Highstar ICAMP User manual

Instruction manual
Welcome to choose HIGHSTAR company product
ICAMP BLUETOOTH SPEAKER WITH NIGHT
LIGHT. The product is a portable audio with Bluetooth
receiver. You can store the songs in mobile phone or
device with Bluetooth playback, and then transmit to this
product for music playback via Bluetooth.
Read the instruction manual quickly before use.
A.MainfeaturesandTechnicalParameters
1. Bluetooth audio player
2. Handfree function
3. Φ3.5mm audio input interface
4. Audio Max power：5W*1
5. Frequency response: 20Hz-20kHz
6. Max. power consumption: 1W
7. Power supplied: built-in rechargeable lithium battery
8. Connect external USB DC 5V power source to charge the unit
9. Charging time : around 3-4 hours
10.Continue playing music about 6-8 hours when built-in lithium
battery is fully charged.
11. Continue for Nightlight about 10 hours when built-in lithium
battery is fully charged.
12. LED Bluetooth/line in indicator and power charge indicator
13. Water resistance level: IPX4
B.ProductIllustration






C.Keyfunctions
No Current
mode
Function
operating Button Operation Indicator
1 Power off Power on Long press for 2
seconds
Status Indicator
is ON
2 Power on Power off Long press for 5
seconds
Status Indicator
is OFF
3 Power on Bluetooth
pairing manually paired
blue status
indicator is
flashing
rapidly
4 Power on
Bluetooth pair
successfully Automatically paired
blue status
indicator is
flashing
slowly
5 Power on Call back Double click
twice
6 Call mode Answer call Short press once
7 Call mode Reject call Long press
8 Talk mode End call Short press once
9 Bluetooth
mode Volume up Long Press
10 Bluetooth
mode Volume down Long Press
11 Bluetooth
mode
Previous
son
g
Short Press once
12 Bluetooth
mode Next song Short Press once
13 Bluetooth
mode pause/play/mute Short press circle
14 Any mode Charging Red charging
indicator is ON
15 Any mode Battery is full
Red charging
indicator is Off
and change to
green
16 Bluetooth
mode Audio input
Audio cable is
plug into the
audio input
Green status
indicator is ON
17 Audio
mode
Bluetooth
mode Unplug The audio cable
Blue status
indicator is ON
18 Any mode Night light
ON/OFF
Short press circle
19 On Mode Dimmer
Long press
The brightness
in ascending or
descending
regulation.
D.Bluetoothplayback
1. Long press “”for 2 seconds for power ON to Bluetooth
speaker. Blue status indicator is ON. Please don’t plug the audio
cable into the line- in jack when Bluetooth playback.
2. Turn on your cell phone or Bluetooth device on the Bluetooth
function, and search for devices in the Bluetooth menu.
3. When "Hiting" appears on the Bluetooth devices list, select
"Hiting" to establish pairing and connection ( if asked for a
passkey, enter 0000 ).When the pairing and connection is
successful, it produces a connected tone, and Bluetooth indicator
changes to slow flash, the speaker is ready for playing music.
Short Press “”to play music.
4. When the connection between the mobile and the speaker is
successful, and the speaker is playing music, the music will be
stopped when incoming call is reaching and the speaker will
play incoming call alert, and short press“”to answer the call,
others’speech will be broadcast via the speaker, Long press
“/ ”to adjust desire volume for conversation. Please
keep toward the speaker within 1meter distance during phone
conversation.Short press “”to hang up the phone. The
speaker is automatically restored before playback music.
To reject the incoming call, long press “”for 2 seconds to
reject the incoming call.
To redial the previous call number, short press “”twice for
redial.
5. If the pairing is overtime or no flash for indicator light, please
repeat step 1 to 3 for re-connection.
E.Audioinputmode
1. Please insert 3.5mm audio cable into the audio input port of
the product , with MP3, IPOD, cell phone or other audio
connections, audio music playback, adjust the audio output
volume to achieve the best sound , and the green indicator is
on.
2. Long press“/ ”to adjust desire volume to achieve the
best sound. The speaker is already adjusted to the max. sound
volume when ’du.du.du’ sound is occurred.
3. Through｀audio line-in’ jack playing music, short press“”
for play/pause , the last song, the next song are no function.
Please control music through your music device.
4. Please pull out the audio cable to disconnect the devices from
the speaker, the speaker will switch back to the Bluetooth mood ,
blue status indicator is flashing again, and the product will
automatically pair back with the last device.
F. Power supply
1. Connect DC 5V adapter with the Micro USB for power
supply and charging the built-in rechargeable lithium battery
synchronously, the red power indicator is on. After the full
charge , the red indicator is off , and the green indicator is on.
Disconnect the adapter , all the power charging indicators are
off.
2.Comparing with the Bluetooth function , Line-in is the first for
the unit .
3. The speaker is powered by the built-in rechargeable battery ,
if no adapter to be connected. When the speaker is charging
through Micro USB, it is not affected whether the speaker is
in ON or OFF status.
G.NightLightfunction
1. The Bluetooth speaker is with Night light function. Please
short press “”for Light ON/OFF, or long press “”to
adjust the dimmer function.
H.Troubleshooting
Failure Manifest Solutions
Bluetooth playback
interrupt and produce a
sound,
Fail to turn on
Lower battery, please charge
Music intermittent in
Bluetooth playback
Try to move the bluetooth device close to the product
or change the audio or equipment location
Lower battry , please charge
Try to move the Bluetooth device closer to the
speaker
Turn off & restart
Device of the computer has Bluetooth function or
not
Try repeating this product Bluetooth playback and
set up steps
Play the music in the only one device , cancel
Equipment and unused pairs (see the documents for
help), in accordance with the procedure set pairing
new devices
Equimpment cannot
pair with Bluetooth
audio connection
Bluetooth name is not correct, confirm whether
“Hiting＂.
Repair again
No call function Check the setting of the phone(see the phone
manual)
Lower battery, please charge
Turn off & restart
Key failure
Please use the original adapter for this item.
Weak sound Touch “”key to the suitable level
I.PackingAccessories
1. Micro USB cable x 1 2. Line in audio cable x 1
3. Anadapter(optional) 4. Instruction manualx1
Caution：
1. The product avoids rain and damp, in order to avoid damage.
2. The product should be kept away from fire, high temperature
environment to avoid the product does not work normally and
explosion.
3. When the product is playing music via Bluetooth technology,
the music may caused intermittent or noise because of the
environment or the source device (such as mobile phones)
interference or software incompatibilities etc… Please adjust the
distance between the music device and the unit, or restart the
unit’s power supply or restart the music device or change to
other music source to have better sound performance.
4. When the product is during a call via Bluetooth technology,
the conversation may be intermittent or noise, or phone off
because of the environment or the network signal interference or
poor etc… Please adjust the distance between the phone and the
unit, or change to other calling device, or restart the unit’s power
supply etc..to improve the calling quality.
5. Do not touch the speaker or the speaker collision with other
objects to avoid damaging the speakers.
6. The power supply output 5V and current 1A or more.
7. If it is stopped using for a long time , pls make sure it is full
charged .
8. The product built-in rechargeable lithium battery, please do
not pollute the environment when discarded, try to classify
recycling.
9. The product should be used for the first time after the battery
is fully charged.

FCC Certification Requirements
Caution: Any changes or modifications in construction of this device which are not
expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help.