HIK VISION DS2CC52C7TVPIR User manual

720P IR Dome Camera·User Manual
0
0
720P IR Dome Camera
User Manual
UD.6L0201D1942A01

720P IR Dome Camera·User Manual
1
1
User Manual
COPYRIGHT © 2015 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures,
graphs are the properties of Hangzhou Hikvision Digital Technology
Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”).
This user manual (hereinafter referred to be “the Manual”) cannot be
reproduced, changed, translated, or distributed, partially or wholly,
by any means, without the prior written permission of Hikvision.
Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the
Manual.
About this Manual
This Manual is applicable to DS-2CC52C7T-VPIR camera.
The Manual includes instructions for using and managing the product.
Pictures, charts, images and all other information hereinafter are for
description and explanation only. The information contained in the
Manual is subject to change, without notice, due to firmware updates
or other reasons. Please find the
latest version in the company website
(http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the
properties of Hikvision in various jurisdictions. Other trademarks and
logos mentioned below are the properties of their respective owners.
0200011050403

720P IR Dome Camera·User Manual
2
2
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND
FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,
AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY
QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION,
ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU
FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR
DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT,
EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL
RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS
PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE
APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT
THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATER PREVAILS.

720P IR Dome Camera·User Manual
3
3
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to
comply with the limits for a digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own
expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation
EU Conformity Statement
This product and - if applicable - the supplied
accessories too are marked with "CE" and comply
therefore with the applicable harmonized European
standards listed under the Low Voltage Directive 2006/95/EC, the EMC
Directive 2004/108/EC.

720P IR Dome Camera·User Manual
4
4
2002/96/EC (WEEE directive): Products marked with
this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information
see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains
a battery that cannot be disposed of as unsorted
municipal waste in the European Union. See the
product documentation for specific battery
information. The battery is marked with this symbol,
which may include lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the battery to your
supplier or to a designated collection point. For more information see:
www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards
requirements.

720P IR Dome Camera·User Manual
5
5
Safety Instruction
These instructions are intended to ensure that user can use the
product correctly to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings
are neglected.
Cautions: Injury or equipment damage may occur if any of the
cautions are neglected.
Warnings
Please adopt the power adapter which can meet the safety extra
low voltage (SELV) request. And source with DC 12V or AC 24V
(depending on models) according to the IEC60950-1 and Limited
Power Source standard.
If the product does not work properly, please contact your dealer
or the nearest service center. Never attempt to disassemble the
Warnings Follow these
safeguards to prevent
serious injury or death.
Cautions Follow these
precautions to prevent
potential injury or material
damage.

720P IR Dome Camera·User Manual
6
6
camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
To reduce the risk of fire or electrical shock, do not expose this
product to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
Please install blackouts equipment into the power supply circuit
for convenient supply interruption.
Please make sure that the ceiling can support more than 50(N)
Newton gravities if the camera is fixed to the ceiling.
Cautions
Make sure the power supply voltage is correct before using the
camera.
Do not drop the camera or subject it to physical shock.
Do not touch sensor modules with fingers. If cleaning is necessary,
use a clean cloth with a bit of ethanol and wipe it gently. If the
camera will not be used for an extended period of time, put on
the lens cap to protect the sensor from dirt.
Do not aim the camera at the sun or extra bright places. A
blooming or smear may occur otherwise (which is not a
malfunction however), and affecting the endurance of sensor at
the same time.

720P IR Dome Camera·User Manual
7
7
The sensor may be burned out by a laser beam, so when any
laser equipment is being used, make sure that the surface of the
sensor will not be exposed to the laser beam.
Do not place the camera in extremely hot or cold temperatures
(the operating temperature should be between -10°C ~ 60°C,
dusty or damp locations, and do not expose it to high
electromagnetic radiation.
To avoid heat accumulation, good ventilation is required for a
proper operating environment.
Do not let water and any liquid flow into the camera.
While shipping, the camera should be packed in its original
packing, or packing of the same texture.
Improper use or replacement of the battery may result in hazard
of explosion. Replace with the same or equivalent type only.
Dispose of used batteries according to the instructions provided
by the battery manufacturer.

720P IR Dome Camera·User Manual
8
8
Table of Contents
1 Introduction.................................................................................. 10
1.1 Features ......................................................................... 10
1.2 Overview ........................................................................ 11
2 Installation.................................................................................... 13
2.1 Ceiling Mounting ............................................................ 14
2.2 Cover Mounting ............................................................. 18
3 Menu Description ......................................................................... 23
3.1 AE................................................................................... 24
3.1.1 BRIGHTNESS ......................................................... 24
3.1.2 AE MODE .............................................................. 24
3.1.3 AGC ...................................................................... 24
3.1.4 SENS UP ................................................................ 25
3.2 White Balance (WB) ....................................................... 25
3.3 Day & Night .................................................................... 26
3.4 Video Setting.................................................................. 27
3.4.5 CONTRAST ............................................................ 27
3.4.6 Sharpness ............................................................. 27
3.4.7 Color Gain............................................................. 27
3.4.8 3D NR ................................................................... 27
3.4.9 Mirror ................................................................... 28
3.5 Function ......................................................................... 28
3.5.1 DETECTION ........................................................... 29
3.5.2 MASKING .............................................................. 30
3.5.3 ZOOM IN............................................................... 32
3.6 RESET ............................................................................. 32

720P IR Dome Camera·User Manual
9
9
3.7 SAVE &EXIT..................................................................... 32
Appendix ......................................................................................... 33
1 Glossary ............................................................................ 33
2 Troubleshooting ................................................................ 37
3 Technical Maintenance...................................................... 40

720P IR Dome Camera·User Manual
10
10
1Introduction
1.1 Features
This camera adopts high performance sensor and advanced print
circuit board design technology. It features high resolution, low
distortion, and low noise, etc. It is suitable for surveillance system
and image process system.
The main features are as follows:
High performance CMOS sensor and high resolution bring
high-quality image;
Support auto day/night switch;
Support 3D NR to get clear and fine image;
Support coaxial HD output function;
Digital zoom function;
Audio available;
Smart IR mode. IR cut filter with auto switch;
Support coaxial control;
Support auto white balance with high color rendition;
Support auto electronic shutter control to adapt to different
environments.

720P IR Dome Camera·User Manual
11
11
1.2 Overview
The appearance of the cameras is as follows:
1
2
3
4
5
6
8
7
10
9
Figure 1-1 Overview
Table 1-1 Overview
No.
Description
No.
Description
1
Trim Ring
6
Cover
2
Power Cable
7
Base Plate
3
CVBS Cable
8
Inclined Component
4
Video Cable
9
Switch Cable

720P IR Dome Camera·User Manual
12
12
No.
Description
No.
Description
5
Audio Cable
10
Corner Mounting Bracket
(Optional, with 2.8mm
Lens)

720P IR Dome Camera·User Manual
13
13
2Installation
Before you start:
Please make sure that the device in the package is in good condition
and all the assembly parts are included.
Make sure that all the related equipment is power-off during the
installation.
Check the specification of the products for the installation
environment.
Check whether the power supply is matched with your AC outlet
to avoid damage.
If the product does not function properly, please contact your
dealer or the nearest service center. Do not disassemble the
camera for repair or maintenance by yourself.
Please make sure the wall is strong enough to withstand three
times the weight of the camera.
For the cement ceiling, you need to mount the camera with
expansion screws. For the woodiness ceiling, you can mount the
camera with self-tapping screws.
The wall should be thick enough to support at least 4 times the
weight of camera and its components.
The ceiling mounting is applied to camera with 2.1mm lens; The
corner mounting is applied to camera with 2.8mm lens.

720P IR Dome Camera·User Manual
14
14
2.1 Ceiling Mounting
Steps:
1. Attach the drill template (supplied) to the place where you want
to fix the camera.
2. Drill the cable hole and screw holes on the ceiling according to
the drill template as shown in Figure 2-1.
PA4
PA4
Figure 2-1 Drill Template
3. Insert 1/3 of the two PA4 screws into the holes on the top of the
template, as shown in Figure 2-1.
4. Hook the inclined component onto the wall aligning the two
holes on the component and two PA4 screws and fix the two
screws.

720P IR Dome Camera·User Manual
15
15
5. Secure the inclined component with inserting a PA4 screw, as
shown in Figure 2-2.
Inclined
Component
PA4
Figure 2-2 Install the Inclined Component
6. Insert 1/3 of the 3 PM4 screw into the metal plate of the inclined
component, as shown in Figure 2-3.
PM4
PM4
PM4
Figure 2-3 Inserting PM4 Screw

720P IR Dome Camera·User Manual
16
16
7. Take apart the trim ring from the base plate by loosening the 3
PM3 screws on the camera with allen wrench, as shown in Figure
2-4.
Trim Ring
Base Plate
PM3
PM3
PM3
Figure 2-4 Disassemble the Trim Ring
8. Attach the base plate of the camera hooking on the 3 PM4 screws
of the inclined component. The base plate can be adjusted +/-5°
according to the direction of arrow. Secure the screws after
adjusting it to its appropriate position, as shown in Figure 2-5.

720P IR Dome Camera·User Manual
17
17
PM4
PM4
PM4
Figure 2-5 Assemble the Base Plate
9. Loosen the PM3 screws of the inclined component with allen
wrench, and the base plate can be adjusted +/-3.5°according to
the direction of arrow.
PM3
Figure 2-6 Adjust the Position

720P IR Dome Camera·User Manual
18
18
10. Fix the trim ring to the base plate by securing the 3 PM3 screws
with allen wrench, as shown in Figure 2-7.
Figure 2-7 Fix the Trim Ring
2.2 Cover Mounting
1. Take apart the plastic enclosure by loosening the screws on the
bracket with allen wrench.
Screw
Figure 2-8 Disassemble the Bracket

720P IR Dome Camera·User Manual
19
19
2. Place the bracket close to the corner and mark 2 screw hole sites
(P1, P2) on the left wall of the corner through the screw holes, as
shown in Figure 2-9.
3. Remove the bracket from the corner and insert 1/3 of the 2 PA4
screws into the 2 screw hole sites (P1, P2) on the left wall of the
corner according to the marks.
Push the
Bracket into
the Corner
For Hooking
the Screws
(P3, P4)
For Marking
the Screw
Sites (P1, P2)
Figure 2-9 Mark the Screw Hole Sites
4. Hook the corner mounting bracket with the screws through the
screw holes (P3, P4). Push the bracket according to the direction
of the arrow, make sure that the 2 PA4 screws hook in the screw
hole sites (P1, P2) from P3, P4.
5. Insert 3 PA4 screws into the screw holes on the right.