
Controls
0 Power -Will turn the unit
on
or offI Five second hold/ quick push will switch inputs.
E)Track BACKWARDS -Press to restart the current track or to back up to previous tracks.
E)Volume UP -Each press will increase the volume.
eVolume DOWN -Each press will decrease the volume.
0 Track FORWARD -Press to advance to the next track.
Q Map Light I Illumination -Turn
on
Map Light, cycle through illumination settings.
GPLAY I PAUSE -Press once to pause. Press again to
play.
0 Power
@)
f.)Track BACKWARDS
~
c±J
Volume UP E)
0 Volume DOWN 8 Track FORWARD0
~
QMap
Light/ Illumination
~0~
Play/Pause 0
Bluetooth
Devic:e Pairing
The pairing process can vary based on your particular device. Refer to the
operating instructions of your device. Below
is
the general process to connect.
During unit power up, the blue LED on the bottom
of
the control panel will blink
indicating that it is
in
Bluetooth search mode.
During this process "THOR" should show up
in
your list
of
Bluetooth devices when the
search has connected with your device. When the connection is made the blue LED will
change to a solid color.
Once a device has been paired, the unit will reconnect at power up to that device
when
in
range.
To
connect to a different device, the first device will need to be disconnected.
When a phone call is received, the audio signal will mute but not disconnect.
To
switch to 3.5mm press the power button quickly.
To
switch back to BT press the power button again quickly.