HIK VISION DS-D5032 Series User manual

32/40-inch LCD Display Unit
User Manual
G6AUM315000009

Thank you for purchasing our product. If there is any question or request, please do not hesitate to
contact us. This manual may contain several technically incorrect places or printing errors, and the
content is subject to change without notice. The updates will be added into the new version of
this manual. We will readily improve or update the products or described in the manual.
Ⅰ

II
Regulatory Information
2002/96/EC (WEEE directive): Products marked with this
symbol cannot be disposed of as unsorted municipal waste in the
European Union. For proper recycling, return this product to
your local supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collection points. For
more information see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery
that cannot be disposed of as unsorted municipal waste in the
European Union. See the product documentation for specific
battery information. The battery is marked with this symbol, which may
include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For
proper recycling, return the battery to your supplier or to a designated
collection point. For more information see: www.recyclethis.info.
EU Conformity Statement
This product and - if applicable - the supplied accessories too
are marked with"CE"and comply therefore with the applicable
harmonized European standards listed under the EMC Directive
2014/30/EU,the LVD Directive 2014/35/EU,the ROHS
Directive 2011/65/EU.

III
Hikvision® 32/40-inch LCD Display Unit User’s Manual
This manual, as well as the software described in it, is furnished under license and may be
used or copied only in accordance with the terms of such license. The content of this
manual is furnished for informational use only, is subject to change without notice, and
should not be construed as a commitment by Hikvision Digital Technology Co., Ltd.
(Hikvision). Hikvision assumes no responsibility or liability for any errors or inaccuracies
that may appear in the book.
Except as permitted by such license, no part of this publication may be reproduced, stored
in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical,
recording, or otherwise, without the prior written permission of Hikvision.
HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, REGARDING THE HIKVISION SOFTWARE. HIKVISION DOES NOT
WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE
RESULTS OF THE USE OF THE HIKVISION SOFTWARE IN TERMS OF ITS CORRECTNESS,
ACCURACY, RELIABILITY, CURRENTNESS, OR OTHERWISE. THE ENTIRE RISK AS TO THE
RESULTS AND PERFORMANCE OF THE HIKVISION SOFTWARE IS ASSUMED BY YOU. THE
EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES. THE ABOVE
EXCLUSION MAY NOT APPLY TO YOU.
IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE
LIABLE TO YOU FOR ANY CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES
(INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS
OF BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO
USE THE HIKVISION SOFTWARE EVEN IF HIKVISION HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE
LIMITATIONS MAY NOT APPLY TO YOU.

TABLE OF CONTENTS
Important safeguards ............................................................................... 2
Introduction ............................................................................................... 4
Features ..................................................................................................... 5
Assembling the monitor ........................................................................... 6
Wall hanging Standard ............................................................................. 7
The function of the interface ................................................................... 7
Front panel controls ................................................................................. 8
Control panel .............................................................................................. 8
Changing a monitor parameter ................................................................. 9
Hot keys .................................................................................................... 9
Adjustment procedure ............................................................................ 9
OSD function ........................................................................................... 10
VGA menu ................................................................................................ 10
Cam menu ................................................................................................ 12
HDMI menu ............................................................................................... 13
Self-diagnosis.......................................................................................... 21
Troubleshooting...................................................................................... 22
Specifications.......................................................................................... 23
1
DVI menu.................................................................................................. 15

IMPORTANT SAFEGUARDS
1. Installation cautions
•Do not block any ventilation openings.
•Always ensure that the monitor is located in a well-ventilated area topreventthe
unit from overheating.
•Only use accessories specified bythe manufacturer orthose sold with the product
•Avoid operating or placing the monitor in the following environments:extremes of
temperatures, both hot and cold; high humidity; direct sunlight;excessivelydusty
surroundings; avoid close proximity to other equipment that generates astrong
magnetic field
2. Water and moisture
Do not use this appliance near water. To reduce the risk of fire or electric shock,do
not expose this unit to rain ormoisture.
3. Power cord and power cord protection
Power cords should be routed so that they not likely to be walked on or pinched. Pay
particular attention to the location of cords and plugs, convenience receptacles, and
the point of exit from theappliance.
4. Product care
Do not touch the screen directly with fingers. The oils from your skinmayleave
marks on the surface of the screen, which are difficult to be removedandmay
damage the screen permanently. Do not apply pressure to thescreen.
5. Cleaning
Clean only with a drycloth.
6. Servicing
Do notattempt to service this unit yourself. Opening orremoving covers mayexpose
you to dangerous voltage or other hazards. Refer all servicing to qualifiedservice
personnel.
7. Lightning
For added protection during a lighting storm or when this unit is left unattended and
unused for long periods of time, unplug the unit from the wall outletanddisconnect
the cable system. This will prevent damage to the unit due to lightningandpower
line surges.
2

IMPORTANT SAFEGUARDS
8. Mains plug (2 pin/3 pin)
•Do not remove the grounding or earth connection from the power supply /mains
plug.
•Always remember to unplug the monitor from the power supply underthe
following circumstances if the monitor will not be used for a long period of time, if
the power supply cable or plug/connector is damaged or if the monitorhousingis
damaged or broken.
CAUTION: Do not attempt to dismantle this product. Any attempt to dismantle
or remove the covers from this product will invalidate the warranty and may also
result in serious injury.
3

INTRODUCTION
This manual explains how to correctly install, operate and get thebestperformance
from your monitor. Please read this user manual carefully before installingyour
monitor then keep it near your monitor for quick reference. First, please checkthat
the contents of the box correspond with the followingchecklist:
•LCD monitor
•Power cord
•VGA cable
•Remote control(optional)
•User manual
If any item is missing or damaged, please contact your dealer. Please keepthebox
and packing materials so that you may properly store or transportyourmonitor.
4
•HDMI cable(optional)
•Audio cable(optional)

FEATURES
•The monitor is designed foruse in a small work area or for those who need more
work space on the desk.
•The convenient and user-friendly onscreen display allows for easy andaccurate
adjustments of screen size, position and screencolor.
•The monitor complies with the VESA Display Data Channel (DDC)specification
for Plug and Play compatibility. Advanced microcircuitry makes setupand
configuration fast and effortless.
•The monitor features Advanced Color Controls for fine-tuning to meet yourown
personal tastes or application requirements. Use the on-screen controls to adjust
the color temperature,
•RGB gain value for the best possible screen color andintensity.
• Press the Menu button and activate the Self-Diagnosis menu todetermine
whether your monitor is functioning normally, not receiving a signal oris
receiving a signal that is out of scanning range.
•Activate the higher refresh rates of the monitor to stabilize the screenand
eliminate the annoying flicker that contributes to eye-strain andheadaches.
•The monitor supports the optimal display performance with 1920x1080 @ 60 Hz
•The monitor can be connected to various types of video devices withsupporting
video input signals such as Composite video (CVBS), and Separatevideo.
•The internal stereo speakers produce a good quality audiosound.
5

ASSEMBLING THE MONITOR
The monitors are designed for use on adesktop.
The arm of the monitor stand is shipped preinstalled on themonitor.
To assemble the monitor:
1. Put a smooth pad or cloth on a level surface. Place the monitor on itfacing
downwards.
2. Insert the arm of the monitor stand of the monitorinto the pedestal foot provided.
See figures below.
To disassemble the monitor:
1. Put a smooth pad or cloth on a level surface. Place the monitor on itfacing
downwards.
2. Shrapnel with fingersorsimilar objects hold the base below, carefullydetach
the supporting arm from the foot by pressing the groove on the back ofthe
supporting arm. (Note that the fixation point can be broken if too much forceis
applied). See figures below.
6