High End Systems DL.1 User manual

DL1 User Manual i
User Manual
© High End Systems, Inc. 2004, All Rights Reserved
Information and specifications in this document are subject to change without notice.
High End Systems, Inc. assumes no responsibility or liability for any errors or
inaccuracies that may appear in this manual.
Trademarks used in this text: High End Systems, WholeHog III, Catalyst, the Catalyst
Logo, Dataflash, Intellebeam, and LithoPatterns are registered trademarks; and TalkBack,
the High End Systems globe logo and the Hog logo are trademarks of High End Systems,
Inc. or High End Systems Europe Ltd. Belden is a registered trademark of Belden, Inc.
Mac OS is a trademark of Apple Computer, Inc. registered in the U.S. and in other
countries.
Other trademarks and trade names may be used in this document to refer to either the
entities claiming the marks and names or their products. High End Systems disclaims any
proprietary interest in trademarks and trade names owned by others.
DL.1 User Manual
P/N 60600228 Version 6.0
Printed in the USA
November 2005

ii DL1 User Manual

DL1 User Manual iii
Contacting High End Systems®
US and the Americas
Sales Department: High End Systems, Inc.
2105 Gracy Farms Lane
Austin, TX 78758 USA
voice: 512.836.2242
fax: [phone]
Customer Service: High End Systems, Inc.
2105 Gracy Farms Lane
Austin, TX 78758 USA
voice: 800.890.8989
24-hour fax: [phone]
24-hour voice mail: 512.837.3063 or 800.890.8989
World Wide Web: http://www.highend.com

iv DL1 User Manual
Declaration of Conformity
according to ISO/IEC Guide 22 and EN45104
Manufacturer’s name: High End Systems, Inc.
Distributor’s name: High End Systems, Inc.
Distributor’s address: 2105 Gracy Farms Lane
Austin, Texas 78758 USA
Declares that the product
Product Name: DL.1
Product Number: All
Product Options: All
conforms to the following EEC directives:
73/23/EEC, as amended by 93/68/EEC
89/336/EEC, as amended by 92/31/EEC and 93/68/EEC
Equipment referred to in this declaration of conformity was first manufactured in
compliance with the following standards in 2003:
Safety: EN60950:2000
EMC: EN55022: 1998: Class A ITE
EN61000-3-2
EN61000-3-3
EN55024:1998
EN61000-4-2: Level 3, Class 2
EN61000-4-3: 1995 Level 2 (3V/m)
EN61000-4-4: 1995 Level 2 (1/.5kV)
EN61000-4-5: 1995 Level 3 (2/1kV)
EN61000-4-6: 1965 Level 2 (3Vrms)
EN61000-4-11:1994
USA, Thursday, November 17, 2005
Kenneth Stuart Hansen, Compliance Engineer

DL1 User Manual v
Product Modification Warning
High End Systems products are designed and manufactured to meet the
requirements of United States and International safety regulations. Modifications to
the product could affect safety and render the product non-compliant to relevant
safety standards.
Mise En Garde Contre La Modification Du Produit. Les produits High End
Systems sont conçus et fabriqués conformément aux exigences des règlements
internationaux de sécurité. Toute modification du produit peut entraîner sa non
conformité aux normes de sécurité en vigueur.
Produktmodifikationswarnung. Design und Herstellung von High End
Systems entsprechen den Anforderungen der U.S. Amerikanischen und
internationalen Sicherheitsvorschriften. Abänderungen dieses Produktes können
dessen Sicherheit beeinträchtigen und unter Umständen gegen die diesbezüglichen
Sicherheitsnormen verstoßen.
Avvertenza Sulla Modifica Del Prodotto. I prodotti di High End Systems sono
stati progettati e fabbricati per soddisfare i requisiti delle normative di sicurezza
statunitensi ed internazionali. Qualsiasi modifica al prodotto potrebbe pregiudicare
la sicurezza e rendere il prodotto non conforme agli standard di sicurezza pertinenti.
Advertencia De Modificación Del Producto. Los productos de High End
Systems están diseñados y fabricados para cumplir los requisitos de las
reglamentaciones de seguridad de los Estados Unidos e internacionales. Las
modificaciones al producto podrían afectar la seguridad y dejar al producto fuera de
conformidad con las normas de seguridad relevantes.
FCC Information
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his
own expense.

