HIK VISION NETWORK CAMERA User manual

NETWORK CAMERA
User Manual
V2.0.0
Hangzhou Hikvision Digital Technology Co., Ltd.
http://www.hikvision.com
Service Tel：[phone]
2009-8

Thank you for purchasing our product. If there are any questions, or requests, please
do not hesitate to contact the dealer.
This manual applies to DS-2CD802/812/892PF(NF)(-E)(-W), DS-2CD832F(-E),
DS-2CD802/812/892P(N)-IR1(IR3)(IR5), DS-2CD702/712/792PF(NF)(-E), DS-2CD732F(-E),
DS-2CD862MF-E, DS-2CD852MF-E, DS-2CD762MF-FB(H), DS-2CD752MF-FB(H),
DS-2CD752MF(-E), DS-2CD852F series Network Camera
This manual may contain several technical incorrect places or printing errors, and the
content is subject to change without notice. The updates will be added to the new
version of this manual. We will readily improve or update the products or procedures
described in the manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of
the security or signaling aspects of this product. UL has only tested for fire, shock or
casualty hazards as outlined in UL’s Standard(s) for Safety, UL60950-1. UL
Certification does not cover the performance or reliability of the security or signaling
aspects of this product. UL MAKES NO REPRESENTATIONS, WARRANTIES OR
CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF
ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”

User Manual of Network Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
1
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to avoid
danger or property loss.
The precaution measure is divided into ‘Warnings’ and ‘Cautions’:
Warnings: Serious injury or death may be caused if any of these warnings are neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
Warnings
Follow these safeguards to
prevent serious injury or death.
Cautions
Follow these precautions to
prevent potential injury or material
damage.
Warnings
1. In the use of the product, you must strictly comply with the electrical safety regulations of the
nation and region.
2. Source with AC 24V or DC 12V according to the IEC60950－1 standard. Please refer to technical
specifications for more details.
3. Do not connect several devices to one power adapter as an adapter overload may cause
over-heating and can be a fire hazard.
4. Please make sure that the plug is firmly inserted into the power socket.
5. When the product is installed on a wall or ceiling, the device should be firmly fixed.
6. If smoke, odor, or noise rise from the device, turn off the power at once and unplug the power
cable, then contact the service center.
7. If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)

User Manual of Network Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
2
Notice:
1. Make sure the power supply voltage is correct before using the camera.
2. Do not drop the camera or subject it to physical shock.
3. Do not touch CCD (Charge Coupled Device) modules with fingers. If cleaning is necessary, use a
clean cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an
extended period of time, put on the lens cap to protect the CCD from dirt.
4. Do not aim the camera at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfunction however), and affecting the endurance of CCD at the
same time.
5. The CCD may be burned out by a laser beam, so when any laser equipment is being used, make
sure that the surface of the CCD will not be exposed to the laser beam.
6. Do not place the camera in extremely hot or cold temperatures (the operating temperature
should be between -10°C ~+60°C), dusty or damp locations, and do not expose it to high
electromagnetic radiation.
7. To avoid heat accumulation, good ventilation is required for a proper operating environment.
8. Keep the camera away from liquids.
9. While shipping, the camera should be packed in its original packing, or packing of the same
texture.
10. Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment should be
replaced regularly according to their average life time. The average time varies because of
differences between operating environment and usage history, so regular checking is
recommended for all users. Please contact with your dealer for more details.

User Manual of Network Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
3
Index
Chapter 1 Introduction................................................................................................................................................. 1
1.1 Network camera Functions and Features....................................................................................................... 1
1.2 Applications................................................................................................................................................... 2
Chapter 2 Installation................................................................................................................................................... 3
2.1 Panels Description......................................................................................................................................... 3
2.1.1 Side Elevation of the Camera ............................................................................................................. 3
2.1.2 Rear Panel Description ....................................................................................................................... 4
2.2 Product Installation........................................................................................................................................ 8
2.2.1 Box camera Installation...................................................................................................................... 8
2.2.2 Dome camera Installation................................................................................................................... 9
2.2.3 Vandal proof Dome camera Installation............................................................................................ 10
2.2.4 Topological graph of network camera ...............................................................................................11
2.3 Client Software Installation......................................................................................................................... 13
2.4 Special Client Software Installation for Wireless camera............................................................................ 15
Chapter 3 Parameter Configuration........................................................................................................................... 19
3.1 Network Camera access model overview.................................................................................................... 19
3.1.1 Wireless Network (Only “-w” series support) .................................................................................. 19
3.1.2 Wired network .................................................................................................................................. 20
3.2 Visit Network Camera in LAN.................................................................................................................... 20
3.3 Configuration via Web browser................................................................................................................... 21
3.4 Configuration via Client Software............................................................................................................... 24
3.5 Wireless Network Camera Access............................................................................................................... 30
3.6 Visit Network Camera in Internet................................................................................................................ 32
3.6.1 Visit network camera with static IP .................................................................................................. 32
3.6.2 Visit network camera with dynamic IP............................................................................................. 33
3.7 Parameters Configuration through DS-9000 DVR...................................................................................... 37
Chapter 4 Menu Introduction..................................................................................................................................... 38
4.1 Main Menu .................................................................................................................................................. 38
4.2 Menu Introduction of 2.0 Megapixels CMOS Network Camera................................................................. 39
4.2.1 Language settings ............................................................................................................................. 39
4.2.2 Flicker Control.................................................................................................................................. 39
4.2.3 Resolution settings............................................................................................................................ 39
4.2.4 Frame settings................................................................................................................................... 40
4.2.5 Shutter settings.................................................................................................................................. 40
4.2.6Auto Gain settings............................................................................................................................. 41
4.2.7 DAY / NIGHT Settings..................................................................................................................... 41
4.2.8 White Balance Settings..................................................................................................................... 42
4.2.9 Effect Mode settings......................................................................................................................... 42
4.2.10 Mirror mode settings....................................................................................................................... 43
4.2.11 ePTZ settings .................................................................................................................................. 44
4.3 Menu Introduction of 1.3Megapiixels CCD Network Camera.................................................................... 44
4.3.1 Language settings ............................................................................................................................. 45

User Manual of Network Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
4
4.3.2 Resolution settings............................................................................................................................ 45
4.3.3 Frame settings................................................................................................................................... 45
4.3.4 Lens settings ..................................................................................................................................... 45
4.3.5 Shutter............................................................................................................................................... 46
4.3.6Auto Gain settings............................................................................................................................. 46
4.3.7 DAY / NIGHT Settings..................................................................................................................... 46
4.3.8 White Balance Settings..................................................................................................................... 47
4.3.9 BACKLIGHT COMPENSATION.................................................................................................... 48
4.3.10 Mirror mode settings....................................................................................................................... 50
Appendix 1 SADP Introduction................................................................................................................................. 51
Appendix 2 Port Map ................................................................................................................................................ 53
Appendix 3 Pin Definition......................................................................................................................................... 55
Appendix 4 Product Specification............................................................................................................................. 56

User Manual of Network Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
1
Chapter 1 Introduction
Network camera is a kind of embedded digital surveillance product that combines the features
of both traditional analog camera and net DVS (Digital Video Server). Due to the embedded Linux
operation system and the latest Davinci hardware platform of TI, the system operates with high
scheduling efficiency. Furthermore, the firmware is burned in the flash, which makes the product
small, reliable and highly stable.
1.1 Network camera Functions and Features
Functions:
Network Function :support the TCP/IP protocols(TCP/IP,HTTP,DHCP,DNS,RTSP RTCP,PPPoE,
Furthermore,FTP,SMTP,NTP,SNMP addible),and IE browsing.
Heartbeat Function: The server can acquire real time operating performance of the network
camera through the heartbeat function.
Alarm Function: The product includes 1 channel of alarm signal input and 1 channel of alarm
on/off output, and supports motion detection, video missing, mask alarm and external alarm
input.(Get details in Specification)
Voice Talking：Support bidirectional voice talking and monomial voice broadcasting.
User Management: Support multilevel right management. The administrator can create up to
15 separate users with different right levels, which highly improves the system security.
The product offers a 10M/100M self-adaptive Ethernet interface.
Support set the parameters, browses real time videos or checks the camera performance
through software or IE, and gets external alarming and stores the compressed bit rate through
network.
Support remote upgrades and maintenance.
RS-485 supports monomial transparent channel function so that clients on remote PC can
control the serial devices.
Compression Functions:
Support 1 channel video signal and 25fps in Pal (704 × 576) ,30fps in NTSC (704 × 480) real time
H.264 video Encoding standard compression, which supports both variable bit rate and variable
frame rate; besides, you can self-define both the video quality and its compressed bit rate.
Support resolution of 4CIF (PAL:704 × 576, NTSC:704 × 480), DCIF (PAL:528 × 384, NTSC:528 ×
320), 2CIF (PAL:704 × 288, NTSC:704 × 240), CIF (PAL:352 × 288, NTSC:352 × 240),QCIF (PAL:176
× 144, NTSC:176 × 120).
Support resolution up to 1600×1200 Pixels for 2.0 megapixels Network Camera.
Support resolution up to 1280×960 Pixels for 1.3 megapixels Network Camera.
Remote Control:

User Manual of Network Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
2
The product offers a 10M/100M self-adaptive Ethernet interface.
Support TCP / IP, HTTP, DNS, RTP / RTCP, PPPoE protocols.
Set the parameters, browse real time videos or check the camera performance through
software or IE, and get external alarming and store the compressed bit rate through network.
Support remote upgrades and maintenance.
RS-485 supports monomial transparent channel function so that clients on remote PC can
control the serial devices.
Support NAS storage.
1.2 Applications
This camera is ideal for remote control network applications. E.g.:
1. Network surveillance for ATM, bank counters, supermarkets and factories.
2. Remote surveillance for nursing homes, kindergartens and schools.
3. AI janitors.
4. AI building/district management systems.
5. Self-service systems of power plants.
6. Outdoor monitoring systems for bridges, tunnels and crossroad traffic.
7. Pipelining and warehouse monitoring.
8. 24-hour monitoring for road traffic.
9. Remote monitoring of forest and water resources.
10. Surveillance for airdrome, railway station, bus stop etc.

User Manual of Network Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
3
Chapter 2 Installation
Notes：
1. Please check if all the items on the package list have been included with your camera.
2. Read the following contents carefully before the installation.
3. Make sure that all the related equipment is power-off during the installation.
4. Check the power supply to prevent any damage caused by mismatching problems.
5. If the product does not operate properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the camera yourself. Users are responsible for any
problem caused by modification or repairing without authorization.
2.1 Panels Description
2.1.1 Side Elevation of the Camera
Fig 2.1.1 Side Elevation of DS-2CD832, DS-2CD852 series camera
Fig 2.1.2 Side Elevation of DS-2CD802, DS-2CD812, DS-2CD892, DS-2CD862 series camera

User Manual of Network Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
4
Fig 2.1.3 Side Elevation of DS-2CD702,DS-2CD712,DS-2CD732,DS-2CD792, DS-2CD752, DS-2CD762 series camera
Notes: The vandal proof series dome is slightly different, please refer to 2.2.3 Vandal proof dome hard
installation part.
2.1.2 Rear Panel Description
Fig. 2.1.4 Rear Panel of DS-2CD832, DS-2CD852F series
1. Standard Ethernet (UTP) RJ45 (10M/100M self-adaptive).
2. 1 channel voice talk input,3.5mm audio interface, 2.0～2.4Vp-p, 1kΩ.
3. 1 channel voice talk output, 3.5mm audio interface, electric line level, 600Ω.

User Manual of Network Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
5
4. 1 channel alarm output (1A 1B). 1 channel alarm input signal (IN,G). RS-485 bus interface
(T＋T-) (Only DS-2CD832F Support RS-485).
5. SD card slot (Support SDHC ).
6. Power supply interface of 12VDC, ±10%.
Fig. 2.1.5 Rear Panel of DS-2CD802, DS-2CD812 , DS-2CD892 series
1. Standard Ethernet (UTP) RJ45 (10M/100M self-adaptive).
2. 1 channel voice talk input,3.5mm audio interface, 2.0～2.4Vp-p, 1kΩ.
3. 1 channel voice talk output, 3.5mm audio interface, electric line level, 600Ω.
4. BLC, AI, AES dial switch.
5. GND.
6. VD( Video Drive), DD(Direct current Drive).
7. Video Output port.
8. SD card slot.
9. alarm output (1A 1B); RS-485 bus interface（T＋T-）; Alarm input signal (IN,G).
10. Power supply interface of 12VDC, ±10%.

User Manual of Network Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
6
Fig. 2.1.6 Rear Panel of DS-2CD852, DS-2CD862 , series
1. Standard Ethernet (UTP) RJ45 (10M/100M self-adaptive).
2. 1 channel voice talk input,3.5mm audio interface, 2.0～2.4Vp-p, 1kΩ.
3. 1 channel voice talk output, 3.5mm audio interface, electric line level, 600Ω.
4. SDHC card slot (Support SDHC ).
5. 1 channel alarm input signal.
6. 1 channel alarm output (1A 1B). Please refer to Section 2.3.2 for pin definition. (The external
series-wound power should be under 12V DC/ 30mA).
7. RS-485 bus interface (T+ T-).
8. Standard BNC for 1 channel video output.
9. GND.
10. Power supply indicate lamp.
11. Power supply interface of AC24V or DC12V.

User Manual of Network Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
7
Fig. 2.1.7 Rear Panel of DS-2CD702, DS-2CD712, DS-2CD732, DS-2CD792, DS-2CD752MF-E series
Address& protocols dial switch, define for dial switch: , from 1 to 5 dial switch
function as follows:
Switch Function ON OFF
1 SHARP SOFT
2 AES AI
3 BLC OFF
4 FL ON
5 NAGC SAGC
Notices: There are invalid dial switches for DS-2CD702, DS-2CD712, DS-2CD792, DS-2CD732 series
from 6 to 10;

User Manual of Network Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
8
Fig 2.1.8 Rear Panel of DS-2CD802/812/892P-I R 1/3/5 , DS-2CD752MF-FB, DS-2CD762MF-FB series camera
1. A means UTP interface;
2. B means voice input interface;
3. C means voice output interface;
4. D means, T+,T- means RS-485 interface; G, IN means alarm input interface; 1A,1B means alarm
output interface;
5. E means BNC video output interface;
6. F means power supply input interface;
Notes: The rear panel of vandal proof dome is slightly different, please make the object as the
standard
2.2 Product Installation
2.2.1 Box camera Installation
Box camera can be fixed in both metope and ceiling. Customers can choose whichever way
according to their specific needs. Please follow the steps below:(Take fixing in ceiling as an example,
fixing in metope follows the same rule).Choose the fixing method and fix the camera bracket
accordingly. If it is metope, then you need to fix the expand bolt (note: the mounting hole of the
expand bolt should align with the bracket) before fixing the bracket. If the wall surface is wooden,
the first step can be ignored and you can use the self-tapping screw to directly fix the bracket.
Please note that the metope on which the camera is fixed should be able to bear at least three
times the weight of the bracket and the camera.
Fig 2.2.1 Fix Ceiling Bracket Fig 2.2.2 Fix Camera

User Manual of Network Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
9
Fig 2.2.3 Fix Lens
2.2.2 Dome camera Installation
Dome camera can be installed include hold equipment, ceiling mounted, cylinders and other styles.
Client can be installed in accordance with their own ways to achieve the installation.Please
according the following specific steps to install (take ceiling mounted as example), when the wall is
wood, use the self-tapping screws to fix the ceiling plate to the wall surface.
Fig 2.2.4 Fix card Fig 2.2.5 Fix in Ceiling
Take the three columns of Dome camera insert in the three fix slot of the ceiling plate. Pay attention
to the direction of insertion. Let the ceiling plate “I” logo and the Dome camera “I” logo in the same
direction. Meanwhile, make the Dome camera along the counterclockwise Rotate 15 degrees until
the switch to the fixed date. At the same time, the “I” signs on the Dome camera and the locking
screw on the ceiling plate is alignment. Then screw down the locking screw on the Ceiling plate.

User Manual of Network Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
10
Fig 2.2.6 Dome camera fixing Fig 2.2.7 Dome camera fixed
2.2.3 Vandal proof Dome camera Installation
The ceiling mount is a suitable installation method for this camera. Please stick to the following steps:
1. First, loosen the screw with a hexagonal Screw driver (attached with the camera), and take down the
transparent cover shown as below:
Fig. 2.2.8 Unload the Cover
2. Use the screws to fix the dome camera on the ceiling.

User Manual of Network Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
11
Fig. 2.2.9 Install the Camera
3. Adjust the camera’s view angle while watching the video on the adjustment monitor.
Loosen the fixed screws, and adjust horizontally and vertically the camera pan and tilt. Adjust the lens focus to
get optimal video effect.
4. Tighten the screw after adjusting camera’s view angle, and cover the transparent casing.
Fig. 2.2.10 Install the Cover
2.2.4 Topological graph of network camera
Take DS-2CD802/812/892PF-E series for example:

User Manual of Network Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
12
Fig 2.2.11 Topological Graph of Network Camera
Physical Interface Connection
UTP Network Interface Connect to network devices, such as switch , HUB, etc. Please
refer to Appendix B for pin Definition.
Audio Input
（
AIN
）
Connect to audio input devices such as active tone (2.0～
2.4Vp-p, 1kΩ)
Audio Output
（
AOUT
）
Connect to sounders like loudhailer 600Ω.
Power Supply
（
DC12V
）
Please refer to the appendix for specified types. Please use a
matched regulator.
Alarm Output
（
1A 1B
）
1 channel alarm out. Please refer to Section
2.3.2 for
connecting instructions. (external series-wound power shall be
under 12V DC / 30mA)
Alarm Input
（
IN G
）
1 channel alarm in.
RS-485 Interface
（
T+ T-
）
Connect to RS-485 devices like PTZ.
SD card slot Insert an SD card for local storage.
Video Output
（
VOUT
）
Standard BNC, connect to monitor.
Notice:

User Manual of Network Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
13
Fig 2.1.12 Alarm output
The alarm output is an on/off output that requires external power supply on connection. The
external power supply shall be 12V DC/30mA, or use AC with external relays. Equipment damage or
electric shock may cause if without relays.
2.3 Client Software Installation
Note:
It is recommended that user’s computer adopted INTEL P3, P4, C4, Core4 CPU, and well-known
brands (Asus, Gigabyte, MSI, ECS, and INTEL etc.)Intel chipset motherboard, to ensure the stability
of the system. Tested the following models of the current graphics cards support the software
installed,ATIRadeonX1650,X1600,X1550,X1300,X800,X600,X550,HD2400,HD2600,NVIDIA GeForce
8600GT,8500GT,8400GS,7600,7300LE,6600LE,6200LE,INTEL915/945G, pay attention to graphics
driver must support hardware scaling function.
Step1: Double click ‘Client software 4000 (v2.0)’ in the Windows Operating System. The ‘Preparing
Setup’ dialog box will pop up as Fig.2.3.1automatically;
Fig.2.3.1 Client Software Installation
Step2: Input “User Name”, “Company Name”;

User Manual of Network Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
14
Fig.2.3.2 Customer Information
Step3: Select the destination folder and click ‘Next’ to go to the next step.
Fig2.3.3 Ready to Install the Program
Step4: Click ‘Install’ to start installation till finish the installation;