Hillsdale Furniture Jasmine 1119-010 User manual

CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
QTYPART
8A
12C
HARDWARE QTYPART HARDWARE
8
12
B
D
1E 4F
GFF
C
CD
D
STEP5
Insert both ends of each
Plywood Slat (K) onto the
Front and Rear Rails (I &
J) and secure with 8
Wood Screws (A). See
Figure 1. The assembly is
now complete.
STEP1
Begin assembly by attaching the Feet (L)
to the Side Panels (H).
STEP2
Attach the Back Panel (G) to the back of each Side Panel (H) by aligning the
holes and securing with 2 Allen Bolts (F), 2 Spring Washers (D) & 2 Flat Washers
(C) from the backside per each end. Do not fully tighten bolts for this step.
STEP3
Next attach the Rear Rail (J) to the back of each Side Panel
(H) by aligning the holes and securing with 2 Allen
Bolts (B), 2 Spring Washers (D) and 2 Flat
Washers (C) per each end. Do not fully tighten
bolts for this step.
STEP4
Attach the Front Rail (I) to the inside of each Side
Rail (H) in the front by aligning the holes and
securing with 2 Allen Bolts (B), 2 Spring Washers
(D) and 2 Flat Washers (C) per each end. Tighten
all bolts from Steps 1 through 3 using the Allen Wrench
(E) that has been provided.
H
H
J
I
BB
B
B
C
C
C
C
D
D
D
DL
LA
FIGURE 1
AA
G
G
AA
AA
AA
AA
AA
AA
AA
AA
*
Trundle Sold Separately
K
K
HARDWARE LIST
A (8) 30mm Wood Screws
B (8) 1/4” x 50mm Allen Bolts
C (12) 1/4” Flat Washers
D (12) 1/4” Spring Washers
E (1) 1/4” Allen Wrench
F (4) 1/4” x 65mm Allen Bolts
PARTS LIST
G (1) Back Panel
H (2) Side Panels
I (1) Front Rail
J (1) Rear Rail
K(14) Plywood Slats
L (4) Feet
Page 1 of 1
UPHOLSTERED DAYBED
Trundle Panel
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to
insure that all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference.
Adult assembly is required

CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
HARDWARE LIST
A (8) 1/4” x 20mm Allen Bolts
B (24) 20mm Wood Screws
C (6) Metal Casters
D (8) Flat Washers
E (8) Spring Washers
F (1) 1/4” Allen Wrench
G (40) 30mm Wood Screws
PARTS LIST
H (1) Trundle Front Panel
I (2) Trundle Side Panels
J (1) Trundle Back Panel
K (1) Left End Bottom Panel
L (5) Center Bottom Panels
M (1) Right End Bottom Panel
QTYPART
8A
6C
HARDWARE QTYPART HARDWARE
24
8
B
D
8E 1F
40G
STEP1 - Figure 1
Attach each Trundle Side Panel (I) to the backside of the Trundle Front Panel (H) by aligning holes
and securing with 2 Allen Bolts (A), 2 Spring Washers (E) and 2 Flat Washers (D) per each end. Do
not fully tighten bolts for this step.
STEP2 - Figure 1
Attach the Trundle Back Panel (J) to the REMAINING side of each Trundle Side Panel (I) also by
aligning holes and securing with 2 Allen Bolts (A), 2 Spring Washers (E) and 2 Flat Washers (D) per
each end. Tighten all bolts from steps 1 and 2.
EE
E
E
E
E
E
E
E
E
I
I
J
H
A
A
A
E
A
A
A
A
A
A
A
D
D
D
D
D
D
D
D
D
D
D
D
FIGURE 1
Page 1 of 2
DAYBED TRUNDLE
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to
insure that all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference.
Adult assembly is required

CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
BB
C
C
B
B
C
CB
B
B
B
C
C
C
CB
B
C
C
J
STEP3 - Figure 2
Attach the Casters (C) to the bottom of each Trundle Front Panel (H) and Trundle Back Panel (J) using
4 Wood Screws (B) per caster. Tighten all screws with philips head screwdriver (not included).
H
H
J
STEP4 - Figure 3
Finally insert Left End Bottom Panel (K) on to both Front & Rear Panels (H & J) and
secure with 2 Screws (G) per side. Attach Center Bottom Panels (L) and Right
Bottom Panel (M) with 6 Wood Screws (G) each. Tighten all screws
with philips head screwdriver (not included).
The assembly is now complete.
FIGURE 2
FIGURE 3
K
L
L
L
L
L
M
GG
G
G
GG
G
G
G
GG
G
G
G
G
GG
G
G
G
G
GG
G
G
G
G
GG
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
GG
G
G
GG
G
G
GG
G
G
GG
G
G
GG
G
G
GG
G
G
GG
G
Page 2 of 2
DAYBED TRUNDLE