Hillsdale Furniture 90008 User manual

HARDWARE LIST
(4) Allen Bolts M6 x 56mm
(8) Allen Bolts M6 x 30mm
(1) Allen Wrench
(12) Hex Nuts
(24) Flat Washers
(1) Hex Wrench
A
B
D
E
F
PARTS LIST
(2) Bed Frames
(4) onnectors
(4) Frame Plates
(4) Support Poles
G
H
J
K
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure
that all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult
assembly is required. ustomer Service Phone Number: 502-562-0000
A
Date:
12/11/09
Page 1 of 2
FURNITURE, LLC.
HILLSDALE
SUSPENSION DECK
Model #90008
B
DE F
C
G
K
K
K
K
STEP 1
Begin assembly by examining all pieces to ensure they have not been damaged during shipping.
Insert each Support Pole (K) into ONE Bed Frame (G) by sliding in place and inserting the end
into the open hole on the inside of the frame. Once in place carefully guide the REMAINING Bed
Frame (G) in place by sliding each pole in place. See next page for more assembly instructions.

CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for
polishing, as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
Date:
12/11/09
Page 2 of 2
FURNITURE, LLC.
HILLSDALE
STEP 2
Secure each Bed Frame (G) together using the 4 onnectors (H). Fit together and secure in place
with 1 Allen Bolt (A), 1 Flat Washer (E), on the other side 1 Flat Washer (E) & 1 Hex Nut (D).
Tighten all bolts and nuts using the Allen and Hex Wrenches ( & F) that have been provided.
SUSPENSION DECK
Model #90008
G
J
G
J
J
J
This Side Up
A
E
E
D
H
GG
G
G
H
H
H
H
This illustration shows
the frame upside down.
STEP 3
Attach each Frame Plate (J) to the end of each Bed Frame (G) by
aligning holes and securing with 2 Allen Bolts (B), 2 Flat Washers (E)
from the outside and 2 Flat Washers (E) & 2 Hex Nuts (D) from the
inside to conceal bolt ends. Only hand tighten bolts and nuts.
STEP 4
Attach the Mattress Frame to each post included with your bed
purchase using the hardware included with the bed/daybed.
Once each frame end has been secured in place, tighten all
bolts and nuts from Step 2 using the hardware provided.
G
J
E
D
E
D
B
E
E
B