HIK VISION DS-2DB4236I-CWX User manual

0
Explosion-Proof IR Zoom Bullet Camera
Quick Start Guide
Installation Video

Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
i
Quick Start Guide
© 2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights
reserved.
This Manual is the property of Hangzhou Hikvision Digital Technology
Co., Ltd. or its affiliates (hereinafter referred to as “Hikvision”), and it
cannot be reproduced, changed, translated, or distributed, partially
or wholly, by any means, without the prior written permission of
Hikvision. Unless otherwise expressly stated herein, Hikvision does
not make any warranties, guarantees or representations, express or
implied, regarding to the Manual, any information contained herein.
About this Manual
The Manual includes instructions for using and managing the
Product. Pictures, charts, images and all other information
hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to
firmware updates or other reasons. Please find the latest version of
this Manual at the Hikvision website (http://www.hikvision.com).
Please use this Manual with the guidance and assistance of
professionals trained in supporting the Product.
Trademarks Acknowledgement
 and other Hikvision’s trademarks and logos are
the properties of Hikvision in various jurisdictions.
Other trademarks and logos mentioned are the properties of
their respective owners.
LEGAL DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS
MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,

Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
ii
SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL
FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE.
THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO
EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,
AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF
SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON
BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT
LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE
PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR
INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY
RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE
OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER
ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF
REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL
APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR
ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A
MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD
PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY,
INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND

Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
iii
OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR
ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR
PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE
DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL
WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY
NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN
SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATER PREVAILS.
05070120211231

Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
iv
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied
accessories too are marked with "CE" and comply
therefore with the applicable harmonized
European standards listed under the EMC Directive 2014/30/EU, the

Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
v
LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU, the ATEX
Directive 2014/34/EU.
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see:
www.recyclethis.info
2006/66/EC (battery directive): This product
contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union.
See the product documentation for specific battery
information. The battery is marked with this symbol,
which may include lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the battery to your
supplier or to a designated collection point. For more information
see:www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards
requirements.
Intended Use of the Camera
ATEX: II 2 G Ex db op is IIC T6 Gb/ II 2 D EX tb op is IIIC
T80 °C Db
IECEx: Ex db op is IIC T6 Gb/Ex tb op is IIIC T80°C Db
Hazardous Area Classification: Zone 1, Zone 2, Zone 21, Zone 22.

Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
vi
IP Degree: IP68 (1m, 1h)
Ex Standards:
IEC 60079-0: 2011
EN 60079-0: 2012
IEC 60079-1: 2014
EN 60079-1: 2014
IEC 60079-31: 2013
EN 60079-31: 2014
IEC 60079-28: 2015
Special Conditions for Safe Use (Conditions of Certification)
The following conditions relate to safe installation and/or use of the
equipment.
i. The flameproof joints of the Explosion-Proof Bullet Camera are
not intended to be repaired.
ii. Replacement fasteners securing flameproof joints must have a
yield strength ≥ A2-70 or A4-70.
Explosion-Proof IR Zoom Bullet Camera Nameplate
Explosion-Proof Bullet Camera
WARNING:
DO NOT OPEN WHEN EXPLOSIVE
ATMOSPHERE IS PRESENT

Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
vii
Safety Instruction
These instructions are intended to ensure that user can use the
product correctly to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings
are neglected.
Cautions: Injury or equipment damage may occur if any of the
cautions are neglected.
Warnings
Laws and Regulations
The device should be used in compliance with local laws, electrical
safety regulations, and fire prevention regulations.
Electrical Safety
CAUTION: To reduce the risk of fire, replace only with the same type
and rating of fuse.
Warnings Follow these
safeguards to prevent
serious injury or death.
Cautions Follow these precautions
to prevent potential injury or
material damage.

Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
viii
The equipment must be connected to an earthed mains
socket-outlet.
A readily accessible disconnect device with the appropriate rating
shall be incorporated external to the equipment.
An overcurrent protective device with the appropriate rating shall be
incorporated external to the equipment not exceeding the
specification of the building.
An all-pole mains switch shall be incorporated in the electrical
installation of the building.
Grounding: The both internal and external earthing shall be
connected reliably.
Battery
This equipment is not suitable for use in locations where children are
likely to be present.
CAUTION: Risk of explosion if the battery is replaced by an incorrect
type.
Improper replacement of the battery with an incorrect type may
defeat a safeguard (for example, in the case of some lithium battery
types).
Do not dispose of the battery into fire or a hot oven, or mechanically
crush or cut the battery, which may result in an explosion.
Do not leave the battery in an extremely high temperature
surrounding environment, which may result in an explosion or the
leakage of flammable liquid or gas.
Do not subject the battery to extremely low air pressure, which may
result in an explosion or the leakage of flammable liquid or gas.

Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
ix
Dispose of used batteries according to the instructions.
L’utilisation ou le remplacement inadéquats de la pile peuvent
entraîner un risque d’explosion. Remplacez-la par le même type ou
l’équivalent du même type seulement. Jetez les piles usagées
conformément aux directives fournies par le fabricant de la pile.
Maintenance
To avoid fire danger caused by electrostatic charge, never touch or
wipe the device in explosive environment. Perform the wiping and
replacing accessories only under non-explosive environment with
the glove.
To prevent accumulation of electrostatic charge, use a soft and damp
cloth when clean inside and outside surfaces of the bubble. DO NOT
use alkaline detergents.
Installation
Never place the equipment in an unstable location. The equipment
may fall, causing serious personal injury or death.
Cautions
Electrical Safety
Ensure correct wiring of the terminals for connection to an AC mains
supply.
The equipment has been designed, when required, modified for
connection to an IT power distribution system.
Fire Prevention

Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
x
No naked flame sources, such as lighted candles, should be placed
on the equipment.
The serial port of the equipment is used for debugging only.
Installation
Install the equipment according to the instructions in this manual.
To prevent injury, this equipment must be securely attached to the
wall in accordance with the installation instructions.
Be sure that there is enough space to install the device and
accessories.
Make sure that the wall is strong enough to withstand at least 8
times the weight of the device and the mount.
Make sure that the power has been disconnected before you wire,
install, or disassemble the device.
Installation could be only conducted by qualified personnel
according to relevant national regulations.
Transportation
Do not drop the product or subject it to physical shock.
Keep all wrappers after unpack them for future use. In case of any
failure occurred, you need to return the device to the factory with
the original wrapper. Transportation without the original wrapper
may result in damage on the device and lead to additional costs.
Power Supply
The power source should meet limited power source or PS2
requirements according to IEC 60950-1 or IEC 62368-1 standard.
Refer to the device label for the standard power supply. Please make
sure your power supply matches with your device.

Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
xi
Use a power adapter provided by qualified manufacturers. It is
recommended to provide an independent power adapter for each
device as adapter overload may cause over-heating or a fire hazard.
System Security
Please understand that you have the responsibility to configure all
the passwords and other security settings about the device, and
keep your user name and password.
Maintenance
If the product does not work properly, please contact your dealer or
the nearest service center. We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.
A few device components (e.g., electrolytic capacitor) require regular
replacement. The average lifespan varies, so periodic checking is
recommended. Contact your dealer for details.
To ensure explosion-proof performance, do not damage
explosion-proof surface.
Ambient temperature: -40°C to 60°C
DO NOT OPEN WHEN ENERGIZED.
POTENTIAL ELECTROSTATIC CHARGING HAZARD – SEE
INSTRUCTIONS.
When assembly and operation, the operator must follow the
requirements of the IEC 60079-14: latest version Explosive
atmospheres- Part 14: Electrical installations design, selection and
erection, beside of the manufacturer’s operating instructions or its
National equivalent.

Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
xii
Repair and overhaul shall comply with IEC 60079-19: latest version
or its National equivalent.
Cleaning
Please use a soft and dry cloth to clean the inner and outer surfaces.
Do not use alkaline detergents.
Keep the surface clean and prevent dust accumulation. DO NOT
clean the surface by compressed air duster.
Do not touch sensor modules with fingers. If cleaning is necessary,
use clean cloth with a bit of ethanol and wipe it gently. If the camera
will not be used for an extended period, please replace the lens cap
to protect the sensor from dirt.
Using Environment
When any laser equipment is in use, make sure that the device lens
is not exposed to the laser beam, or it may burn out.
DO NOT aim the lens at the sun or extra bright places. A blooming or
smear may occur otherwise (which is not a malfunction however),
and affecting the endurance of sensor at the same time.
To avoid heat accumulation, good ventilation is required for a proper
operating environment.
DO NOT expose the device to extremely hot, cold, dusty, corrosive,
saline-alkali, or damp environments. For temperature and humidity
requirements, see device specification.
DO NOT expose the device to high electromagnetic radiation.
Emergency
If smoke, odor, or noise arises from the device, immediately turn off
the power, unplug the power cable, and contact the service center.

Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
xiii
Time Synchronization
Set up device time manually for the first time access if the local time
is not synchronized with that of the network. Visit the device via web
browser/client software and go to time settings interface.

Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
xiv
Table of Contents
1 Overview......................................................................................... 1
1.1 Introduction .................................................................... 1
1.1.1 Power Supply........................................................ 1
1.1.2 Explosion-proof Parameters ................................. 1
1.1.3 Mechanical Specification ...................................... 1
1.1.4 Working Environment........................................... 1
1.2 Model Description........................................................... 2
1.3 Appearance Description .................................................. 3
1.3.1 Type I Overview .................................................... 3
1.3.2 Type II Overview ................................................... 4
1.3.3 Type III Overview .................................................. 5
1.3.4 Type IV Overview.................................................. 6
1.4 Cable Description ............................................................ 7
2 Installation...................................................................................... 8
2.1 Run the Device in Safe Area .......................................... 10
2.2 Wall Mounting with Bracket Type I................................ 11
2.3 Wall Mounting with Bracket Type II............................... 15
2.4 Protective Measures for Outdoor Installation ............... 18
3 Setting the Network Camera over the LAN .................................. 19
3.1 Wiring ........................................................................... 19
3.2 Activating the Camera................................................... 20
3.2.1 Activation via Web Browser................................ 20
3.2.2 Activation via SADP Software ............................. 22
3.3 Modifying the IP Address .............................................. 23
4 Accessing via Web Browser .......................................................... 26

Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
1
1Overview
1.1 Introduction
Explosion-Proof IR Zoom Bullet Camera is capable of video/audio
collecting, smart encoding and network transmitting. It adopts an
embedded system and a high-performed hardware process platform
to achieve good stability and reliability. You can visit and configure
your camera via web browser and client software.
Explosion-proof network camera adopts a stainless steel enclosure,
receiving an IP68 rating for ingress protection.
1.1.1 Power Supply
For detailed information about the power supply, refer to
Explosion-proof IR Zoom Bullet Camera Nameplate.
1.1.2 Explosion-proof Parameters
For detailed information about explosion-proof parameters, refer to
Explosion-proof IR Zoom Bullet Camera Nameplate.
1.1.3 Mechanical Specification
Material: 304/316L Stainless Steel.
1.1.4 Working Environment
Altitude (Above sea level): Within 2000 m.
Humidity: Within 95%.

Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
2
Temperature: Refer to Explosion-proof IR Zoom Bullet Camera
Nameplate.
Note:
To ensure safety of the users and explosion-proof performance of
the camera, your installation environment must meet the installation
requirements of the camera you purchased.
1.2 Model Description
The product can be named by rules as shown in Figure 1-1.
Supplement Light:
I: Infrared
DS-2 x x x x x x x
Hikvision Front-end Product
Product Type:
D: Network
A: Analog
4: Project Product
Max. Resolution (MP)
Zoom Ration
-x x x
Product Shape:
B: Bullet camera
Power
A: 24 VAC
C: 100 VAC to 240 VAC
D: 12 VDC/30 VDC
Wiper
Explosion-proof Product
Figure 1-1 Model Explanation

Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
3
1.3 Appearance Description
This camera series has four appearance types:
Type I: camera
Type II: camera with wiper
Type III: camera with IR and wiper
Type IV: camera with IR
1.3.1 Type I Overview
4
5
1
2
3
Figure 1-2 Overview of Type I Camera
Table 1-1 Description of Type I Camera
No.
Description
No.
Description
1
Sun shield
4
Ring for safety rope
2
Transparent glass
5
Grounding screw
3
Mounting base

Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
4
Note:
Grounding should be applied properly via the grounding screw to
avoid static electricity accumulation on the device case.
1.3.2 Type II Overview
1
2
3
4
5
6
Figure 1-3 Overview of Type II Camera
Table 1-2 Description of Type II Camera
No.
Description
No.
Description
1
Sun shield
4
Grounding screw
2
Transparent glass
5
Ring for safety rope
3
Wiper
6
Mounting base
Note:
Grounding should be applied properly via the grounding screw to
avoid static electricity accumulation on the device case.

Explosion-proof IR Zoom Bullet Camera·Quick Start Guide
5
1.3.3 Type III Overview
1
2
3
4
6
5
7
Figure 1-4 Overview of Type III Camera
Table 1-3 Description of Type III Camera
No.
Description
No.
Description
1
IR
5
Grounding screw
2
Sun shield
6
Ring for safety rope
3
Transparent glass
7
Mounting base
4
Wiper
Note:
Grounding should be applied properly via the grounding screw to
avoid static electricity accumulation on the device case.