HIGOAL iR User manual

ALWAYS
SMARTER
Smart Operation System
IR
4
COMMON CONFIGURATIONS
Box include:
• iR Device
• 5VDC power supply
• Extended iR Transmitter
• Extended iR Receiver
• Quick guide
• Compatible Pin
Reset iR Device – Factory mode:
Long press the action button until the led
blink fast in green (8 seconds).
After reset the led will blink slow in red.
LED Indication guide:
Green – Network connected
Red – Network disconnected
Red blink – Factory mode
Green Blink – Scan mode
Fast Green Blink – OTA successful
OTA – Software update:
When a new version is available, you will
notice in the device's page in app the update
icon, press it, confirm the update, at a
successful update the led will blink fast in
green for 2 minutes
HIGOAL Group LTD.
www.higoal-group.com
v012020

32
SCANNING THE IR AND
CONNECTING TO THE APPLICATION
Before scanning make sure that the LED is blink in red,
if not reset the iR, refer to page 4.
CONNECTIONS
Download HIGOAL app from the app store and register.
Scan will be done when smartphone connected to a 2.4GHZ
Wi-Fi.
Enable scan mode, using the included pin long press on the
action button at the back until the LED blink slowly in green
and release, the iR is ready to be scanned.
Tip: short press on the action button at any stage will restore
the panel to the initial state.
Open menu clicking the App logo, and select the first option
"Scan". Follow the instructions. Latest iR added will be marked
with a green frame.
Hot Tip: we recommend that you will name the newly scanned
IR and the IR remotes you want to use.
The iR Able to record remotes and any iR-enabled device, use them through the
app, in scenarios and timers, guides are provided in https://higoal-support.com
POWER LINE
5VDC
ACTION
BUTTON
LAN
INPUT
IR RECEIVE
EXTENDER
IR TRANSMIT
EXTENDER