vi DL1 User Manual
Important Safety Information
Instructions pertaining to continued protection against fire, electric shock, and injury
to persons are found in Appendix A. Please read all instructions prior to assembling,
mounting, and operating this equipment.
Important: Informations De Sécurité. Les instructions se rapportant à la
protection permanente contre les incendies, l’électrocution, excessif et aux blessures
corporelles se trouvent dans l’Annexe A. Veuillez lire toutes les instructions avant
d’assembler, de monter ou d’utiliser cet équipement.
Wichtige Sicherheitshinweise. Sicherheitsanleitungen zum Schutz gegen
Feuer, elektrischen Schlag, und Verletzung von Personen finden Sie in Anhang A. Vor
der Montage, dem Zusammenbau und der Intbetriebnahme dieses Geräts alle
Anleitungen sorgfältig durchlesen.
Informazioni Importanti Di Sicurezza. Le istruzioni sulla protezione da
incendi, folgorazione, e infortuni sono contenute nell’appendice A. Si prega di
leggere tutte le istruzioni prima di assemblare, montare e azionare l’apparecchiatura.
Informacion Importante De Seguridad. En el Apéndice A se encuentran
instrucciones sobre protección continua contra incendios, descarga eléctrica, y
lesiones personales. Lea, por favor, todas las instrucciones antes del ensamblaje,
montaje y operación de este equipo.
Symbols
The following international caution and warning symbols appear in margins
throughout this manual to highlight messages.
Caution: This symbol appears adjacent to Caution messages. Not heeding
these messages could result in personal injury and/or damage to
equipment.
Warning: This symbol appears adjacent to high voltage warning messages.
Not heeding these messages could result in serious personal
injury.
Minimum focus distance to non-flammable surface. In this case, 1
meter .
Do not mount on a flammable surface.
Equipment surfaces may reach temperatures up to 130° C (266° F).
Allow the fixture to cool before handling.

DL1 User Manual vii
Patents
This product may use one or more of the following patents:
US 4,392,187; US 4,602,321; US 4,688,161; US 4,701,833; US 4,709,311; US 4,779,176;
US 4,800,474; US 4,962,687; US 4,972,306; US 4,980,806; US 5,010,459; US 5,031,078;
US 5,073,847; US 5,078,039; US 5,186,536; US 5,209,560; US 5,278,742; US 5,282,121;
US 5,307,295; US 5,329,431; US 5,331,822; US 5,367,444; US 5,402,326; US 5,430,629;
US 5,432,691; US 5,454,477; US 5,455,748; US 5,506,762; US 5,515,254; US 5,537,303;
US 5,545,951; US 5,580,164; US 5,590,954; US 5,590,955; US 5,640,061; US 5,647,662;
US 5,665,305; US 5,691,886; US 5,728,994; US 5,758,955; US 5,758,956; US 5,769,527;
US 5,774,273; US 5,798,619; US 5,806,951; US 5,823,661; US 5,825,548; US 5,828,485;
US 5,829,868; US 5,857,768; US 5,882,107; US 5,934,794; US 5,940,204; US 5,945,786;
US 5,953,152; US 5,980,066; US 6,048,080; US 6,327,103; US 6,048,081; US 6,057,958;
US 6,054,816; US 6,126,288; US 6,142,652; US 6,142,653; US 6,172,822; US 6,188,933;
US 6,208,087; US 6,219,093; US 6,220,730; US 6,241,366; US 6,249,091; US 6,255,787;
US 6,256,136; US 6,278,542; US 6,278,545; US 6,288,828; US 6,327,103; US 6,331,756;
US 6,346,783; US 6,421,165; US 6,430,934; US 6,459,217; US 6,466,357; US 6,502,961;
US 6,545,586; US 6,600,270; US 6,635,999; US 6,664,745; US 6,693,392; US 6,719,433;
US 6,783,251; US 6,812,653; US 6,866,390; US 6,866,402; US 6,866,451; US 6,869,193;
US 6,570,348; US 6,575,577; US 6,605,907; US 6,621,239; US 6,8691,239; US 6,930,456;
US 6,955,435; US D347,113; US D350,408; US D359,574; US D360,404; US D365,165;
US D366,712; US D370,080; US D372,550; US D377,338; US D381,740; US D409,771;
EP 0662275; EP 0767398; DE 621495; DE 655144; DE 797503; EP 0475082;
GB 2 043 769 B; GB 2 055 842 B; GB 2 283 808 B; GB 2 290 134 B; GB 2 291 814 B;
GB 2 292 530 B; GB 2 292 896 B; GB 2 294 909 B; GB 2 295 058 B; GB 2 303 203 B;
GB 2 306 887 B; GB 2 307 036 B; GB 2 316 477 B; MR0862-1996; M9,604,224.9
Warranty Information
Limited Warranty. Unless otherwise stated, your product (excluding the lamp) is
covered by a one year parts and labor limited warranty. The lamp carries a 30-day
warranty. It is the owner’s responsibility to furnish receipts or invoices for
verification of purchase, date, and dealer or distributor. If purchase date cannot be
provided, date of manufacture will be used to determine warranty period.
Fog machine warning. Like all high quality video projection units, the DL.1
fixture must be kept protected from excessive amounts of glycol fog, mineral oil, and
smoke. DL.1 incorporates two-stage air filtering to reduce these risks to a minimum;
however, the user must follow these guidelines to ensure continued operation of the
fixture:
• Air filters (both fixture and projector) should be checked and cleaned on a
regular basis. When used in a closed or fixed environment where fog or haze is
used, we recommend at least a weekly check.

viii DL1 User Manual
• Do not situate DL.1 in areas of high fog density such as directly in front of a fog
machine or mineral oil hazer.
• Minimize the exposure of DL.1 to both glycol fog and mineral oil.
DL.1 is a highly complex and sensitive electro-optical device and care and thought in
how it is used, rigged, and positioned will maximize the product’s life and your
investment.
Failure to follow these guidelines and carry out regular maintenance will void the
warranty.
Returning an Item Under Warranty for Repair. It is necessary to obtain a
Return Material Authorization (RMA) number from your dealer or point of purchase
BEFORE any units are returned for repair. The manufacturer will make the final
determination as to whether or not the unit is covered by warranty.
Any Product unit or parts returned to High End Systems must be packaged in a suitable
manner to ensure the protection of such Product unit or parts, and such package shall be
clearly and prominently marked to indicate that the package contains returned Product
units or parts and with an RMA number. Accompany all returned Product units or parts
with a written explanation of the alleged problem or malfunction. Ship returned Product
units or parts to: 2105 Gracy Farms Lane, Austin, TX 78758 USA.
Note: Freight Damage Claims are invalid for fixtures shipped in non-factory boxes
and packing materials.
Freight. All shipping will be paid by the purchaser. Items under warranty shall have
return shipping paid by the manufacturer only in the Continental United States. Under no
circumstances will freight collect shipments be accepted. Prepaid shipping does not
include rush expediting such as air freight. Air freight can be sent customer collect in the
Continental United States.
REPAIR OR REPLACEMENT AS PROVIDED FOR UNDER THIS WARRANTY IS THE
EXCLUSIVE REMEDY OF THE CONSUMER. HIGH END SYSTEMS, INC. MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO ANY PRODUCT, AND
HIGH END SPECIFICALLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. HIGH END SHALL NOT BE LIABLE FOR
ANY INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGE, INCLUDING LOST
PROFITS, SUSTAINED OR INCURRED IN CONNECTION WITH ANY PRODUCT OR
CAUSED BY PRODUCT DEFECTS OR THE PARTIAL OR TOTAL FAILURE OF ANY
PRODUCT REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT,
TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, AND
WHETHER OR NOT SUCH DAMAGE WAS FORESEEN OR UNFORESEEN.
Warranty is void if the product is misused, damaged, modified in any way, or for
unauthorized repairs or parts. This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.

