Hillsdale Furniture 4149-831 User manual

STEP 1
Begin assembly by attaching each Leg
Panel (G) together by crossing and fitting
in place. Once in place, attach the Stool
Top (F) to the top of each piece and sec re
with 4 Allen Bolts (A), 4 Spring Washers
(C) & 4 Flat Washers (D) to hold in place.
Do not f lly tighten bolts for this step.
STEP 2
Next attach the S pport Ring (H) to the
inside of each Leg Panel (G) by aligning
holes and sec ring with 1 Allen Bolt (B) per
each leg. Tighten all bolts from Steps 1 and
2 sing the Allen Wrench (E) that has been
provided.
STEP 3
Insert each Plastic Cap (K) into the bottom
of each leg on the Leg Panels (G) for floor
protection. The assembly of the 24 Stool
is now complete.
For assembly of the 30 Stool, please see
Page 2.
ABE
HARDWARE LIST
(4) Allen Bolts 1/4 x 1-5/8
(4) Allen Bolts 1/4 x 1
(4) Spring Washers 1/4
(4) Flat Washers 1/4
(1) Allen Wrench
(8) Allen Bolts 1/4 x 1/2
(4) Plastic Foot Caps
A
B
C
D
E
J
K
PARTS LIST
(1) Stool Top
(2) Leg Panels
(1) S pport Ring
(4) Leg Extensions
F
G
H
I
BACKLESS STOOL
Model #4149- 31
Model #4150- 31
CARE & MAINTENANCE : The to ch of a soft cloth is all the maintenance the finish will ever need. Please do not se harsh or abrasive cleaners for
polishing, as they may ca se damage to the finish. Periodic checks are recommended to make s re that all bolts, screws and n ts are sec rely tightened.
TOOLS NEEDED FOR ASSEMBLY
ALLEN WRENCH (SUPPLIED)
Examine all packaging material for small parts that may have come loose d ring shipment. Periodic checks are recommended to ins re
that all components are in proper position, tight and free from damage. Keep this assembly instr ction for f t re reference. Ad lt
assembly is req ired. C stomer Service Phone N mber: 502-562-0000
Revised Date:
02-12-09
Page 1 of 2
FURNITURE, LLC.
HILLSDALE
CD
D
C
A
D
C
A
B
F
H
G G
J
KK

LEG EXTENSION ASSEMBLY
Insert each Leg Extension (I) into the
bottom of each leg on each Leg Panel
(G) and align holes. Once in place
sec re with 2 Allen Bolts (J) from the
inside per each leg. Tighten all bolts.
The assembly is now complete.
BACKLESS STOOL
Model #4149- 31
Model #4150- 31
CARE & MAINTENANCE : The to ch of a soft cloth is all the maintenance the finish will ever need. Please do not se harsh or abrasive cleaners for
polishing, as they may ca se damage to the finish. Periodic checks are recommended to make s re that all bolts, screws and n ts are sec rely tightened.
Examine all packaging material for small parts that may have come loose d ring shipment. Periodic checks are recommended to ins re
that all components are in proper position, tight and free from damage. Keep this assembly instr ction for f t re reference. Ad lt
assembly is req ired. C stomer Service Phone N mber: 502-562-0000
Revised Date:
02-12-09
Page 2 of 2
FURNITURE, LLC.
HILLSDALE
G G
J
J
I
I
I
G