HIK VISION Explosion-Proof User manual

Explosion-Proof Network Bullet Camera
Quick Start Guide

Table of Contents
English........................................................................................................1
Français ....................................................................................................15
Deutsch ....................................................................................................28
Español.....................................................................................................41
Italiano.....................................................................................................54
Português .................................................................................................66
Nederlands ...............................................................................................79
Čeština......................................................................................................91
Dansk .....................................................................................................103
Magyar...................................................................................................115
Polski ......................................................................................................127
Română..................................................................................................140
Slovenčina ..............................................................................................152
Bahasa Indonesia ...................................................................................165
 ......................................................................................................177
Türkçe .....................................................................................................193
Русский ..................................................................................................205
Українська.............................................................................................218

Network Bullet Camera·Quick Start Guide
1
English
© 2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights
reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to change,
without notice, due to firmware updates or other reasons. Please find the latest
version of this Manual at the Hikvision website (https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained
in supporting the Product.
Trademarks
and other Hikvision’s trademarks and logos are the properties
of Hikvision in various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective
owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND
THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE,
ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO
EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES
FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,
CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON
BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR
OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR
INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY
RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER
DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION,

Network Bullet Camera·Quick Start Guide
2
OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS,
AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS
TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS
PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD
PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL
PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU
SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE
DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY
ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE
NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE
LAW, THE LATER PREVAILS.
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
FCC compliance: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation.

Network Bullet Camera·Quick Start Guide
3
EU Conformity Statement
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable
harmonized European standards listed under the EMC Directive
2014/30/EU , the LVD Directive 2014/35/EU , the RoHS Directive
2011/65/EU , the ATEX Directive 2014/34/EU .
2012/19/EU (WEEE directive): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the European
Union. For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see:
www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that
cannot be disposed of as unsorted municipal waste in the European
Union. See the product documentation for specific battery
information. The battery is marked with this symbol, which may
include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).
For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see:
www.recyclethis.info
Intended use of the camera
ATEX: II 2 G D Ex db IIC T6 Gb/Ex tb IIIC T80°C Db IP68
IECEx: Ex db IIC T6 Gb/Ex tb IIIC T80°C Db IP68
Hazardous Area Classification: Zone 1, Zone 2, Zone 21, Zone 22.
IP Degree: IP68 (2m, 2h)
Ex Standards:
IEC 60079-0: 2011
EN 60079-0: 2012
IEC 60079-1: 2014
EN 60079-1: 2014
IEC 60079-31: 2013
EN 60079-31: 2014

Network Bullet Camera·Quick Start Guide
4
Nameplate:
Special Conditions for Safe Use:
1. Warning: Potential Electrostatic Charging Hazard –See Instructions.
2. The flameproof joints are not intended to be repaired.
Cautions:
1. When assembly, operation and maintenance, the operator must follow the
requirements of he IEC 60079-14: latest version Explosive atmosphere- Part 14:
Electrical installation design, selection and erection, beside of the manufacturer’s
operation instruction or its National equivalent.
2. Repair and overhaul shall comply with IEC 60079-19: latest version or its
National equivalent.
3. Use M6X18L14 fasteners with yield strength ≥450 MPa.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
KC
이기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서
가정용 환경에서 사용하는 경우 전파간섭의 우려가 있습니다.
Warning:
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
The waterproof jacket, cable adapter and the waterproof tapes cannot be
exposed to the dangerous area without explosion-proof measures.

Network Bullet Camera·Quick Start Guide
5
Safety Instruction
These instructions are intended to ensure that the user can use the product
correctly to avoid danger or property loss.
Laws and Regulations
The device should be used in compliance with local laws, electrical safety
regulations, and fire prevention regulations.
Electricity
In the use of the product, you must be in strict compliance with the electrical
safety regulations of the nation and region.
The equipment shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on the equipment.
Provide a surge suppressor at the inlet opening of the equipment under
special conditions such as the mountain top, iron tower, and forest.
CAUTION: To reduce the risk of fire, replace only with the same type and
rating of fuse.
The equipment must be connected to an earthed mains socket-outlet.
An appropriate readily accessible disconnect device shall be incorporated
external to the equipment.
An appropriate overcurrent protective device shall be incorporated external to
the equipment, not exceeding the specification of the building.
An all-pole mains switch shall be incorporated in the electrical installation of
the building.
Ensure correct wiring of the terminals for connection to an AC mains supply.
The equipment has been designed, when required, modified for connection to
an IT power distribution system.
Battery
Do not ingest battery. Chemical burn hazard!
This product contains a coin/button cell battery. If the coin/button cell battery is
swallowed, it can cause severe internal burns in just 2 hours and can lead to
death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product
and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of
the body, seek immediate medical attention.
CAUTION: Risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
ATTENTION: IL Y A RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR
UNE BATTERIE DE TYPE INCORRECT. METTRE AU REBUT LES BATTERIES
USAGÉES CONFORMÉMENT AUX INSTRUCTIONS.

