HIK VISION DS-2CD852MF-E Series User manual

Network Camera
Installation Manual
V3.0.0
Hangzhou Hikvision Digital Technology Co., Ltd.
http://www.hikvision.com

Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
1
Thank you for purchasing our product. If there are any questions, or requests, please do not
hesitate to contact the dealer. This manual applies to
Box camera Ⅰ: DS-2CD852MF-E, DS-2CD862MF-E
Box camera Ⅱ: DS-2CD886BF-E, DS-2CD886MF-E, DS-2CD877BF, DS-2CD876BF, DS-2CD876MF
Box camera Ⅲ: DS-2CD883F-E(W), DS-2CD854F-E(W), DS-2CD853F-E(W), DS-2CD864FWD-E(W),
DS-2CD863PF(NF)-E(W), DS-2CD893PF(NF)-E (W), DS-2CD893PFWD(NFWD)-E(W),
DS-2CD833F-E(W)
Dome camera Ⅰ: DS-2CD752MF-E
Dome camera Ⅱ:DS-2CD752MF-FB(H),DS-2CD752MF-IFB(H), DS-2CD762MF-FB(H),
DS-2CD762MF-IFB(H)
Dome camera Ⅲ: DS-2CD783F-E(I), DS-2CD754F-E(I), DS-2CD764FWD-E(I), DS-2CD754FWD-E(I),
DS-2CD753F-E(I), DS-2CD763PF(NF)-E(I), DS-2CD793PF(NF)-E(I), DS-2CD793PFWD(NFWD)-E(I),
DS-2CD733F-E(I)
Bullet Camera: DS-2CD8264F-E(I), DS-2CD8264F-ES(I),DS-2CD8254F-E(I), DS-2CD8254F-ES(I),
DS-2CD8253F-E(I), DS-2CD8253F-ES(I)，DS-2CD8233F-E(I), DS-2CD8233F-ES(I)
Cube Camera: DS-2CD8153F-E(W)(I), DS-2CD8133F-E(W)(I)
Mini Dome Camera: DS-2CD7164-E,DS-2CD7153-E, DS-2CD7133-E
This manual may contain several technical incorrect places or printing errors, and the content is
subject to change without notice. The updates will be added to the new version of this manual. We
will readily improve or update the products or procedures described in the manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of the security
or signaling aspects of this product. UL has only tested for fire, shock or casualty hazards as
outlined in UL’s Standard(s) for Safety, UL60950-1. UL Certification does not cover the
performance or reliability of the security or signaling aspects of this product. UL MAKES NO
REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS
PRODUCT.”

Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
2
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to avoid
danger or property loss.
The precaution measure is divided into ‘Warnings’ and ‘Cautions’:
Warnings: Serious injury or death may be caused if any of these warnings are neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
Warnings Follow these safeguards to
prevent serious injury or death.
Cautions Follow these precautions to
prevent potential injury or material
damage.
Warnings:
1. In the use of the product, you must strictly comply with the electrical safety regulations of the
nation and region.
2. Source with DC 12V or AC24V according to the IEC60950-1 standard. Please refer to technical
specifications for more details.
3. Do not connect several devices to one power adapter as an adapter overload may cause
over-heating and can be a fire hazard.If use the POE as the power supply, please make sure that
the POE Switch have the sufficient power.
4. Please make sure that the plug is firmly inserted into the power socket.
5. When the product is installed on a wall or ceiling, the device should be firmly fixed.
6. If smoke, odor, or noise rise from the device, turn off the power at once and unplug the power
cable, then contact the service center.
7. If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)

Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
3
Notice:
1. Make sure the power supply voltage is correct before using the camera.
2. Do not drop the camera or subject it to physical shock.
3. Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit
of ethanol and wipe it gently. If the camera will not be used for an extended period of time, put
on the lens cap to protect the sensor from dirt.
4. Do not aim the camera at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfunction however), and affecting the endurance of sensor at the
same time.
5. The sensor may be burned out by a laser beam, so when any laser equipment is being used,
make sure that the surface of the sensor will not be exposed to the laser beam.
6. Do not place the camera in extremely hot or cold temperatures (the operating temperature
should be between -10°C ~+60°C , dusty or damp locations, and do not expose it to high
electromagnetic radiation.
7. To avoid heat accumulation, good ventilation is required for a proper operating environment.
8. While shipping, the camera should be packed in its original packing, or packing of the same
texture.
9. Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment should be
replaced regularly according to their average life time. The average time varies because of
differences between operating environment and usage history, so regular checking is
recommended for all users. Please contact with your dealer for more details.

Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
4
Table of Contents
Chapter 1 Introduction ................................................................................................................................................1
1.1 Network camera Functions and Features .............................................................................................1
1.2 Applications .....................................................................................................................................................1
Chapter 2 Physical Description................................................................................................................................3
2.1 Box Camera Physical Description............................................................................................................3
2.1.1 Box Camera Ⅰ...................................................................................................................................3
2.1.2 Box Camera Ⅱ...................................................................................................................................5
2.1.3 Box Camera Ⅲ...................................................................................................................................7
2.2 Dome Camera Physical Description........................................................................................................9
2.2.1 Dome Camera Ⅰ...............................................................................................................................9
2.2.2 Dome Camera Ⅱ............................................................................................................................10
2.2.3 Dome Camera Ⅲ............................................................................................................................11
2.3 Bullet Camera Physical Description.....................................................................................................12
2.4 Cube Camera Physical Description ......................................................................................................13
2.5 Mini Dome Camera Physical Description ..........................................................................................15
Chapter 3 Installation................................................................................................................................................16
3.1 Box Camera Installation............................................................................................................................16
3.2 Dome Camera Installation........................................................................................................................18
3.2.1 Dome Camera Ⅰ............................................................................................................................18
3.2.2 Dome Camera Ⅱ............................................................................................................................20
3.2.3 Dome Camera Ⅲ............................................................................................................................21
3.3 Bullet Camera Installation ........................................................................................................................23
3.4 Cube Camera Installation..........................................................................................................................26
3.5 Mini Dome Camera Installation .............................................................................................................28

Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
1
Chapter 1 Introduction
Network camera is a kind of embedded digital surveillance product that combines the features
of both traditional analog camera and net DVS (Digital Video Server). Due to the embedded Linux
operation system and the latest Davinci hardware platform of TI, the system operates with high
scheduling efficiency. Furthermore, the firmware is burned in the flash, which makes the product
small, reliable and highly stable.
1.1 Network camera Functions and Features
Functions:
Advanced compression with high compression ratio.
Heartbeat Function: The server can acquire real time operating performance of the network
camera through the heartbeat function.
Two way audio.
Alarm Function: Motion detection, Video tampering, Network disconnect , IP address conflict,
Storage exception.
Support reset button, dual stream, mobile phone surveillance.
User Management: Support multilevel right management. The administrator can create up to
15 separate users with different right levels, which highly improves the system security.
Build-in WEB browser and support IE browsing.
Software Development Kit (SDK) is available.
Compression Functions:
Support 1 channel video signal and standard H.264 encoding compression, which supports both
variable bit rate and variable frame rate; besides, you can self-define both the video quality and
its compressed bit rate.
Remote Control:
The product offers a 10M/100M self-adaptive Ethernet interface.
Support TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, PPPoE, SMTP, NTP protocols.
Set the parameters, browse real time videos or check the camera performance through
software or IE, and store the compressed bit rate through network.
Support remote upgrades and maintenance.
1.2 Applications
This camera is ideal for remote control network applications. E.g.:
1. Network surveillance for bank counters, supermarkets and factories.

Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
2
2. Remote surveillance for nursing homes, kindergartens and schools.
3. AI janitors.
4. AI building/district management systems.
5. Self-service systems of power plants.
6. Pipelining and warehouse monitoring.
7. Surveillance for airdrome, railway station, bus stop etc.

Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
3
Chapter 2 Physical Description
The network cameras can be classified to eight types according to the physical structure: Box
camera Ⅰ, Box camera Ⅱ,Box camera Ⅲ, Dome camera Ⅰ,Dome camera Ⅱ,Bullet Camera, Cube
Camera, Mini Dome Camera.
2.1 Box Camera Physical Description
2.1.1 Box Camera Ⅰ
Camera description:
Figure 2.1.1
Serial NO.
Description
1
CS Lens mount
2
Back Focus Ring
3
Auto iris interface
4
10M/100M self-adaptive Ethernet interface
5
AUDIO IN: Audio input interface
AUDIO OUT: Audio output interface
6
SD: SD card slot
7
VIDEO OUT: Video output interface
8
Power supply
9
PWR: Power LED indicator
10
D+, D-: RS-485 interface
11
Ground
12
1A, 1B: Alarm output interface

Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
4
Serial NO.
Description
13
IN, G: Alarm input interface
Back Focus Adjustment:
When it still fails to realize precise focusing after having confirmed the correct lens interface, the
back focus adjustment may be required.
Operate the following steps:
Tighten the lens firstly and then loosen the fixed back focus ring; rotate the lens slowly until the
video image turns to be clear, and finally tighten and lock the back focus ring.
Camera connection:
Figure 2.1.2
Note:
The type of auto-iris interface is square four-hole type,
and the definition of each pin as shown:
Video
DC
1
Power
Damp-
2
NC
Damp+
3
Video
Drive+
4
GND
Drive-
Auto iris interface with video driving uses three pins:
Power, Video and GND; Auto iris interface with DC driving
uses four pins: Damp+, Damp-, Drive+ and Drive-.

Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
5
2.1.2 Box Camera Ⅱ
Camera description:
Figure 2.1.3
Serial NO.
Description
1
CS Lens mount
2
Auto iris interface
3
Bracket mounting holes
4
F1+ F1-, F2+ F2- ,F3+ F3-: Alarm output interface
5
T1,T2,T3, T4,GND: Alarm input interface
6
D+, D-: RS-485 interface
7
10M/100M self-adaptive Ethernet interface
8
VIDEO OUT: Video output interface
9
RESET: Reset the camera
10
TXD, RXD, GND: RS-232 interface
11
Power supply
12
PWR: Power LED indicator
13
SD: SD card slot
14
AUDIO IN: Audio input interface

Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
6
Serial NO.
Description
15
AUDIO OUT: Audio output interface
16
Ground
Back Focus Adjustment:
When it still fails to realize precise focusing after having confirmed the correct lens interface, the
back focus adjustment may be required.
Operate the following steps:
Tighten the lens firstly and then loosen the fixed back focus ring; rotate the lens slowly until the
video image turns to be clear, and finally tighten and lock the back focus ring.
Camera connection:
Figure 2.1.4
Note:
The type of auto-iris interface is square four-hole type,
and the definition of each pin as shown:
Video
DC
1
Power
Damp-
2
NC
Damp+
3
Video
Drive+
4
GND
Drive-
Auto iris interface with video driving uses three pins:
Power, Video and GND; Auto iris interface with DC driving
uses four pins: Damp+, Damp-, Drive+ and Drive-.

Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
7
2.1.3 Box Camera Ⅲ
Camera description:
Figure 2.1.5
Serial NO.
Description
1
Lens mount
2
Back Focus Ring
3
SD: SD card slot
4
Auto iris interface
5
10M/100M self-adaptive Ethernet interface
6
VIDEO OUT: Video output interface
7
AUDIO OUT: Audio output interface
8
PWR: Power LED indicator
9
Power supply
10
MIC IN: Audio input interface
11
D+, D-: RS-485 interface
12
IN, G: Alarm input interface
13
1A, 1B: Alarm output interface
14
Ground
15
RESET: Reset the camera
Back Focus Adjustment:
When it still fails to realize precise focusing after having confirmed the correct lens interface, the
back focus adjustment may be required.
Operate the following steps:
Tighten the lens firstly and then loosen the fixed back focus ring; rotate the lens slowly until the
video image turns to be clear, and finally tighten and lock the back focus ring.

Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
8
Camera connection:
Figure 2.1.6
Note:
The type of auto-iris interface is square four-hole type,
and the definition of each pin as shown:
Video
DC
1
Power
Damp-
2
NC
Damp+
3
Video
Drive+
4
GND
Drive-
Auto iris interface with video driving uses three pins:
Power, Video and GND; Auto iris interface with DC driving
uses four pins: Damp+, Damp-, Drive+ and Drive-.

Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
9
2.2 Dome Camera Physical Description
2.2.1 Dome Camera Ⅰ
Camera description:
Figure 2.2.1
Serial NO.
Description
1
Video output interface
2
PWR: Power LED indicator
3
Dial switch
4
10M/100M self-adaptive Ethernet interface
5
D+, D-: RS-485 interface
6
Alarm IN: Alarm input interface
Alarm OUT: Alarm output interface
7
AIN: Audio input interface
AOUT: Audio output interface
8
Power supply
Address& protocols dial switch. The defining for dial switch: , from 1 to 5 dial
switch functions are shown as following:
Switch Function
ON
OFF
1
SHARP
SOFT
2
AES
AI
3
BLC
OFF
4
FL
ON
5
NAGC
SAGC

Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
10
Camera connection:
Figure 2.2.2
2.2.2 Dome Camera Ⅱ
Camera description:
Figure 2.2.3

Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
11
Serial NO.
Description
1
10M/100M self-adaptive Ethernet interface
2
AUDIO IN: Audio input interface
3
AUDIO OUT: Audio output interface
4
D+, D-: RS-485 interface
5
ALARM
IN, G: Alarm input interface
1A, 1B: Alarm output interface
6
Power supply
Camera connection:
Figure 2.2.4
2.2.3 Dome Camera Ⅲ
Camera description:
Figure 2.2.5

Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
12
Serial NO.
Description
1
10M/100M self-adaptive Ethernet interface
2
INITIAL SET: Reset the camera
3
AUDIO OUT: Audio output interface
4
MIC IN: Audio input interface
5
D+, D-: RS-485 interface
6
1A, 1B, 2A, 2B: Alarm output interface
7
IN1, GND, IN2, GND: Alarm input interface
8
Power supply
Camera connection:
Figure 2.2.6
2.3 Bullet Camera Physical Description
Camera description:

Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
13
Figure 2.3.1
Serial NO.
Description
1
10M/100M self-adaptive Ethernet interface
2
Power supply
3
IN, G: Alarm input interface
1A, 1B: Alarm output interface
4
D+, D-: RS-485 interface
5
AUDIO IN, G: Audio input interface
AUDIO OUT, G: Audio output interface
Camera connection:
Figure 2.3.2
2.4 Cube Camera Physical Description
Camera description:

Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
14
Figure 2.4.1
Serial NO.
Description
1
Microphone hole
2
Micro SD card solt
3
LINK: Network status LED indicator.
When the network is connected, the LED flickers in green.
4
Power LED indicator, It turns solid red when power is applied to the unit
5
Lens
6
ETHERNET: 10M / 100M self-adaptive Ethernet interface
7
RESET: Reset all parameters to factory default settings
8
Speaker hole
9
Power supply
10
Bracket mounting holes, used to fix the camera to the bracket
Note:
When the camera is power up, press the ‘RESET’ button for about 10 seconds, then all parameters,
including user name, password, IP address, port number, etc., will be reset to the factory default
settings.
Camera connection:
Figure 2.4.2

Installation Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
15
2.5 Mini Dome Camera Physical Description
Camera description:
Figure 2.5.1
Serial NO.
Description
1
Back box
2
Lens
3
P: Power LED indicator, It turns solid red when power is applied to the unit.
4
Bottom board
5
Bottom board set screw hole
6
Lens set screw
7
S & L: Network status LED indicator.
When the network is connected, the “S”LED turns solid orange, while the “L”LED flickers in
green.
8
RESET: Reset all parameters to factory default settings.
Note:
When the camera is power up, press the ‘RESET’ button for about 10 seconds, then all parameters,
including user name, password, IP address, port number, etc., will be reset to the factory default
settings.
Camera connection: