED strips, SMD and so on.
1. Technical Specs:
H J -3600RF
LED RGB Controller
•Input Voltage: 12-24VDC
•Max Current Load: 6AX3CH
•Max Output Power: 26W/432W(12V/24V)
•Grey Scale Levels: 4096x4096x4096
•RF Remote Distance: 100m
•Radio Frequency: 433.92MHz
•Remote Output Power: 8mW
•Working Temp.: -30℃~55℃
•Dimensions: L211XW40XH30(mm)
•Package Size: L313XW50XH32(mm)
•Weight(G.W.): 240g
2. Product Size:
Receiver RF Remote Control

ID Learning Method:
Learning ID:
Cancelling
ID:
Sequence Sequence
1 9
210
311
412
513
614
715
816
Note: Brightness is adjustable for static effect, brightness/speed are adjustable for changing effect.
Static Red
8 function keys on the receiver, which is corresponding to the first 8 buttons on the RF remote:
namely ON/OFF, PAUSE, MODE+, MODE-, SPEED+, SPEED-, BRT+, BRT-
Press "ON/OFF" key on the receiver for 3s, the buzzer long beep and the green light will be on ,
release the key, press any button on the remote, when the green light turns off means activated.
Press "ON/OFF" key on the receiver for 5s, the buzzer long beep, the green light will be on and
flash on, meanwhile press any button on the remote, when the green light flashes several times
means ID cancelled (do not release the "ON/OFF" key during the process).
Modes Modes
7 Color Jumping
Red/Green Color Smooth
Red/Blue Color Smooth
Static Green
Static Blue
Static Yellow
Static Purple
White Color Strobe
RGB Smooth
Full Color Smooth
Green/Blue Color Sooth
White Color Smooth
Static Cyan
Static White
RGB Jumping
3. Detailed Key
Other Functions:
A. Press PAUSE in 3s, the buzzer can be on or off.
B. Press MODE+ for 3s to auto loop play all the modes.
C. Press MODE- for 3s to 4 scene modes. merely play the
changing modes, the static color will be skipped.
D. Press SPEED+ for 3s, all speed change is restored to default
status.
E. Press SPEED- for 3s, the current change is restored to default
status.
4. Table Of Changing Modes

5.1 Connected to LED RGB strips:
5.2 Working with power repeater(Connected to LED RGB strips as an example):
5. Wiring Diagram:

7.1 We provide lifelong technical assistance with this product:
- A 5-year warranty is given from the date of purchase. The warranty is for free repair or replacement if
cover manufacturing faults only.
- For faults beyond the 5-year warranty, we reserve the right to charge for time and parts.
7.2 Warranty exclusions below:
- Any man-made damages caused from improper operation, or connecting to excess voltage and
overloading.
- The product appears to have excessive physical damage.
- Damage due to natural disasters and force majeure.
- Warranty label, fragile label and unique barcode label have been damaged.
- The product has been replaced by a brand new product.
7.3 Repair or replacement as provided under this warranty is the exclusive remedy to the customer. We shall
not be liable for any incidental or consequential damages for breach of any stipulation in this warranty.
7.4 Any amendment or adjustment to this warranty must be approved in writing by our company only.
6.1 The product shall be installed and serviced by the qualified person.
6.2 This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please ensure it
is mounted in a water proof enclosure.
6.3 Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
6.4 Please check if the output voltage of the LED power supply used comply with the working voltage of the
product.
6.5 Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current.
Please also ensure that the cable is secured tightly in the connector.
6.6 Ensure all wire connections and polarities are correct before applying power to avoid any damages to the
lights.
6.7 If a fault occurs, please return the product to your supplier. Do not attempt to fix this product by yourself.
6. Attention:
7. Warranty Agreement: