HIK VISION UD07275B User manual

0
Network Box Camera
Quick Start Guide
UD07275B

Network Box Camera·Quick Start Guide
1
1
Quick Start Guide
COPYRIGHT © 2017 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures,
graphs are the properties of Hangzhou Hikvision Digital Technology
Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”).
This user manual (hereinafter referred to be “the Manual”) cannot
be reproduced, changed, translated, or distributed, partially or
wholly, by any means, without the prior written permission of
Hikvision. Unless otherwise stipulated, Hikvision does not make any
warranties, guarantees or representations, express or implied,
regarding to the Manual.
About this Manual
This Manual is applicable to Network Box Camera.
The Manual includes instructions for using and managing the
product. Pictures, charts, images and all other information
hereinafter are for description and explanation only. The
information contained in the Manual is subject to change, without
notice, due to firmware updates or other reasons. Please find the
latest version in the company website
(http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the
properties of Hikvision in various jurisdictions. Other trademarks and
logos mentioned below are the properties of their respective
owners.

Network Box Camera·Quick Start Guide
2
2
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND
FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,
AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL
HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE
LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR
LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF
DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF
THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL
NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL
RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS
PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE
APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT
THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

Network Box Camera·Quick Start Guide
3
3
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATER PREVAILS.
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help
FCC Conditions

Network Box Camera·Quick Start Guide
4
4
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied
accessories too are marked with "CE" and comply
therefore with the applicable harmonized European
standards listed under the EMC Directive 2014/30/EU, the RoHS
Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see:
www.recyclethis.info
2006/66/EC (battery directive): This product
contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union.
See the product documentation for specific battery
information. The battery is marked with this symbol,
which may include lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the battery to your
supplier or to a designated collection point. For more information
see: www.recyclethis.info

Network Box Camera·Quick Start Guide
5
5
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards
requirements.
Safety Instruction
These instructions are intended to ensure that user can use the
product correctly to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings
Serious injury or death may occur if any of the
warnings are neglected.
Cautions
Injury or equipment damage may occur if any of the
cautions are neglected.
Laws and Regulations
The device should be used in compliance with local laws,
electrical safety regulations, and fire prevention regulations.
Transportation
Keep the device in original or similar packaging while
transporting it.
Power Supply
The input voltage should conform to IEC60950-1 standard: SELV
(Safety Extra Low Voltage) and the Limited Power Source. Refer
to the appropriate documentation for detailed information.
DO NOT connect multiple devices to one power adapter,
to avoid over-heating or fire hazards caused by overload.
Make sure the plug is properly connected to the power socket.

Network Box Camera·Quick Start Guide
6
6
System Security
The installer and user are responsible for password and security
configuration and its settings.
Battery
Improper use or replacement of the battery may result
in explosion hazard.
Replace with the same or equivalent type only. Dispose of used
batteries in conformance with the local codes.
Maintenance
If the product does not work properly, please contact your
dealer or the nearest service center. We shall not assume any
responsibility for problems caused by unauthorized repair or
maintenance.
A few device components (e.g., electrolytic capacitor) require
regular replacement. The average lifespan varies, so periodic
checking is recommended. Contact your dealer for details.
Cleaning
Please use a soft and dry cloth when clean inside and
outside surfaces of the product cover. Do not use
alkaline detergents.
Using Environment
Make sure the running environment meets the requirement of
the device. The operating temperature shall be -30 °C to 60 °C
(-22°F to 140 °F), and the operating humidity shall be 95% or
less (no condensing).

Network Box Camera·Quick Start Guide
7
7
When any laser equipment is in use, make sure that the
device lens is not exposed to the laser beam, or it may
burn out.
Do not expose the device to high electromagnetic radiation or
dusty environments.
For indoor-only device, place it in a dry and well-ventilated
environment.
Do not aim the lens at the sun or any other bright light.
Emergency
If smoke, odor, or noise arises from the device,
immediately turn off the power, unplug the power
cable, and contact the service center.
Time Synchronization
Set up camera time manually for the first time access if the local
time is not synchronized with that of the network. Visit the
camera via Web browse/client software and go to time settings
interface.
0505021070911

Network Box Camera·Quick Start Guide
8
8
Table of Contents
1 Appearance Description ..............................................................9
2 Installation ...............................................................................11
2.1 Memory Card Installation .................................................11
2.2 Lens Installation.................................................................12
2.3 CameraMounting...............................................................13
2.3.1 Pendant Mounting .................................................13
2.3.2 Wall Mounting........................................................ 15
2.4 Mounting with Housing ....................................................17
2.5 Zoom and Focus Adjustment ............................................22
3 Setting the Network Camera over the LAN .................................23
Wiring.................................................................................233.1
Activating the Camera .......................................................243.2
Activation via Web Browser ..................................243.2.1
Activation via SADP Software................................ 253.2.2
Modifying the IP Address ..................................................273.3
4 Accessing via Web Browser .......................................................30
5 Operating via Hik-Connect App..................................................32
5.1 Enable Hik-Connect Service on Camera...........................32
Enable Hik-Connect Service via SADP Software... 325.1.1
Enable Hik-Connect Service via Web Browser .....335.1.2
5.2 Hik-Connect Setup.............................................................35
5.3 Adding Camera to Hik-Connect ........................................ 35
5.4 Initializing the Memory Card ............................................ 37

Network Box Camera·Quick Start Guide
9
9
1Appearance Description
The overview of the box camera is shown below:
1
2
3
4
5
6
7*8 9 10
11
12
13
14
15
16
17
18
19
20
OverviewFigure 1-1

Network Box Camera·Quick Start Guide
10
10
DescriptionTable 1-1
No.
Description
No.
Description
1
Lens Mount
2
Auto-iris Interface
3
Power Indicator
4
¼ -20 UNC Screw Hole
5
LAN(PoE 802.3af)
6
Power Supply (12 VDC/24 VAC)
7
Reset
8*
ABF (Auto Back Focus)
9
Memory Card Slot
10
Video Out
11
Grounding Screw
12
Power Output (12 VDC, 200mA)
13
Grounding
14
Audio Input
15
Audio Output
16
Grounding
17
Alarm Output
18
RS-485
19
Grounding
20
Alarm Input
Note:
Power indicator: red stands for starting and blue for working.
To reset the camera default parameters, you need to press and
hold the RESET button and power on the camera. After the power
on of the camera, you must still press and hold the Reset button
for about 10 seconds.
ABF is supported by certain camera models.

Network Box Camera·Quick Start Guide
11
11
2Installation
Before you start:
●Make sure the device in the package is in good condition and all
the assembly parts are included.
●The standard power supply is 12 VDC, 24 VAC or PoE (802.3af),
please make sure your power supply matches with your
camera.
●Make sure all the related equipment is power-off during the
installation.
●Check the specification of the products for the installation
environment.
●Make sure that the wall is strong enough to withstand four
times the weight of the camera and the bracket.
For the camera that supports IR, you are required to pay attention to
the following precautions to prevent IR reflection:
●Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing reflection.
2.1 Memory Card Installation
Steps:
1. Insert the memory card to memory card slot on the rear panel of
the camera.
2. (Optional) If you want to unmount the memory card, push to get it
ejected.

Network Box Camera·Quick Start Guide
12
12
Memory
Card
Memory Card InstallationFigure 2-1
2.2 Lens Installation
Before you start:
The lens shown below is only for demonstration.
Lens InstallationFigure 2-2

Network Box Camera·Quick Start Guide
13
13
Steps:
1. Fit the lens (not supplied) to the camera and rotate it to get it
tightened.
Notes:
Install the adapter ring to the lens interface if a C-mount lens is
used.
A manual-iris lens can be directly installed to the camera
without plugging the power cable of the auto-iris to the
auto-iris interface.
2. Plug the auto-iris cable to the auto-iris interface.
2.3 CameraMounting
2.3.1 Pendant Mounting
Before you start:
Pendant mount is not included in package. If you adopt this
mounting style, you need to prepare a mounting bracket in advance.
The shown pendant mount is for demonstration.
Steps:
1. Install the pendant mount to the ceiling with the supplied screws.

Network Box Camera·Quick Start Guide
14
14
Nut
Install the MountFigure 2-3
2. Screw the camera to pendant mount and tighten the nut.
3. Adjust surveillance angle
Adjusting
Knob
Adjust Surveillance AngleFigure 2-4

Network Box Camera·Quick Start Guide
15
15
1). Loosen the adjusting knob.
2). Hold the camera body to adjust panning and tilting position.
3). Tighten the knob after adjustment.
4. Adjust zoom and focus level. Refer to Section 2.5.
2.3.2 Wall Mounting
Before you start:
Wall mount is not included in package. If you adopt this mounting
style, you need to prepare a mounting bracket in advance. The
shown wall mount is for demonstration.
Steps:
1. Separate the pedestal from the wall mount.
Pedestal
Separate PedestalFigure 2-5
2. Fix the pedestal to camera body.
Fix Pedestal to CameraFigure 2-6

Network Box Camera·Quick Start Guide
16
16
3. Install the wall mount to wall.
4. Install the pedestal together with the camera back to wall mount.
Install Camera to Wall MountFigure 2-7
5. Adjust the surveillance angle.
1). Loosen tilt adjusting screw. Tighten the screw after adjusting.
2). Loosen pan adjusting screw. Tighten the screw after adjusting.
Tilt Adjusting
Screw
Pan Adjusting
Screw
Adjust Surveillance AngleFigure 2-8
6. Adjust zoom and focus level. Refer to Section 2.5.

Network Box Camera·Quick Start Guide
17
17
2.4 Mounting with Housing
Before you start:
The shown housing is not included in package. You need to prepare
one if you adopt this mounting style.
Also, for housing mounting, you need to prepare suitable brackets in
advance.
Steps:
1. Screw the camera to mounting plate of the housing.
Install Camera to Mounting PlateFigure 2-9
2. Screw the mounting plate together with the camera back to the
housing.
Note:
Push the camera as close to the window as possible.

Network Box Camera·Quick Start Guide
18
18
Window
Cable Outlet
Install Camera to HousingFigure 2-10
3. Connect and route cables through the cable outlet of the housing.
1). For network, alarm input and output, and audio input and
output, plug corresponding plugs to the rear panel of the
camera. See Figure 1-1.
2). For power supply and RS-485, see the following figure.

Network Box Camera·Quick Start Guide
19
19
Heater
To camera
RS-485 -, yellow
RS-485 +, orange
To camera
12 VDC -, black
12 VDC +, red
AC24V IN
~~
DC12V RS-485
+
-
To power source
24 VAC
+
-
Heater
To camera
RS-485 -, yellow
RS-485 +, orange
To camera
24 VAC To power source
24 VAC
AC24V IN
~~
DC12V RS-485
+
-
+
-
Figure 2-11 Wiring Board in Housing