DL1 User Manual ix
What You Should Know About Copyright
Written By Suzy Vaughan Associates for High End Systems
I want to use a film clip from "When Harry Met Sally" in a promotional piece
advertising my services. What do I have to do to be able to do that? First of all, you need
to obtain permission to use the clip from its owners. The clip is considered intellectual
property, just as though it were your car or some software code developed by and
belonging to Microsoft. This is because the U.S. Copyright Act gave creators of literary
works (which include books, films, television programs, art works, still photos and
musical compositions and recordings) the right to sell or license these works and to make
money from them for the period of the copyright.
But what about public domain material? I heard that lots of material is in the public
domain and can be used for free. Once the copyright runs out, the creative work falls into
the public domain and can be used freely by anyone without payment or licensing. If the
work is not public domain, it is considered literary property. The Copyright Act provides
substantial penalties for copyright infringement ranging from $10,000 for accidental
infringement to $250,000 for willful infringement. However, contrary to popular belief,
there really is not that much material in the public domain so this approach will limit you
creatively.
What if I want to use a clip in a public performance? It's not being filmed or taped.
Surely I don't need permission for that? Public gatherings require clearance whenever
copyrighted data is projected to audiences, or for any use other than just personal
viewing. Concerts, tradeshows, industrial shows, parties and raves are all examples of
public performance and permission must be obtained.
Suppose I want to use a still photo or a magazine cover or a television clip? Do I have to
obtain permission for them too? Yes, they are also copyrighted works, whose owners
must grant a license for their usage.
Do I need any other permissions to use this material? In many cases you do. You may
need to obtain permission to use the appearance of actors who appear in the clip as well
as pay the writers and directors of the film that your clip comes from.
What about music? I hear you can use 8 bars for free. 8 bars for free is a fallacy that has
been passed around as a fact for a long period of time. However, it isn't true. Both musical
compositions and records require licensing and payment.
What about High End Systems material included with the Catalyst? Do I have to clear
that? No. High End Systems has worked to provide clearance for the content that is
provided with the Catalyst system. Any materials you received directly from HES with the
purchase of a new Catalyst system have already been properly licensed for your use in
shows and presentations. That does not, however, license you to sell this content
separately from the Catalyst system. Also, please be sure that any new content you obtain
from outside sources is properly cleared for public presentation.

xDL1 User Manual
This sounds really difficult and I don't know how to do it? What do I do to properly
license copyrighted material?
You need to consult with a Content Clearing House or with a properly licensed Intellectual
Property Attorney. Content clearinghouses are typically less expensive to work with and
have well established industry relations that can result in cost savings. High End Systems
uses and highly recommends Suzy Vaughan Associates. Suzy Vaughan Associates has 20
years of experience in clearing clips, talent, and music for use in any number of venues.
Their clients include Barbara Streisand, Michael Jackson, and The Emmys among other
shows.
You can obtain more information about Suzy Vaughan Associates' services by calling 818-
988-5599 or emailing [email protected]. Their website is www.suzyvaughan.com.
Suzy Vaughan is also an attorney specializing in intellectual property issues.
How much does it typically cost to license copyrighted material?
The answer depends entirely on what material you want to use and how you plan to use it.
Prices can range from hundreds of dollars for photography content to thousands of
dollars for a highly desirable film/video clip. Since price is content-sensitive, the best
thing to do is to contact a clearinghouse like Suzy Vaughan Associates and let them find
out for you.

DL.1 User Manual 3
Table of Contents
Contacting High End Systems® ................................................................................................... -ii
Product Modification Warning ....................................................................................................-iv
FCC Information ........................................................................................................................... -iv
Important Safety Information ....................................................................................................... -v
Symbols .......................................................................................................................................... -v
Patents ........................................................................................................................................... -vi
Warranty Information................................................................................................................... -vi
What You Should Know About Copyright ................................................................................ -viii
Table of Contents.......................................................................................................................... -ix
List of Figures..............................................................................................................................-xiii
Chapter 1: Features and Specifications
Features ........................................................................................................................................ 1-1
Operation............................................................................................................................... 1-1
Optional Camera System...................................................................................................... 1-2
Optional Accessories ................................................................................................................... 1-2
Specifications ............................................................................................................................... 1-3
Physical Specifications .........................................................................................................1-3
Electrical Specifications .......................................................................................................1-4
Projector Specifications........................................................................................................1-4
Environmental Specifications .............................................................................................. 1-4
Cable and Connector Specifications.................................................................................... 1-5
Video Connectors:.......................................................................................................... 1-5
DMX and RS-485 Projector Link .................................................................................. 1-5
Chapter 2: Setup and Configuration
Unpacking the Fixture................................................................................................................. 2-1
Replacing the Power Cord Cap................................................................................................... 2-1
Installing a Line Cord Cap - U.K. Only................................................................................ 2-2
Vatic Fitter Heads Information - Danmark ......................................................................... 2-2
Connecting Video......................................................................................................................... 2-2
Mounting the Fixture................................................................................................................... 2-4
Recommended Mounting Orientation................................................................................. 2-4
Fog Machine Warning .......................................................................................................... 2-4
Mounting the Fixture Upright.............................................................................................. 2-5
Truss Mounting.............................................................................................................. 2-5
Verifying the Truss Support.......................................................................................... 2-5
Clamps ............................................................................................................................ 2-5
Mounting Procedure...................................................................................................... 2-6
Linking the Fixtures..................................................................................................................... 2-7
Data Cabling and Connectors .............................................................................................. 2-7

4DL.1 User Manual
DMX Data Cables .......................................................................................................... 2-7
Cable Connectors........................................................................................................... 2-7
Setting up the Link ............................................................................................................... 2-8
Installing a Terminator.........................................................................................................2-9
Powering On the Fixture ............................................................................................................. 2-9
Homing the Fixture............................................................................................................... 2-9
Viewing the Display Panel ................................................................................................. 2-10
Verifying and Uploading Fixture Software.............................................................................. 2-10
Setting the DMX Start Channel................................................................................................ 2-11
Shutting Down the Fixture........................................................................................................ 2-12
Locking Pan and Tilt Positions .......................................................................................... 2-12
Chapter 3: Fixture Operation
TalkBack™ Support for Remote Access..................................................................................... 3-1
The Menu Display........................................................................................................................ 3-2
Navigational Basics............................................................................................................... 3-2
Display in Menu Locked Mode ............................................................................................ 3-3
Fixture Software Version .............................................................................................. 3-3
System Configuration Type........................................................................................... 3-3
DMX Start Channel ....................................................................................................... 3-3
Error Message Display .................................................................................................. 3-3
Unlocking the Menu System................................................................................................ 3-3
Exiting the Menu System ..................................................................................................... 3-3
Menu Map.............................................................................................................................. 3-4
Menu Option Descriptions .......................................................................................................... 3-6
DMX Address Menu ............................................................................................................. 3-6
Setting a DMX Start Channel ....................................................................................... 3-6
Set Parameters Menu ........................................................................................................... 3-6
Factory Default Settings................................................................................................ 3-6
Pan/Tilt Swap ................................................................................................................. 3-7
Pan Invert ....................................................................................................................... 3-7
Tilt Invert........................................................................................................................ 3-7
Display Level.................................................................................................................. 3-8
Data Loss Timeout ......................................................................................................... 3-8
Projector Input Source .................................................................................................. 3-8
Projector Default? .......................................................................................................... 3-9
Reset Projector Hours.................................................................................................... 3-9
Striking the Projector Lamp........................................................................................ 3-10
Projector In By DMX?.................................................................................................. 3-10
Iris Version ................................................................................................................... 3-10
Zoom Override Menu .................................................................................................. 3-11
Focus Override Menu .................................................................................................. 3-11
Projector Control ......................................................................................................... 3-11

DL.1 User Manual 5
Camera Option ............................................................................................................. 3-12
Align Pan Motors ......................................................................................................... 3-13
New Air Filter............................................................................................................... 3-13
Fixture Mode Menu ........................................................................................................... 3-14
Crossloading Fixture Software ................................................................................... 3-14
Test Options Menu.............................................................................................................. 3-15
Homing the Fixture...................................................................................................... 3-15
Copying the Boot Code................................................................................................ 3-15
Self Test Menu ............................................................................................................. 3-16
Information Menu .............................................................................................................. 3-16
Unique Number............................................................................................................ 3-16
DMX Values Menu....................................................................................................... 3-17
Temperatures Menu..................................................................................................... 3-17
Fixture Hours ............................................................................................................... 3-18
Fixture Hours Reset..................................................................................................... 3-18
Lamp Hours.................................................................................................................. 3-18
Projector Status............................................................................................................ 3-18
Projector Hours Reset.................................................................................................. 3-18
Software Version.......................................................................................................... 3-18
Module Versions Menu................................................................................................ 3-18
Display Errors .............................................................................................................. 3-19
Chapter 4: DMX Programming
DMX Programming Overview .................................................................................................... 4-1
8-bit vs. 16-bit DMX.............................................................................................................. 4-1
Lighting Consoles ................................................................................................................. 4-1
Fixture Libraries ............................................................................................................ 4-1
DMX Output Displays ................................................................................................... 4-2
16-bit DMX ..................................................................................................................... 4-2
Parameter Descriptions............................................................................................................... 4-3
Standard Movement and Projection Controls .................................................................... 4-3
Pan and Tilt ....................................................................................................................4-3
Dimming Iris .................................................................................................................. 4-3
Focus............................................................................................................................... 4-3
Zoom............................................................................................................................... 4-3
MSpeed (Motor Speed) ................................................................................................. 4-3
Control Function Options.............................................................................................. 4-4
Changing Projector Source Input................................................................................. 4-5
Camera System Control ....................................................................................................... 4-6
Camera Zoom................................................................................................................. 4-6
Camera Focus................................................................................................................. 4-6
IR Illuminator ................................................................................................................. 4-6
Camera Shutter .............................................................................................................. 4-6