Network Bullet Camera·Quick Start Guide
6
Improper replacement of the battery with an incorrect type may defeat a
safeguard (for example, in the case of some lithium battery types).
Do not dispose of the battery into fire or a hot oven, or mechanically crush or
cut the battery, which may result in an explosion.
Do not leave the battery in an extremely high temperature surrounding
environment, which may result in an explosion or the leakage of flammable
liquid or gas.
Do not subject the battery to extremely low air pressure, which may result in
an explosion or the leakage of flammable liquid or gas.
+ identifies the positive terminal(s) of equipment which is used with, or
generates direct current. - identifies the negative terminal(s) of equipment
which is used with, or generates direct current.
Fire Prevention
No naked flame sources, such as lighted candles, should be placed on the
equipment.
The serial port of the equipment is used for debugging only.
Hot Surface Prevention
CAUTION: Hot parts! Burned fingers when handling the parts. Wait
one-half hour after switching off before handling parts. This sticker is
to indicate that the marked item can be hot and should not be touched
without taking care. For device with this sticker, this device is intended
for installation in a restricted access location, access can only be gained
by service persons or by users who have been instructed about the
reasons for the restrictions applied to the location and about any
precautions that shall be taken.
Installation
Install the equipment according to the instructions in this manual.
To prevent injury, this equipment must be securely attached to the floor/wall
in accordance with the installation instructions.
Never place the equipment in an unstable location. The equipment may fall,
causing serious personal injury or death.
Power Supply
The input voltage should conform to IEC60950-1 standard: SELV (Safety Extra
Low Voltage) and the Limited Power Source. Refer to the appropriate
documentation for detailed information.
The power source should meet limited power source or PS2 requirements
according to IEC 60950-1 or IEC 62368-1 standard.
DO NOT connect multiple devices to one power adapter, to avoid over-heating
or fire hazards caused by overload.
Make sure the plug is properly connected to the power socket.

Network Bullet Camera·Quick Start Guide
7
White Light Illuminator (If supported)
Possibly hazardous optical radiation emitted from this product.
DO NOT stare at operating light source. May be harmful to the eyes.
Wear appropriate eye protection or DO NOT turn on the white light when you
assemble, install or maintain the camera.
Transportation
Keep the device in original or similar packaging while transporting it.
System Security
The installer and user are responsible for password and security configuration.
Maintenance
If the product does not work properly, please contact your dealer or the
nearest service center.
We shall not assume any responsibility for problems caused by unauthorized
repair or maintenance.
A few device components (e.g., electrolytic capacitor) require regular
replacement. The average lifespan varies, so periodic checking is
recommended. Contact your dealer for details.
Cleaning
Please use a soft and dry cloth when clean inside and outside surfaces of the
product cover. Do not use alkaline detergents.
Using Environment
When any laser equipment is in use, make sure that the device lens is not
exposed to the laser beam, or it may burn out.
DO NOT expose the device to high electromagnetic radiation or dusty
environments.
For indoor-only device, place it in a dry and well-ventilated environment.
DO NOT aim the lens at the sun or any other bright light.
Make sure the running environment meets the requirement of the device. The
operating temperature shall be -30 °C to 60 °C (-22 °F to 140 °F), and the
operating humidity shall be 95% or less (no condensing).
DO NOT place the camera in extremely hot, cold, dusty or damp locations, and
do not expose it to high electromagnetic radiation.
Emergency
If smoke, odor, or noise arises from the device, immediately turn off the power,
unplug the power cable, and contact the service center.
Time Synchronization
Set up device time manually for the first time access if the local time is not
synchronized with that of the network. Visit the device via Web browse/client
software and go to time settings interface.

Network Bullet Camera·Quick Start Guide
8
Reflection
Make sure that no reflective surface is too close to the device lens. The IR light
from the device may reflect back into the lens causing reflection.
Cautions
Make sure the power supply voltage is correct before using the camera.
Do not drop the camera or subject it to physical shock.
To ensure explosion-proof performance, do not damage explosion-proof
surface.
Do not touch sensor modules with fingers. If cleaning is necessary, use clean
cloth with a bit of ethanol and wipe it gently. If the camera will not be used for
an extended period, please replace the lens cap to protect the sensor from
dirt.
Do not aim the camera at the sun or extra bright places. Blooming or smearing
may occur otherwise (which is not a malfunction), and affect the endurance of
sensor at the same time.
The sensor may be burned out by a laser beam, so when any laser equipment
is in using, make sure that the surface of sensor will not be exposed to the
laser beam.
To avoid heat accumulation, good ventilation is required for operating
environment.
Warning! To prevent accumulation of electrostatic charge, only damp cloth
can be used during the cleaning.
Keep the camera away from liquid while in use.
While in delivery, the camera shall be packed in its original packing, or packing
of the same texture.
Regular part replacement: a few parts (e.g. electrolytic capacitor) of the
equipment shall be replaced regularly according to their average enduring
time. The average time varies because of differences between operating
environment and using history, so regular checking is recommended for all the
users. Please contact with your dealer for more details.
Improper use or replacement of the battery may result in hazard of explosion.
Replace with the same or equivalent type only. Dispose of used batteries
according to the instructions provided by the battery manufacturer.
1 Introduction
1.1 Overview
Explosion-proof network camera is a surveillance product capable of video/audio
collecting, smart encoding and network transmitting. It adopts an embedded
system and a high-performed hardware process platform to achieve good
stability and reliability.

Network Bullet Camera·Quick Start Guide
9
You can visit and configure your camera via web browser and client software.
Explosion-proof network camera adopts a stainless steel enclosure, receiving an
IP68 rating for ingress protection.
Application Scenarios: oil industry, mine fields, chemical industry, port, grain
processing industry, etc.
1.2 Model Description
This manual is applicable to the following models:
Table 1-1 Applicable Model List
Model List
DS-2XE6212F-IS
DS-2XE6222F-IS
DS-2XE6232F-IS
DS-2XE6242F-IS
DS-2XE6252F-IS
DS-2XE6262F-IS
DS-2XE6282F-IS
Explanation of model naming:

Network Bullet Camera·Quick Start Guide
10
Supports on-board storage
DS-2 X E 6 2 1 2 F -I S
Hikvision front-end product
For specialized application
Application type:
E: Stainless Steel Explosion Proof
Professional
Shape:
2: Bullet camera
Max. Resolution (MP):
1: 1.3 MP 5: 5.0 MP
2: 2.0 MP 6: 6.0 MP
3: 3.0 MP 8: 8.0 MP
4: 4.0 MP
Stands for hardware performance,
including platform, sensor, etc.. Larger
number means better performance
Extended function:
I: IR
S: Audio I/O, Alarm I/O, RS-485
Figure 1-2 Model Explanation
2 Appearance Description
2.1 Overview
Figure 1-3 Explosion-Proof Network Bullet Camera Overview (1)

Network Bullet Camera·Quick Start Guide
11
Figure 1-4 Explosion-Proof Network Bullet Camera Overview (2)
2.2 Cable Description
Power Supply
Network
Alarm In/Out
Figure 1-5 Overview of Cables
Table 1-2 Description of Cables
Cables
Description
Power Supply
Voltage: 100 VAC to 240 VAC (RED/BLACK)
YELLOW/GREEN: for grounding
Alarm In/Out
YELLOW/BLUE: ALARM_IN1
WHITE/RED: ALARM_OUT1
YELLOW/ORANGE: ALARM_IN2
WHITE/PURPLE: ALARM_OUT2
YELLOW/BLACK: ALARM_GND
Network
For network communication
PoE (802.3 at, 42.5 to 57 VDC), 0.2 to 0.3 A
Note:
ALARM_IN1 and ALARM_OUT1 (ALARM_IN2 and ALARM_OUT2) should be used
in pairs for alarm input and output.

Network Bullet Camera·Quick Start Guide
12
3 Installation
Before you start:
●Make sure the device in the package is in good condition and all the
assembly parts are included.
●The standard power supply is 100 VAC to 240 VAC, PoE (802.3 at, 42.5 to 57
VDC), 0.2 to 0.3 A, please make sure your power supply matches with your
camera.
●Make sure all the related equipment is power-off during the installation.
●Check the specification of the products for the installation environment.
●Make sure that the wall is strong enough to withstand four times the
weight of the camera and the bracket.
For the camera that supports IR, you are required to pay attention to the
following precautions to prevent IR reflection:
●Make sure that there is no reflective surface too close to the camera lens.
The IR light from the camera may reflect back into the lens causing
reflection.
3.1 Wall Mounting
Before you start:
There is no wall mounting bracket included in the package. You have to prepare a
wall mounting bracket if you choose this mounting type. The shown bracket
below is only for demonstration.
Steps:
1. Fix the wall mounting bracket to the desired place on wall with four expansion
screws.
Expansion Screws
Figure 1-6 Install the Wall Mounting Bracket
2. Unscrew and remove the pedestal from the bracket.

Network Bullet Camera·Quick Start Guide
13
Pedestal
Screws
Screws
Figure 1-7 Remove the Pedestal
3. Align the screw holes on the camera mounting base with those on the
pedestal, and fix the camera to the pedestal with the supplied screws.
Pedestal
Mounting Base
Screws
Safety
Rope
Figure 1-8 Fix the Camera to the Pedestal
4. Loosen the fixing screw, and adjust the panning position. Tighten the fixing
screw after adjustment.
Fixing Screw
Pan: -45°to 45°
Figure 1-9 Adjust Panning Position

Network Bullet Camera·Quick Start Guide
14
5. Use safety rope to hook the camera and the bracket. Adjust the tilting position
when screwing the camera to the wall mounting bracket.
Tilt: -45°to 45°
Figure 1-10 Secure the Camera to Wall Mounting Bracket
6. Secure the screws to finish installation.
4 Activate and Access Network Camera
Scan the QR code to get Activate and Access Network Camera. Note that mobile
data charges may apply if Wi-Fi is unavailable.

Guide de démarrage rapide de la caméra réseau bullet
15
Français
© 2021 Hangzhou Hikvision Digital Technology Co., Ltd. Tous droits
réservés.
À propos de ce manuel
Ce manuel fournit des instructions d’utilisation et de gestion du produit. Les images, les
tableaux, les figures et toutes les autres informations ci-après ne sont donnés qu’à titre
de description et d’explication. Les informations contenues dans ce manuel sont
modifiables sans préavis, en raison d’une mise à jour d’un micrologiciel ou pour d’autres
raisons. Veuillez trouver la dernière version de ce manuel sur le site Internet de
Hikvision (https://www.hikvision.com).
Veuillez utiliser ce mode d’emploi avec les conseils et l’assistance de professionnels
spécialement formés dans la prise en charge de ce produit.
Marques déposées
et les autres logos et marques de commerce de Hikvision sont la
propriété de Hikvision dans divers pays.
Toutes les autres marques et tous les logos mentionnés appartiennent à leurs
propriétaires respectifs.
Clause d’exclusion de responsabilité
DANS LES LIMITES AUTORISÉES PAR LA LOI EN VIGUEUR, LE PRÉSENT MANUEL ET LE
PRODUIT DÉCRIT, AINSI QUE SON MATÉRIEL, SES LOGICIELS ET SES MICROLOGICIELS,
SONT FOURNIS « EN L’ÉTAT » ET « AVEC TOUS LES DÉFAUTS ET ERREURS ». HIKVISION
NE FAIT AUCUNE GARANTIE, EXPLICITE OU IMPLICITE, Y COMPRIS, MAIS SANS S’Y
LIMITER, DE QUALITÉ MARCHANDE, DE QUALITÉ SATISFAISANTE, OU D’ADÉQUATION À
UN USAGE PARTICULIER. VOUS UTILISEZ LE PRODUIT À VOS PROPRES RISQUES. EN
AUCUN CAS HIKVISION NE SERA TENU RESPONSABLE POUR TOUT DOMMAGE SPÉCIAL,
CONSÉCUTIF, ACCESSOIRE OU INDIRECT, Y COMPRIS, ENTRE AUTRES, LES DOMMAGES
RELATIFS À LA PERTE DE PROFITS D’ENTREPRISE, À L’INTERRUPTION D’ACTIVITÉS
COMMERCIALES, OU LA PERTE DES DONNÉES, LA CORRUPTION DES SYSTÈMES, OU LA
PERTE DES DOCUMENTS, S’ILS SONT BASÉS SUR UNE VIOLATION DE CONTRAT, UNE
FAUTE (Y COMPRIS LA NÉGLIGENCE), LA RESPONSABILITÉ EN MATIÈRE DE PRODUITS,
OU AUTRE, EN RAPPORT AVEC L’UTILISATION DU PRODUIT, MÊME SI HIKVISION A ÉTÉ
INFORMÉ DE LA POSSIBILITÉ D’UN TEL DOMMAGE OU D’UNE TELLE PERTE.
VOUS RECONNAISSEZ QUE LA NATURE D’INTERNET EST SOURCE DE RISQUES DE
SÉCURITÉ INHÉRENTS, ET HIKVISION SE DÉGAGE DE TOUTE RESPONSABILITÉ EN CAS DE

Guide de démarrage rapide de la caméra réseau bullet
16
FONCTIONNEMENT ANORMAL, DIVULGATION D’INFORMATIONS CONFIDENTIELLES OU
AUTRES DOMMAGES DÉCOULANT D’UNE CYBERATTAQUE, D’UN PIRATAGE
INFORMATIQUE, D’UNE INFECTION PAR DES VIRUS, OU AUTRES RISQUES DE SÉCURITÉ
LIÉS À INTERNET ; TOUTEFOIS, HIKVISION FOURNIRA UNE ASSISTANCE TECHNIQUE
DANS LES DÉLAIS, LE CAS ÉCHÉANT.
VOUS ACCEPTEZ D’UTILISER CE PRODUIT CONFORMÉMENT À L’ENSEMBLE DES LOIS EN
VIGUEUR. IL EST DE VOTRE RESPONSABILITÉ EXCLUSIVE DE VEILLER À CE QUE VOTRE
UTILISATION SOIT CONFORME À LA LOI APPLICABLE. IL VOUS APPARTIENT SURTOUT
D’UTILISER CE PRODUIT D’UNE MANIÈRE QUI NE PORTE PAS ATTEINTE AUX DROITS DE
TIERS, Y COMPRIS, MAIS SANS S’Y LIMITER, LES DROITS DE PUBLICITÉ, LES DROITS DE
PROPRIÉTÉ INTELLECTUELLE, OU LA PROTECTION DES DONNÉES ET D’AUTRES DROITS À
LA VIE PRIVÉE. VOUS NE DEVEZ PAS UTILISER CE PRODUIT POUR TOUTE UTILISATION
FINALE INTERDITE, NOTAMMENT LA MISE AU POINT OU LA PRODUCTION D’ARMES DE
DESTRUCTION MASSIVE, LA MISE AU POINT OU LA FABRICATION D’ARMES CHIMIQUES
OU BIOLOGIQUES, LES ACTIVITÉS DANS LE CONTEXTE LIÉ AUX EXPLOSIFS NUCLÉAIRES
OU AU CYCLE DU COMBUSTIBLE NUCLÉAIRE DANGEREUX, OU SOUTENANT LES
VIOLATIONS DES DROITS DE L’HOMME.
EN CAS DE CONFLIT ENTRE CE MANUEL ET LES LOIS EN VIGUEUR, CES DERNIÈRES
PRÉVALENT.
Déclaration de conformité UE
Ce produit et, le cas échéant, les accessoires fournis portent la marque
« CE » attestant de leur conformité aux normes européennes harmonisées
en vigueur regroupées sous la directive sur les émissions
électromagnétiques 2014/30/UE , la directive sur les basses
tensions 2014/35/UE , la directive RoHS 2011/65/UE et la directive
ATEX 2014/34/UE .
2012/19/UE (directive DEEE) : Dans l’Union européenne, les produits
portant ce pictogramme ne doivent pas être déposés dans une décharge
municipale où le tri des déchets n’est pas pratiqué. Pour un recyclage
adéquat, remettez ce produit à votre revendeur lors de l’achat d’un nouvel
équipement équivalent, ou déposez-le dans un lieu de collecte prévu à cet
effet. Pour plus de précisions, rendez-vous sur : www.recyclethis.info

Guide de démarrage rapide de la caméra réseau bullet
17
2006/66/CE (directive sur les batteries) : Ce produit renferme une batterie
qui ne doit pas être déposée dans une décharge municipale où le tri des
déchets n’est pas pratiqué, dans l’Union européenne. Pour plus de
précisions sur la batterie, reportez-vous à sa documentation. La batterie
porte le pictogramme ci-contre, qui peut inclure la mention Cd (cadmium),
Pb (plomb) ou Hg (mercure). Pour la recycler correctement, renvoyez la
batterie à votre revendeur ou déposez-la dans un point de collecte prévu à
cet effet. Pour plus de précisions, rendez-vous sur : www.recyclethis.info
Utilisation prévue de la caméra
ATEX : II 2 G D Ex db IIC T6 Gb/Ex tb IIIC T80°C Db IP68
IECEx : Ex db IIC T6 Gb/Ex tb IIIC T80°C Db IP68
Classification de zone dangereuse : Zone 1, Zone 2, Zone 21, Zone 22.
Indice de protection IP : IP68 (2m, 2h)
Normes Ex :
CEI 60079-0: 2011
EN 60079-0: 2012
CEI 60079-1: 2014
EN 60079-1: 2014
CEI 60079-31: 2013
EN 60079-31: 2014
Plaque signalétique :
Conditions spéciales pour une utilisation en toute sécurité :
1. Température ambiante : de -30 à 60 °C.
2. NE PAS OUVRIR SOUS TENSION.
3. RISQUE POTENTIEL DE CHARGE ÉLECTROSTATIQUE - VOIR LES INSTRUCTIONS.

Guide de démarrage rapide de la caméra réseau bullet
18
4. Lors du montage, de l’utilisation et de l’entretien, l’opérateur doit respecter les
exigences de la dernière version de la norme CEI 60079-14 : Atmosphères explosives -
Partie 14 : Conception, sélection et construction des installations électriques, outre
les recommandations d’utilisation du fabricant ou leur équivalent national.
5. La réparation et la révision doivent être conformes à la dernière version de la
norme CEI 60079-19 ou à son équivalent national.
Avertissement :
Il s’agit d’un produit de classe A. Dans un environnement domestique, ce produit
peut provoquer des interférences radio, auquel cas l’utilisateur peut être amené à
prendre des mesures adéquates.
La gaine étanche, l’adaptateur de câble et les rubans adhésifs étanches ne doivent
pas être exposés à une zone dangereuse sans mesures antidéflagrantes.
Consignes de sécurité
Ces consignes visent à s’assurer que l’utilisateur puisse utiliser le produit
correctement afin d’éviter tout danger ou dommage matériel.
Lois et réglementations
L’appareil doit être utilisé conformément à la législation locale ainsi qu’aux
réglementations en matière de sécurité électrique et de prévention des incendies.
Électricité
En utilisant le produit, vous devez respecter la réglementation relative à la sécurité
électrique de votre pays ou région.
L’équipement ne doit pas être exposé aux gouttes ou aux éclaboussures et aucun
objet rempli de liquide, comme un vase, ne doit être placé sur l’équipement.
Prévoyez un suppresseur de surtension à l’orifice d’entrée de l’équipement dans des
conditions d’installation particulières p. ex. au sommet d’une montagne, d’une tour
métallique et en forêt.
ATTENTION : Pour réduire le risque d’incendie, remplacez-le uniquement par un
fusible de même type et de même calibre.
L’équipement doit être connecté à une prise de courant reliée à la terre.
Un dispositif de déconnexion approprié et facilement accessible doit être incorporé
de manière externe à l’équipement.
Un dispositif de protection contre les surintensités approprié doit être intégré en
externe à l’équipement, sans dépasser les spécifications du bâtiment.
Un interrupteur principal omnipolaire doit être intégré à l’installation électrique du
bâtiment.
Assurez-vous d’effectuer un câblage approprié des bornes pour un branchement à
une alimentation secteur.