6DL.1 User Manual
White Balance ................................................................................................................ 4-6
Orientation .....................................................................................................................4-6
Camera Effects............................................................................................................... 4-6
DL.1 Protocol Tables ................................................................................................................... 4-7
Standard DL.1 Protocol ........................................................................................................ 4-7
Enhanced DL.1 Protocol....................................................................................................... 4-8
Chapter 5: General Maintenance and Troubleshooting
Maintaining the Filtering System ............................................................................................... 5-1
Replacing Parts ............................................................................................................................ 5-2
Replacing Filters ................................................................................................................... 5-2
Recalibrating the Filter System: .......................................................................................... 5-3
Replacing the Lamp ..............................................................................................................5-3
Replacing the Fuse................................................................................................................ 5-5
Cleaning or Replacing the Front Window........................................................................... 5-6
Replacing a Driver Board ..................................................................................................... 5-7
Replacing 2-Phase Board...................................................................................................... 5-8
Replacing 3-Phase or CPU Board ........................................................................................ 5-8
General Troubleshooting............................................................................................................. 5-9
LED States............................................................................................................................. 5-9
General Troubleshooting Suggestions .............................................................................. 5-12
Appendix A: Safety Information
Appendice A : Importantes Informations Sur La Sécurité.................................................A-2
Anhang A: Wichtige Hinweise Für Ihre Sicherheit ............................................................A-3
Apéndice A: Información Importante De Seguridad..........................................................A-4
Appendice A: Importanti Informazioni Di Sicurezza.........................................................A-5
Vigtig Sikkerhedsinformation..............................................................................................A-5
Appendix B: MSpeed Conversion Table

DL.1 User Manual 7
List of Figures
Figure 1-1: DL.1 Fixture Dimensions ................................................................................ 1-3
Figure 2-1: Video Connectors ............................................................................................. 2-2
Figure 2-2: RGBHV Connectors ......................................................................................... 2-3
Figure 2-3: Attaching the Mounting brackets ................................................................... 2-6
Figure 2-4: Truss Mounting ................................................................................................ 2-6
Figure 2-5: XLR 5-pin connector ........................................................................................ 2-8
Figure 2-6: Linking DL.1 Fixtures ...................................................................................... 2-8
Figure 2-7: Data cable terminator ...................................................................................... 2-9
Figure 2-8: The DL.1 menu system navigation buttons ................................................. 2-11
Figure 2-9: Pan and Tilt Locks ......................................................................................... 2-12
Figure 3-1: DL.1 fixture front panel display ...................................................................... 3-2
Figure 3-2: DL.1 key map ................................................................................................. 3-11
Figure 3-3: Reading the DMX Values Menu Display ..................................................... 3-17
Figure 5-1: Replacing the Projector Filter ......................................................................... 5-2
Figure 5-2: Replacing the HEPA Filter .............................................................................. 5-3
Figure 5-3: Replacing the Fuse ........................................................................................... 5-5
Figure 5-4: Cleaning or Replacing the Front Window ...................................................... 5-6
Figure 5-5: Driver Board Configurations .......................................................................... 5-7
Figure 5-6: DL.1 Rear Gasket ............................................................................................. 5-8
Figure 5-7: Accessing CPU and 3-phase boards. .............................................................. 5-8
Figure 5-8: Addressing screw and LED locations. .......................................................... 5-11

8DL.1 User Manual

DL.1 User Manual Features and Specifications 1-1
1
Chapter 1:
Features and Specifications
The DL.1 (Digital Light 1) fixture merges video projection and automated lighting
technologies with a DMX controllable video light engine housed in a moving yoke
fixture. DL.1 itself doesn't generate images; it is a mechanical means of displaying
video images onto a stage with automated control of zoom, focus, and other video-
related parameters. DL.1 fixtures can be used in conjunction with the Catalyst Media
Server and Catalyst Version 3.0 software, or alone to project images from DVDs,
videos and other compatible media.
The optional Camera System provides a fully equipped digital camera and IR
illuminator to project live video on its local unit or another DL.1 fixture through an
ethernet link. Combining camera and light from the same source allow for a unique
point of view. Camera features include optical and digital zoom, frame rate and invert
effects. Combining the camera with IR illuminator allows focus and fading in
blackout situations. The ability to point the camera at it’s own projection and
adjusting zoom creates unique realtime video feedback and “hall of mirrors” effects.
This manual gives you information about the setup, operation and maintenance of
the DL.1 fixture. For additional information specific to the projector housed in the
DL.1 including projector maintenance, onboard menu and troubleshooting, see the
projector’s user manual shipped with your fixture.
Features
Operation
• DMX512 compatible control (pan, tilt, dimming iris, zoom, focus, and others)
• High resolution stepper motors (180,000 steps per revolution) to provide smooth,
16-bit movement control
• 400° pan, 270°tilt
• Variable 100–200V, 50/60Hz or 200-240V, 50/60Hz power input
• On-board menu system with dot matrix display
• Accepts RGBHV, VGA, S-Video inputs
• TalkBack™ protocol—standard in High End Systems automated luminaires,
provides bi-directional communication to electronic feedback on sensor function,
lamp life, and other details needed for maintenance purposes.

1-2 Features and Specifications DL.1 User Manual
Optional Camera System
• Captures digital video in light or dark settings and inputs directly into the graphic
engine.
• Optical + digital zoom can increase image upto 216×
• Scalable infrared output
• Built-in real-time video effects including:
—Options for 1–30 frame captures / sec
—Vertical and Horizontal image invert
—B and White, Color Negative and Freeze Frame
Optional Accessories
The following table lists accessories available for the Catalyst system from your High
End dealer/distributor. For more information, contact your High End Systems dealer/
distributor or see “Contacting High End Systems®” on page ii.
Part Description Part Number
Replacement air filter 80260014
5 amp, slow-blow fuse 90403012
Pan belt 99360038
Tilt belt 99360039
Front window 80530074
Camera System module 60040003
Digital Media Server 56020001
Wholehog III lighting console 61020001
LCD Monitor 56070009
Galvanized safety cable 12040001
Cheeseborough clamp 55040014
Lightwave Research Upload Dongle 26040002
Male 5-pin DMX terminator 90404039
Heavy duty 5-pin XLR cable (10’) 55050017
Heavy duty 5-pin XLR cable (25’) 55050018
Heavy duty 5-pin XLR cable (50’) 55050019
Heavy duty 5-pin XLR cable (100’) 55050020
User Manual 60600228

DL.1 User Manual Features and Specifications 1-3
1
Specifications
Physical Specifications
Figure 1-1 shows the DL.1 fixture as shipped:
Dimensions: 861mm × 595mm × 343mm
33.9in. × 23.4in. × 13.5 in.
Weight: 39 kg (85 lb)
305mm
538mm
176mm
343mm
512mm
595mm
445mm
861mm
Figure 1-1 DL.1 Fixture Dimensions

1-4 Features and Specifications DL.1 User Manual
Electrical Specifications
Warning: Class I equipment – This equipment must be earthed
Input ratings: 100—120V 6.8A 50/60Hz, 200—240V 3.4A 50/60Hz
Power factor: 0.94
Fuse: Power supply output fuse: 5A, 250V slow blow only.
Lamp: M275W NS4 POA-LMP47
Light Output: 4500 ANSI lumens
Lamp Life: 2000 hours
Projector Specifications
Aspect ratio: 4:3 native, 5:4 and 16:9 supported
Brightness uniformity: 95%
Contrast ratio: 800:1, full on/full off
Data compatibility: SXGA, XGA, SVGA, VGA, and Macintosh
Display technology: 1.3” TFT active matrix, 3 panels
Scanning frequency: H-sync, 15—100kHz; V-sync, 50—100Hz
Panel resolution: 1024 x 768 dots
Horizontal resolution: 800 TV lines (HDTV)
Projection lens: F=1.7—2.0 f=48.2mm~62.6mm
Zoom Lens Throw Ratio: 1.8 - 2.4:1
V-Sync range: 50—100Hz
Minimum focus distance to non-flammable surface: 1.4 m (4.6 ft)
Video compatibility: NTSC, NTSC4.43, PAL, PAL-M, PAL-N, SECAM, HDTV (1080i,
1035i, 720p, 480i, 480p, 575i, 575p)
Number of colors: 16.7 million
Environmental Specifications
Maximum ambient temperature (Ta): 35° C (95° F)